Toy Box Lid Supports

Prevents lids from accidentally slamming shut on fingers. Measures approximately 5'' long pivot to pivot in extended position. Use this formula to choose your supports: (lid wt. times front to back size) divided by 2 = inch lbs range. Use on toy boxes with 3/4'' thick backs. Statuary bronze finish.

Price per individual lid support.

Please click on the links below to learn more about this product.

Toy Box Lid Support Datasheet

Customer Reviews and Photos for: Toy Box Lid Supports Average Rating: (4.6) (59 customer reviews) Add your review...

1) Submitted by Steve Hodgson, from Mount Vernon, IL on 11/1/2009 Customer Rating: I used two of your lid supports along with a full length piano hinge for a 42"x24"x3/4" lid and, after some adjustment due to trim, it worked great. The box stores have a similar, lower quality item that didn't work. My Granddaughter will love her new toy box.

2) Submitted by Gene Starkey, from Bethel Park, PA on 9/11/2009 Customer Rating: I used two lid supports, four hinges, and full extension drawer slides that I purchased from Rockler. Samantha's Toy Chest (click to see full-size picture in new window)

3) Submitted by Ken, from Peoria Heights, IL on 8/3/2009 Customer Rating: Great customer service. I got them delivered sooner than expected. Easy to install and work great. My Nieces Toybox (click to see full-size picture in new window)

4) Submitted by Tracy Bush, from Pflugerville, TX on 7/28/2009 Customer Rating: Excellent product! Box (made out of red cedar) was 48" long and the lid weighed approxmately 17lbs. We used (1) right side mount, 95-125 Inch lbs. and (1) left side mount, 95-125 Inch lbs., Lid Supports an works flawlessly. The lid stays where you put it. We have a 2-1/2 year old boy that plays inside of anytime he is outside. He keeps his outdoor toys in the box so it gets a lot of use. The lid will stay in place for as long as you leave it there. I never have to worry about it accidentaly falling down. My only complaint is that the supports do not have a few elongated slotted holes, which would allow you to adjust the support up and down for intial intall. You have to be certain that they are perfectly set in place the first time. Otherwise the Lid Supports works flawlessly and I highly recommend to anyone. I will defintely buy again for my next project. (click to see full-size picture in new window)

5) Submitted by Richie Rich, from NHP, NY on 7/11/2009 Customer Rating: These hinges work as advertised. I had a 33"x33" (3/4 birch ply) top to my built-in bench for toy storage. It had hinges already, but I needed them to stay open like everyone else here. First I thought the pneumatic actuators for storm doors- it works for a little bit but it didn't make the lid stay open. It closed smoothly, though. I still wanted a better solution and luckily, I found these! In the pic, note the defeated actuators hanging down ready for removal and all the holes from the drilling! Grrr! Wish I found this product earlier! Thanks Rockler. the hinges in action!

6) Submitted by Brad, from Roscoe, IL on 6/26/2009 Customer Rating: Great inexpensive piece of hardware. Huge coffee table top (48" X 25.5") made of 100% solid oak is easily supported and suspended in order to ensure safe access to the interior. Functions great and looks great. Make sure you adequately calculate the number of supports you will need. Great! Coffee Table w/ Storage Cabinet (click to see full-size picture in new window)

7) Submitted by Bill Kearns, from Spring Hill , FL on 6/10/2009 Customer Rating: After contacting Rockler for further information regarding the "Toy Box Lid Supports", I purchased an extra one to make sure that the top of a Hope Chest wouldn't come down too easily. These supports were easy to attach and they absolutely did the trick. A big "Thanks" to the Rockler team. "I'll be back". Bill Kearns

See all 59 reviews...