Reface cabinets like a pro with this inexpensive and easy-to-use trimming guide!
Designed for easy
removal of veneer ''ears'', aids in trimming off excess veneer flush with the
back side of the face frame, square-cutting rail and stile joints, and more.
According to ''Refacing Cabinets'' author Herrick Kimball, ''The Rockler Veneer
Trimming Guide is an essential tool for any kitchen refacing project.'' It’s
designed for easy removal of veneer ''ears'', aids in trimming off excess veneer
flush with the back side of the face frame, square-cutting rail and stile joints,
and more. Makes perfect butt splices in both vertical and horizontal applications.
Slots make edge trimming a snap! Black-plated steel.
1) The Veneer Trimming Guide is designed to easily key into the correct
position
2) Simply position the guide and slice along the long edge to trim the
"Ears" on veneered cabinet rails and stiles for perfectly matched
butt joints.
3) Trim veneer off flush with the back side of the face frame easier,
faster and more accurate with this guide. Position the guide over a stile
or rail, insert utility knife in trimming slot, and draw both the guide
and knife along the length of the wood.
4) Slots in our trim guide make edge trimming a snap.
Refacing Cabinets
- Make an old kitchen look new! Step-by-step instructions, 130 photos and 50 illustrations
lead to professional results. 160 pages. Softcover - #90595
1) Submitted by
Chris Albright, from Round Rock, TEXAS
on 1/2/2009
Customer Rating:
While you can perform the same tasks with a good straight edge, this tool makes it easier. Due to the variety of 90 degree profiles on this tool, keeping the tool locked (positioned) on a stile or rail while running the blade to make a cut reduces the opportunity to miscut the veneer.
2) Submitted by
Amy Holloway, from Waco, TX
on 5/6/2008
Customer Rating:
We have had a tool similar in the past, []and we were unable to find something similar. We were very excited to find your product. We teach a class for our franchisees on Refacing cabinets and the Veneer Trimming Guide makes learning the process so much easier.
3) Submitted by
J Jones, from San Diego, CA
on 9/28/2008
Customer Rating:
This trim tool is a great idea, however it is not deep enough for a true 3/4" face frame. If you attempt to use it to trim the inside of a 3/4" frame, you'll end up with a small exposed section of the orginal frame that will not be covered with the veneer.
4) Submitted by
Jim Voogt, from Longmont, CO
on 6/19/2008
Customer Rating:
I found the product was not as easy to use as I expected. It required more accuracy on my part than I had hoped for.
"Recieved our order of glass and wire mesh. All items arrived intact, which was no surprise considering the impressive packaging.
I've dealt with what many companies consider appropriate packaging, which, at best is hit-and-miss.
The packaging methods you folks employ are second to none.
Thank you.
J.J.Marchese" -
J.J.M.
- 03/02/2009 See more...
CART
