Horizontal and Vertical raised panel bits manufactured to Rockler's exacting standards. Use vertical bits for straight panels; horizontal bits cut both straight and curved panels.
ROUTER
BIT DIMENSIONS
Bearing
1/2"
Item
No.
A
B
C
D
21522
2-1/2"
1/2"
1/2"
1-3/4"
Cove
Item
No.
A
B
C
D
21151
1-1/4"
1-5/8"
1/2"
1-1/2"
A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality performance features include:
K10 and K20
grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
Get
a great deal on these superior bits!
Buy 3 or more and get 10% off, or buy 6 or more and get 15% off.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
"Rockler is the leading name in Woodworking around here...always has what you need and more...Great service to boot. Thanks for being there." -
Dick Farino
- 01/04/2009 See more...
CART
Bearing
1/2"
Cove
Get
a great deal on these superior bits!
If
you are not 100% satisfied with these bits, send them back for
a refund. 
These
larger bits are designed to be used in a 
