
- Tools
-
Hardware
- Drawer Slides
-
Hinges
- Cabinet Hinges
- Furniture Hinges
- Box Hinges
- Specialty Hinges
- European Hinges
- Semi-Concealed Hinges
- Partial Wrap Hinges
- Demountable Hinges
- No-Mortise Hinges
- Butt Hinges
- Piano Hinges
- Quadrant Hinges
- Lid Support Hinges
- Small Box Hinges
- Pivot Hinges
- Sewing Machine Hinges
- Butler Tray Hinges
- Glass Door Hinges
- Concealed Hinges
- Hinge Accessories
- Hinge Installation Bits
-
Knobs and Pulls
- Kitchen & Bath Knobs and Pulls
- Furniture Knobs and Pulls
- Black Knobs and Pulls
- Brass Knobs and Pulls
- Bronze Knobs and Pulls
- Chrome Knobs and Pulls
- Color Knobs and Pulls
- Copper Knobs and Pulls
- Glass/Ceramic Knobs and Pulls
- Iron Knobs and Pulls
- Nickel Knobs and Pulls
- Pewter Knobs and Pulls
- Rust Knobs and Pulls
- Stainless Steel Knobs and Pulls
- White Knobs and Pulls
- Wood Knobs and Pulls
- Fasteners
- Lighting
- Bed Hardware
- Project Hardware
- Storage & Organization
- Supplies
- Only @ Rockler
- New Products
- Deals
- Outlet
-
Quick Order
- Home /
- Wood Turning /
- Turning Accessories /
- Excelsior Mini Lathe Replacement Belt
Overview
Replacement belt for the Excelsior Mini Lathe (#33207, sold separately). Available online only.
What's included
(1) Excelsior Mini Lathe Replacement Belt
Technical Details
- Manufacturer Part Number: WW100181 RPL BELT
- Weight (lbs): 0.0500
Frequently Bought Together

Regular Price: $75.59
Special Price $49.99
Bed Extension for Excelsior Mini Lathe MC-1018
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:

If your question is about more than one item, click + to add them.

Browse 6 questions
Browse 6 questions
and 55 answers
Why did you choose this?
Rockler Store
My other belt broke.
Valerie N
on Apr 17, 2018
I bought a OIT model WL-1000 and it did not come with a belt. This is the only belt I can find for a wood turning lathe.
Steven C W
on Apr 16, 2018
My old one lasted 10 years, I'm glad Rockler stocks it
Tom H
on Mar 27, 2018
For backup as my lathe is a couple of years old and worried belt could wear out.
ANTHONY B
on Mar 7, 2018
the belt broke and I have to replace it
John F
on Jan 8, 2018
My belt is getting worn. I waited till something else I needed went on sale to get free shipping
Roger W
on Dec 21, 2017
I received a hickory wood lathe from. 2003 and it belt was frayed
Robert N
on Nov 26, 2017
is this the belt for the nova II comet lathe
Edwin M
on Nov 18, 2017
The belt broke on my Fisch Lathe and I have not been able to find it any where else
Jamie K
on Oct 9, 2017
the drive belt on my excelsior lathe broke
Don N
on Oct 5, 2017
You had the belt, first time purchase
Steve M Z
on Aug 29, 2017
belt broke... wont work without one
Greg D
on Jun 5, 2017
Just as a spare
Kendall H
on May 28, 2017
Bougfht my first Excelsior lathe last week from Rockler in Orlando Fl. Love" Pen Turning ". It,s a
blast. Wouldn,t drive without a spare tire in the trunk.
blast. Wouldn,t drive without a spare tire in the trunk.
paul f
on May 21, 2017
Good to have a spare
John C
on Mar 25, 2017
I need a replacement belt when ever mine goes out. So far 1 year running it has been great.
Rocky P
on Feb 26, 2017
Spare part
Dennis B
on Jan 28, 2017
Just to have a spare on hand
Thomas M
on Dec 27, 2016
Just got the Excelsior Mini Lathe for Christmas. Don't want to risk down time from a broken belt!
