Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
ROUTER
BIT DIMENSIONS
Two
flutes, 90 Degree Angle.
Item
No.
A
B
C
D
90869
1/2"
7/16"
1/4"
1-1/4"
90880
3/4"
5/8"
1/2"
1-1/2"
A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality performance features include:
K10 and K20
grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
Customer Reviews and Photos for: V-Groove Router Bits
There are no customer reviews or photos for this product yet.
If you have used this product,
please click here
and tell us about it.
If you've used this product in a project,
we'd love to see a photo of your finished project.
You can post that here as well.
"I would like to start off by saying Thank You for such wonderful service. I will continue to use Rockler and only Rockler for all my woodworking needs.Your prices and customer service are all top notch.I'm just a beginner but with your web site and vast resouces I have been able to build some great things and can only get better. Thanks again you guys and gals really rock the woodworking people of AMERICA." -
Darrell Ford
- 03/14/2009 See more...
CART
Two
flutes, 90 Degree Angle.
If
you are not 100% satisfied with these bits, send them back for
a refund. 
These
larger bits are designed to be used in a 
