Small Toggle Clamp

Once attached to a bench or fixture, this clamp is simple to use and ideal for light-duty applications. With up to 150 pounds of holding power, it works great as a quick-action hold down clamp for jigs or for keeping work pieces in place.

Bottom of rubber clamp foot adjusts from level with mounting service to 7/16" below mounting surface. Total length with arm extended 2-5/16''. Length of arm only, extended is 1-1/4''. Mounting plate is 1" W x 1-1/16" L.

Customer Reviews and Photos for: Small Toggle Clamp Average Rating: (4.6) (8 customer reviews) Add your review...

1) Submitted by Jim Nummerdor on 2/7/2008 Customer Rating: Its the first time I'd use a clamp on a jig and I don't think I'll ever go back to the old way of doing it. They worked great.

2) Submitted by Dale Grabowski, from Double Oak, TX on 1/20/2008 Customer Rating: I make many jigs and fixtures in my shop for routing and especially on the CNC machine. The toggle clamps are fantastic. easy to install and adjust right clamping pressure to assure accurate hold downs and fast fexible wood changes. I have an assortment for ready use as the jigs dictate.

3) Submitted by John Reininger, from Omaha, NE on 1/3/2008 Customer Rating: I had purchased a pen press kit from another supplier and after a couple of months, the press mechanism bent and became useless. I replaced the press mechanism with a "Large Action Push Clamp" #32103 and doubt I will ever have to replace it again. This push clamp is built to last!! Great product!

4) Submitted by Donald Turnbaugh, from Grants Pass, OR on 12/21/2007 Customer Rating: I am a retired tool & die maker. We used the toggle clamp in the machine shops and now in my wood shop. They are great for holding parts in jigs and fixtures.

5) Submitted by Steve, from Aiken, SC on 10/28/2007 Customer Rating: I saw the clamp in a video on making cabinets doors, the clamp is used as part of a jig for holding the cabinet door rail steady while routing the edge, the clamp works great, the construction of the clamp is solid. I recommend this style clamp.

6) Submitted by Jim Jones, from Rochester, NY on 10/22/2007 Customer Rating: I have often woundered about using these toggle clamps for jigs in place of clamps. I decided these would fit an application for clamping the mitered joints of the stiles I am fastening with pocket screws for custom kitchen cabinets I am currently building. All of the end panels and returns are 45 and 60 degrees to each other. I created the jigs for accurate assembly and consistant gluing results. These are strong and easy to work around. All necessary hardware was included. Something of a surprise was an mounting screw in each package. I am thoughly pleased and have more jig applications planned along with additional purchases of more toggles. The opinion is you cannot have enough clamps, well you can add toggles to that opinion as well.

7) Submitted by Charley, from Racine, WI on 3/18/2009 Customer Rating: While the clamps worked well I purchased 10 units and they came with two different size locking nuts making it a pain to use. This required me to have 4 different wrenches while setting up the jigs.

See all 8 reviews...