Chris A
on Dec 26, 2016
It's always good to have a back up belt just in case your in the middle of a project and the belt breaks or on the weekend.
Richard F
on Dec 17, 2016
replacements for broken belt on my Fisch Mini Lathe
FRANCESCA Q
on Dec 8, 2016
Need a spare.
Tom M
on Nov 25, 2016
For a replacement belt on my HF mini lathe and to have a backup belt.
John H
on Oct 8, 2016
Needed a replacement, reviews were good.
William L
on Oct 3, 2016
YOU NEVER KNOW
M I
on Aug 9, 2016
My other belt broke.
Valerie N
on Apr 17, 2018
this is the only place that had this
brenda c
on Apr 16, 2018
I bought a OIT model WL-1000 and it did not come with a belt. This is the only belt I can find for a wood turning lathe.
Steven C W
on Apr 16, 2018
Belt broke and had to replace.
James P
on Mar 30, 2018
My old one lasted 10 years, I'm glad Rockler stocks it
Tom H
on Mar 27, 2018
it was the correct size at the fairest price I could find.
Eugene G
on Mar 15, 2018
For backup as my lathe is a couple of years old and worried belt could wear out.
ANTHONY B
on Mar 7, 2018
I own the lathe and my belt broke
Edmond G
on Feb 19, 2018
the belt broke and I have to replace it
John F
on Jan 8, 2018
The belt on my Excelsior mini lath was broken.
Doug B
on Jan 5, 2018
My belt is getting worn. I waited till something else I needed went on sale to get free shipping
Roger W
on Dec 21, 2017
You had the item I wanted and I like your service.
david w
on Nov 28, 2017
I received a hickory wood lathe from. 2003 and it belt was frayed
Robert N
on Nov 26, 2017
mine broke and I found it here
Thomas E S
on Nov 18, 2017
is this the belt for the nova II comet lathe
Edwin M
on Nov 18, 2017
delta discontinued
chuck l
on Nov 13, 2017
The belt broke on my Fisch Lathe and I have not been able to find it any where else
Jamie K
on Oct 9, 2017
spare belt for lathe
peter m
on Oct 5, 2017
the drive belt on my excelsior lathe broke
Don N
on Oct 5, 2017
I needed a replacement belt for my Excelsior mini lathe. This is the correct belt.
Marsha M. S
on Sep 1, 2017
You had the belt, first time purchase
Steve M Z
on Aug 29, 2017
I chose this item because I need an Excelsior Mini lathe Replacement belt..
Adam T
on Jul 26, 2017
belt broke... wont work without one
Greg D
on Jun 5, 2017
Extra reserve lathe belt
Emory G
on May 29, 2017
Just as a spare
Kendall H
on May 28, 2017
good to have a spare
Joseph Z
on May 24, 2017
Bougfht my first Excelsior lathe last week from Rockler in Orlando Fl. Love" Pen Turning ". It,s a
blast. Wouldn,t drive without a spare tire in the trunk.
blast. Wouldn,t drive without a spare tire in the trunk.
paul f
on May 21, 2017
REPLACE A BELT ON OLD FISCH LATHE
TIM J
on May 1, 2017
Good to have a spare
John C
on Mar 25, 2017
my broke
John B
on Mar 24, 2017
I need a replacement belt when ever mine goes out. So far 1 year running it has been great.
Rocky P
on Feb 26, 2017
good price
stephen s
on Feb 5, 2017
Spare part
Dennis B
on Jan 28, 2017
My belt is wearing out.
Earl F
on Jan 7, 2017
Just to have a spare on hand
Thomas M
on Dec 27, 2016
I have a cabinet shop and theses are the supplies I need
Ken B
on Dec 26, 2016
Just got the Excelsior Mini Lathe for Christmas. Don't want to risk down time from a broken belt!
Chris A
on Dec 26, 2016
Replacement part
Everett H
on Dec 17, 2016
It's always good to have a back up belt just in case your in the middle of a project and the belt breaks or on the weekend.
