Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
ROUTER
BIT DIMENSIONS
Item
No.
A
B
C
D
E
92024
3/8"
3/16"
1/4"
1-1/4"
3/16"
92035
1/2"
3/16"
1/4"
1-1/4"
1/4"
Makes
a 3/8'' entry hole and blind slot for positive hanging on a
headed fastener.
Use the slot cutter to cut a horizontal slot for hanging pictures.
Or us the slot cutter to cut a vertical slot for hanging pictures
with a centered slot.
A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality performance features include:
K10
and K20 grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
Get
a great deal on these superior bits!
Buy 3 or more and get 10% off, or buy 6 or more and get 15%
off.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
Customer Reviews and Photos for: Hanging Slot Router Bits
1) Submitted by
John Miller, from Hillsboro, NH
on 12/18/2008
Customer Rating:
I used this product for a hanging slot in a cutting board and it worked excellent.
2) Submitted by
Ron Smith, from Mukwonago, WI
on 8/18/2008
Customer Rating:
The 1/2" diameter Hanging Slot Bit works really good as a T-Slot cutter for your custom fixtures. I used it to make an adjustable miter extender on my Incra V27 miter gauge and a fence adaptor for my router table.
3) Submitted by
John Crouse, from Wolcott, NY
on 7/19/2009
Customer Rating:
First this is a key hole bit in my book. That said, I should send you the info on making a jig for doing that.
4) Submitted by
David Johnson, from Escanaba, MI
on 4/7/2008
Customer Rating:
I used this product on a sign, so it could be hung up on a wall. It worked excellent, thank you.
"Thank you for your exceptional service. I ordered on a Sunday, received an e-mail on Monday telling me the order had shipped, and it was at my front door on Tuesday. Great products and great service." -
[Name withheld]
- 11/26/2008 See more...
CART
Makes
a 3/8'' entry hole and blind slot for positive hanging on a
headed fastener.
Get
a great deal on these superior bits!
If
you are not 100% satisfied with these bits, send them back for
a refund. 
These
larger bits are designed to be used in a 
