Related Products
|
|
|
 |
- Overview
- More Info
- Reviews
Lids lower gently--never crushing fingers.
|
Lids lower gently--never crushing fingers. Support opens lids to a maximum angle of 105° and is 8-7/8'' long overall. They have nickel plated steel arms with cream colored plastic housing. Compact design makes these supports ideal for installing in tight places. Use one support per 43 inch/lbs. Figure inch/lbs with this formula: (lid wt. X front to back size) divided by 2.
Price for each support.
|
| |
Customer Reviews and Photos for:
Soft down support
|
Average Rating:
(4.2)
(15 customer reviews)
Add your review...
|
|
|
1) Submitted by
Jeff, from De Forest, WI
on 10/8/2009
Customer Rating: 
I used the soft down lid support to replace an old support on one of my daughters toy boxes and it works great. You can easily open the lid and also avoid any "pinched" fingers. I highly recommend it.
|
|
2) Submitted by
Tom Mahoney, from Washington, NJ
on 9/28/2009
Customer Rating:
I re-finished an old chest for my year old Granddaughters toys and was concerned that the lid could slam down on her fingers. I ordered and installed the "soft-down support" hinge. Other then all dimensions being in mm's, which I converted and then discovered the template for location of the hardware! it was easy to install and works perfectly with a very slow and controlled closure of the lid. No worries for little fingers!
|
|
3) Submitted by
Ernie Mascarello, from Bellevue, NE
on 8/29/2009
Customer Rating:
I have built 10 of these toy boxes and used these closers on every one. The ONLY one I will use! No hurt fingers!!!
|
|
4) Submitted by
Donald Breazeale, from Holland, MI
on 1/24/2009
Customer Rating:
This is the second time I haave had to use a soft down lid suport for a toy box. I have found using two suports gives me the closing I need for little fingers. This box has stood the test of time, two little girls and one boy. I love everything but the instructions.
|
|
5) Submitted by
John Green, from Jacksonville, FL
on 8/26/2008
Customer Rating:
Another great product from Rockler.
Performs exactly as advertised.
Download template from "more info".
Installed in less than 5 minutes.
Thanks Rockler.
|
|
6) Submitted by
Stewart Wolff, from Port Jefferson Station, NY
on 6/28/2008
Customer Rating:
Kudos on a fine piece of engineering/design and construction that works better than I imagined possible. My wife's first reaction was "ugly", but the look on her face when the lid of her very old sweater chest closed magically, seemingly by itself, and not making a sound, was beyond price.
Yes, the instructions, diagrams, and measurements could be polished by someone who speaks and "thinks" in english, but nevertheless, the end result is very impressive.
Your company is on my list of "places to go" for hardware and woodworking items. Thank you.
|
|
7) Submitted by
Bruce Horken, from Queen Creek, AZ
on 1/5/2008
Customer Rating:
After three other failed attempts on a toy box closer, I finally got one that worked. The problem was that I had to clear 1 1/2 inches from the hinge on the back wall due to the way I did the trim. Other closers are made for 3/4 inch and would either bind on themselves or not allow the lid to fully open. This was a fairly heavy lid of 3/4 plywood with on 1 1/2 oak trim around the edge. Two closers worked perfectly.
|
See all
15 reviews...
|
Home  Hardware Trunk, Chest and Case Hardware Lid Supports Soft down support
|
|
CART