Richard F
on Dec 17, 2016
because I needed it
steve l
on Dec 17, 2016
replacements for broken belt on my Fisch Mini Lathe
FRANCESCA Q
on Dec 8, 2016
online easy
Ralph E
on Dec 5, 2016
Need a spare.
Tom M
on Nov 25, 2016
saw on line will fit my lathe good reviews
kenny c
on Oct 16, 2016
For a replacement belt on my HF mini lathe and to have a backup belt.
John H
on Oct 8, 2016
It's an online only item and i felt a spare would be good to have.
Martis W
on Oct 5, 2016
Needed a replacement, reviews were good.
William L
on Oct 3, 2016
Broken belt!!
CAROL J
on Aug 24, 2016
YOU NEVER KNOW
M I
on Aug 9, 2016
belt wore out
P M
on Aug 5, 2016
this is the only place that had this
brenda c
on Apr 16, 2018
Belt broke and had to replace.
James P
on Mar 30, 2018
it was the correct size at the fairest price I could find.
Eugene G
on Mar 15, 2018
I own the lathe and my belt broke
Edmond G
on Feb 19, 2018
The belt on my Excelsior mini lath was broken.
Doug B
on Jan 5, 2018
You had the item I wanted and I like your service.
david w
on Nov 28, 2017
mine broke and I found it here
Thomas E S
on Nov 18, 2017
delta discontinued
chuck l
on Nov 13, 2017
spare belt for lathe
peter m
on Oct 5, 2017
I needed a replacement belt for my Excelsior mini lathe. This is the correct belt.
Marsha M. S
on Sep 1, 2017
I chose this item because I need an Excelsior Mini lathe Replacement belt..
Adam T
on Jul 26, 2017
Extra reserve lathe belt
Emory G
on May 29, 2017
good to have a spare
Joseph Z
on May 24, 2017
REPLACE A BELT ON OLD FISCH LATHE
TIM J
on May 1, 2017
my broke
John B
on Mar 24, 2017
good price
stephen s
on Feb 5, 2017
My belt is wearing out.
Earl F
on Jan 7, 2017
I have a cabinet shop and theses are the supplies I need
Ken B
on Dec 26, 2016
Replacement part
Everett H
on Dec 17, 2016
because I needed it
steve l
on Dec 17, 2016
online easy
Ralph E
on Dec 5, 2016
saw on line will fit my lathe good reviews
kenny c
on Oct 16, 2016
It's an online only item and i felt a spare would be good to have.
Martis W
on Oct 5, 2016
Broken belt!!
CAROL J
on Aug 24, 2016
belt wore out
P M
on Aug 5, 2016
Where are the instructions on how to replace?
A shopper
on Apr 29, 2015
BEST ANSWER: How to replace the belt.
-Remove protective cover plate (not referenced in the parts list) from the headstock end of #1-Bed. This allows access to the motor pulley.
-Loosen #33 Socket Head Screw and move #31 Motor Plate upward to take tension off #26 Drive Belt.
-Remove #20 Back Lid from #19 Headstock. This allows access to #25 Drive Pulley.
-Loosen #28 Set Screw ...and remove #22 Balance Wheel (left hand threading). This allows access to #14 Headstock Spindle.
-Carefully, with wooden mallet or other means that will not damage the threading, drive out the #14 Headstock Spindle toward the center of the bed.
-Install new belt on #25 Drive Pulley.
-Reverse these steps to reassemble.
-Remove protective cover plate (not referenced in the parts list) from the headstock end of #1-Bed. This allows access to the motor pulley.
-Loosen #33 Socket Head Screw and move #31 Motor Plate upward to take tension off #26 Drive Belt.
-Remove #20 Back Lid from #19 Headstock. This allows access to #25 Drive Pulley.
-Loosen #28 Set Screw ...and remove #22 Balance Wheel (left hand threading). This allows access to #14 Headstock Spindle.
