Gel Stain - General Finishes - Golden Pine  Zoom

Gel Stain - General Finishes - Golden Pine

SPONTANEOUS COMBUSTION: This is a combustible product, dispose of product soaked rags in accordance with local ordinances.
product name price quantity total
GF Gel Stain, Golden Pine, 1/2 Pint Item #: 34569
In Stock
 
$9.49

Half Pint
$9.49
Store Availability
GF Gel Stain, Golden Pine, Quart Item #: 30459
In Stock
 
$21.99

Quart
$21.99
Store Availability
GF Gel Stain, Golden Pine, 1/2 Pint Item #: 34569
In Stock
 
Price:
$9.49
Half Pint
Quantity:
Total: $9.49

Store Availability
GF Gel Stain, Golden Pine, Quart Item #: 30459
In Stock
 
Price:
$21.99
Quart
Quantity:
Total: $21.99

Store Availability

Overview

The foolproof finishing system! Just wipe on with a clean cloth and you're ensured of professional quality results without brush marks. Stains dry to the touch in minutes. If you want a darker color, apply another coat of stain in only 6 hours. Once you're satisfied with the color, apply General Finishes's satin gel topcoat finish. Special formula repels dust between coats. No sanding needed between coats and no unpleasant smell. 

Note: Coded as a flammable substance by the U.S. Department of Transportation. Can not be shipped by air or through the postal system

How To Apply the Oil Base Gel Stain

Applying the gel stain is a simpler process than traditional stains that require sanding between coats. Before you apply your stain however you should prep your piece to ensure the stain covers correctly.

  1. Clean the surface you plan to stain
  2. Sand the surface. The suggested grit is 120-150 grit, you want to make sure that any existing finish that might be peeling is removed so the stain applies to the actual project surface.
  3. Apply the gel stain liberally with either a cotton cloth, natural bristle brush or a poly foam brush. (Be sure to test a small area of your project to make sure it is the finish you want and that the application method you've chosen is working well for you.)
  4. Wipe off the gel stain going with the grain using a clean dry cotton cloth or high quality paper towels.
  5. Let it dry, between coats give you project a chance to dry. Drying time varies based on the size and nature of your project as well as the environment it's located in. Normally drying time ranges from 6 to 12 hours.
  6. Repeat Steps 3-5 IF you want more coverage or you want a deeper/richer finish.

Suggested Topcoat

Topcoat can be used as a sealer over paints and stains or as a clean finish. If you want to use a top coat the recommended topcoat is Oil Based Arm-R-Seal Urethane Topcoat (sold separately).

Tech Spec

Brand General Finishes
Dry Time 6-12 hrs
Size Quart
Species Golden Pine

Technical Details:

  • Use: Interior and Exterior
  • Coating Needs: Normally 1 to 2 (additional coats can deepen the stain color)
  • Dry Time/Re-coat Time: 6 to 12 hours
  • Ideal Drying Conditions: 70° and 70% humidity
  • Cure Time: 14 Days
  • Application Method: Wipe on, foam brush, natural bristle brush or paint pad applicator.
  • Clean-Up: Mineral Spirits
  • Coverage: 200sq ft/qt
  • Recommended Uses: Any wood project or fiberglass doors

Technical Downloads:

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • How to Use Gel Stain: Preparation
  • How to Use Gel Stain: Applying as Stain
  • How to Use Gel Stain: Applying as Paint

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X