Freud SD608 8'' Dial-A-Width Dado  Zoom

New

Freud SD608 8'' Dial-A-Width Dado

Item #: 29081
$274.97
Each In Stock

Overview

Now you can have dial capability with no wobble! Stacked dado set features dial hub for shim-free adjustability and laser-cut blade plates for extreme accuracy. Micro-grain carbide is designed specifically for glue line rips to ensure superior cut and maximum life. With precision-ground arbors for precise blade alignment.

No More Shims
Each "click of the dial adjusts the blade by .004" with an adjustable width range of 1/4" to 29/32".

Flawless Finish
Over size teeth allow for longer cutting life between sharpenings as well as more resharpenings. The unique shear angles of the teeth slice through any material with razor sharp precision.

Easy & Accurate
Mounts easily with no loose components. The adjustable hub allows users to fine tune the width of the dado without ever removing the dado cutter. Comes with 5 chippers (4 at 1/8" and 1 at 3/32"). When combined with the 3/32" chipper, the hub ensures a precise fit, even on undersized plywood.

Technical Details:

  • Fits arbor size of 5/8"
  • 1/4" to 29/32" range of adjustment.
  • 24 Tooth outer blades 4 Tooth chippers
  • Max RPM 6,000
  • Each click of the dial adjusts the blade by .004".
  • Adjusts easily to right or left operating machines.
  • Set includes 2 outside blades, 5 chippers, wrench, carrying case, and instructional poster and DVD.

 

Tech Spec

Brand Freud
Manufacturer Part Number SD608
Weight (lbs) 10.9600
Saw Blade Diameter 8"

What's included:

(1) Freud SD608 8" Dial-A-Width Dado

Technical Downloads:

Reviews

Customer Reviews

6 Review(s)

View All

Love the dial a width dado...

Scott D from Broken Arrow, OK Posted December 7, 2012
Love the dial a width dado set! easy to set up and use. My only issue is where do I send it for sharpening? I have spent 3 hours on Internet searching, reading, etc. and have only found a couple of out of state places.

Easy to use. Great results. Maximum...

Timothy S from Fort Madison, IA Posted July 21, 2008
Easy to use. Great results. Maximum dado capacity of blades limited by my Sawstop, but don't think I will ever need to cut a dado that wide.

I own a Bosch 4100-09 worksite...

Vincent N from Singapore, Singapore, Singapore Posted April 15, 2013
I own a Bosch 4100-09 worksite table saw and wanted to buy the Dial-a-width SD608 after reading a lot of good reviews about . After searching in vain on the Internet, I decided to take a risk {it cost me $$$ to import into Singapore!} and buy the SD608 Dial-a-width dado set. In a nutshell, the SD608 works on the Bosch 4100-09 table saw, but you can't use all the chippers to cut the maximum possible dado width on this table saw. The set is very well-constructed but has limitations for me. I can only safely cut up to a 9/16 inch dado {two outside blades plus two 1/8 inch chippers} on my table saw due to the design of my table saw. I have since come across a FAQ on Freud's website freudtools.com/t-608-compatible.aspx)  which spells out the compatibility of the dado set. For those Bosch 4100-09 owners who are considering buying the SD608, the measurements according to Freud's FAQ are as follows: 1. Inside arbor flange diameter {F}: 2 inches 2. Arbor length {AL}: 0.9 inches! Nut{N}=0.3 inches! 3. Wrench size {W}: 0.9 inches {23mm} Hopefully this review helps those Bosch 4100-09 table saw owners who are considering buying the SD608.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Freud Dado Blades

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X