-Carefully, with wooden mallet or other means that will not damage the threading, drive out the #14 Headstock Spindle toward the center of the bed.
-Install new belt on #25 Drive Pulley.
-Reverse these steps to reassemble.
- Reply(2)
- Inaccurate
- Steve Staff on Apr 30, 2015
BEST ANSWER: How to replace the belt.
-Remove protective cover plate (not referenced in the parts list) from the headstock end of #1-Bed. This allows access to the motor pulley.
-Loosen #33 Socket Head Screw and move #31 Motor Plate upward to take tension off #26 Drive Belt.
-Remove #20 Back Lid from #19 Headstock. This allows access to #25 Drive Pulley.
-Loosen #28 Set Screw ...and remove #22 Balance Wheel (left hand threading). This allows access to #14 Headstock Spindle.
-Carefully, with wooden mallet or other means that will not damage the threading, drive out the #14 Headstock Spindle toward the center of the bed.
-Install new belt on #25 Drive Pulley.
-Reverse these steps to reassemble.
-Remove protective cover plate (not referenced in the parts list) from the headstock end of #1-Bed. This allows access to the motor pulley.
-Loosen #33 Socket Head Screw and move #31 Motor Plate upward to take tension off #26 Drive Belt.
-Remove #20 Back Lid from #19 Headstock. This allows access to #25 Drive Pulley.
-Loosen #28 Set Screw ...and remove #22 Balance Wheel (left hand threading). This allows access to #14 Headstock Spindle.
-Carefully, with wooden mallet or other means that will not damage the threading, drive out the #14 Headstock Spindle toward the center of the bed.
-Install new belt on #25 Drive Pulley.
-Reverse these steps to reassemble.
- Reply(2)
- Inaccurate
- Steve Staff on Apr 30, 2015
Vote for the best answer above!
What are the dimensions of the belt, width and length?
peter
on Jul 12, 2015
BEST ANSWER: Width 1/4 inch. Circumference 24 7/8 inch
- Reply
- Inaccurate
- Duane J on Jul 13, 2015
- Purchased on Mar 23, 2015
BEST ANSWER: Width 1/4 inch. Circumference 24 7/8 inch
- Reply
- Inaccurate
- Duane J on Jul 13, 2015
- Purchased on Mar 23, 2015
Vote for the best answer above!
Will this fit the central machine lathe(10-18)? Model 65345.
Thomas A
on Aug 6, 2015
BEST ANSWER: This belt generically is a "240J3" or a "240J Poly-V belt with 3 ribs". The 240 is the length in tenths of inches; so 24" long. The "J" specifies the height profile and the rib spacing; and then the 3 specifies how many ribs with that spacing. Hope this is of help.
- Reply(1)
- Inaccurate
- Steve Staff on Aug 6, 2015
BEST ANSWER: This belt generically is a "240J3" or a "240J Poly-V belt with 3 ribs". The 240 is the length in tenths of inches; so 24" long. The "J" specifies the height profile and the rib spacing; and then the 3 specifies how many ribs with that spacing. Hope this is of help.
- Reply(1)
- Inaccurate
- Steve Staff on Aug 6, 2015
Yes, I ordered two replacements for my 65345 lathe and they are working just fine.
- Reply
- Inaccurate
- Tracy N on Aug 20, 2015
Vote for the best answer above!
does this drive belt fit a turncrafter model #TCLPRO?
Duane S
on Oct 14, 2016
BEST ANSWER: I'm sorry, but I really don't know, I assume that it will because so many of those Chinese mini lathes are all made from the same plan.
- Reply
- Inaccurate
- ALAN G on Oct 14, 2016
- Purchased on Mar 19, 2015
BEST ANSWER: I'm sorry, but I really don't know, I assume that it will because so many of those Chinese mini lathes are all made from the same plan.
- Reply
- Inaccurate
- ALAN G on Oct 14, 2016
- Purchased on Mar 19, 2015
Vote for the best answer above!
will this belt fit a jet jml-1014?
