Related Products
|
|
|
 |
- Overview
- More Info
- Reviews
Marking screw holes becomes simple, quick and accurate! Creates absolutely accurate spacing for pull borings.
|
Pulls off perfectly aligned drawer pulls and knobs time after time.
Get the highest degree of accuracy in knob and pull placement -- and protect your investment in drawers and doors -- with the JIG IT® for Drawer Pulls and Knobs. The marking template offers spacing for boring of 2-1/2 inches, 3 inches, 3-1/2 inches, 3-3/4 inches, 4 inches, and the European 96mm size. The handle lets you adjust your setback from the edge anywhere up to 4-1/2 inches, giving you positioning flexibility.
Our Center Punch is sized and designed for use specifically with this template. It indents the wood for perfect drill-bit alignment (and perfectly straight knobs and pulls!) every time.
The JIG IT® template, along with the Automatic Center Punch, ensures that you can achieve professional results quickly and easily on either assembled or unassembled doors and drawers! (JIG IT® for Drawer Pulls and Knobs is a marking system, and not intended for drilling.)
|
| |
Customer Reviews and Photos for:
Drawer Pull JIG-IT® Template
|
Average Rating:
(4.3)
(10 customer reviews)
Add your review...
|
|
|
1) Submitted by
Kris Karsten, from Fort Worth, TX
on 3/23/2009
Customer Rating: 
Great jig made adding 61 pulls to our kitchen, butler's pantry, master bath, and guest bath a snap. I replaced the wooden block supplied with the jig with t-track and a stop block mounted to it. I was able to go through all cabinets/drawers of the same size and punch the spots, make one adjustment and do the next size, etc. With the supplied punch (which is great) I had all of them marked in a matter of minutes. Then it was just a matter of drilling and screwing on the pulls.
|
|
2) Submitted by
Tom Briggs, from Gaithersburg, MD
on 6/1/2008
Customer Rating:
I just renovated my kitchen with new cabinets, and needed to install 50 handles. They are small stainless steel handles that don't allow any margin of error in drilling the mountig holes. The "Jig and Punch" did the job on all the doors as well as the drawers. This was a lifesaver.
|
|
3) Submitted by
Brian Miller, from Chalmette, LA
on 5/18/2008
Customer Rating:
At the last minute we decided to add door puuls to every cabinet and drawer in our newly purchased home. It would have been a nightmare without a tool as simple and affective. I've already loaned it out twice!!!
|
|
4) Submitted by
Daniel Bradshaw, from Lake Jackson, TEXAS
on 5/26/2008
Customer Rating: 
I purchased this jig based on the description that indicated up to 4 1/2" setback. I am installing 3 1/2" drawer pulls on 14 fairly large drawers, the fronts of which are slightly more than 8" tall. I thought that the stated setback would allow me to use the jig. However, the maximum setback I can get using the 3 1/2" holes is 3 3/8". In fact, the maximum setback possible with the jig I have is 3 7/8" and that is for the 4" and 96mm widths. Unless there is something I don't understand about the setup and use of this jig, it is really only marginally useful. Since I want my pulls centered top-to-bottom on the front, the maximum height possible for my drawer fronts is 6 3/4". That's a full 1 1/2" less that what I need. I would suggest, in future, that the jig be made rather a bit larger.
[Editor's note: Rockler is always seeking to improve its product line for our cusomer's needs. This comment is recognized to be correct and the suggestion to expand the range of the jig has been submitted to our product development team.]
|
|
5) Submitted by
Smiley Hatcher, from Asotin, WA
on 4/1/2008
Customer Rating:
I had some extra t-track so made my own "super" jig. worked great. Loved the hole punch.
|
|
6) Submitted by
Frank Petruso, from Florissant, MS
on 3/15/2008
Customer Rating:
Naturally the drawer pulls that were chosen for my first use of my new Drawer Pull Jig-it Template didn't match any of the holes in the jig. But that was no problem. After only a few minutes of laying out and drilling another pair of holes in my new template, I was quickly back to installing the drawer pulls. The jig works very well. And having a spring loaded center punch that centers in the holes included in the kit really helped out. A real time saver.
|
|
7) Submitted by
Linda Grubbs, from Galena, OH
on 3/6/2008
Customer Rating:
We used this product (that arrived in an unbelievable 2 days!) to install a ton of drawer pulls. Our project had come to a halt, because we didn't have the right tool!This is the right tool for installing drawer pulls by a regular non-carpenter type guy like my husband! They look great! Very easy to use this tool! A carpenter's call would have been $300, it made this tool a great buy! Thanks!
|
See all
10 reviews...
|
Home  Hand Tools and Shop Accessories Jigs, JIG IT's and T-Tracks Jigs and Rockler JIG ITs Drawer Pull JIG-IT® Template
|
|
CART