M Y
on Feb 4, 2017
Reviews
4.7 / 5.0
28 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
20
7
1
0
0
Drive belt for wood lathe.
Great,fast service !!! Tops in every way !!!This replacement belt works great !!!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Replacement
The new belt works just like new, and shipping was faster than expected. Very pleased.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Excelsior
Small belt but seems to do the job.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Fits Fisch TC-90-100 Lathe
As noted by a previous reviewer, this belt will fit a Fisch TC-90-100 midi lathe. It appears to be of good quality. So far I have turned 7 bowls and vases with it with no sign of wear. I was disappointed with belts from the my prior source - they did not last very long.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Working Great!
Needed a replacement belt for my CM 10x18 mini Lathe.
Installed the belt and was up and turning in a flash.
Working great once again. Thanks Rockler
Installed the belt and was up and turning in a flash.
Working great once again. Thanks Rockler
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Belt for Lathe
Fit correctly and works great
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Bench top lathe
Quick service, belt fit perfectly
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
general 25-100
Bought to replace General 25-100M1 lathe belts, fits perfect and seems to last longer than OEM. (240-j3)
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Hard to beat.
Got this belt because mine broke. Had turned a number of pens on my lathe. When changing to slower speed, I noticed that the belt was cracked and would soon break. PANIC ATTACK! I got online and ordere two replacement belt right away. Belts came in timely manor and were easily replaced. Be sure to align belt pulleys carefully when installing. My belt broke after about 6 months use due to poor alignment of belt when changing lathe speeds....MY fault entirely. Great product, but get a spare before you need it. Inexpensive insurance against downtime!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Belt for lathe
Was easy to install. Only trouble I had was moving motor to right position to tighten belt. Only replaced belt because carbon brushes needed to be replaced.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Nice belt! Easy to purchase on Internet. Very convenient .
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Replacement belt for my Fisch mini lathe
Fisch is no longer in the lathe building business and my drive belt broke. I couldn't find any information of where to get a replacement drive belt. I thought that I would take a chance and this one fits exactly. Please pass the word along for anyone else who needs a replacement belt for their Fisch TC90-100
- Was this review helpful? Yes (7) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (7) No (0)
- Flag as Inappropriate
Perfect
This was a perfect replacement for my HF mini lathe. This belt seems to be much more durable than the original one. Only time will tell.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Replacement belt for mini lathes
This belt worked perfect right out of bag. price was well worth the hrs saved by not shopping around. Thks Rockler.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
customer service was outstanding!!
The replacement belt was just right and has performed flawlessly.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Very Good Belt
You may find this belt hard to find. However, look to Rocklet first. I found cheaper belts but they were cheaper in every way. Shop Rockler first, you won't regret it. Easy to order and fast delivery.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
April 22, 2014
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great insurance
I always want a back up plan for maintaining my power tools and buy a spare belt when your machine is new reduces the need for hunting done key parts later.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Haven't had a chance to try it out. The original is still going strong. But it came earlier than expected and in good condition.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great belt
Great belt just need them in stock. Order way in advance.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
I like the replacement
The replacement belt works just like the original. My only comment it that it took a call to
Rockler for me to understand how to do the replacement. Once I had their directions it was an easy fix. I love my lathe and intend to use it for many years.
Rockler for me to understand how to do the replacement. Once I had their directions it was an easy fix. I love my lathe and intend to use it for many years.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Very good belt
The belt that came with my mini lathe lasted long enough to make 4 1/2 pens before it broke. I ordered two replacement belts from Rockler (never hurts to have a spare), and have made 13 1/2 pens. The replacement belt is showing minimal ware, and I still have a spare! When you put the new belt on, it is very importent to line up your two pulleys. If they are not lined up properly you will get excessive ware which will shorten your new belts lifespan. This is a good product at a fair price.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
December 27, 2014
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Excalibur belt.
When you buy this, and you will, buy extras. They do have a tendency to wear out pretty quickly if you are turning much more than pens.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
More Suggestions
x
Price:
Actual Price:
Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.