Cart

With rust-resistant plating and ball bearing pivot points. Zoom

Glider Bracket Hardware

Item #: 58330
Turn virtually any bench into a glider.
In Stock (online only)
$31.99
Pack
Sign up for price alert
Price Match
Add to Wishlist Find in Store

Overview

This unique hardware lets you turn virtually any bench into a glider! Measures 7-1/2" between centers with 1-1/4" offset. With rust-resistant plating and ball bearing pivot points. Mounts with common 1/4" dia. bolts (not included). Set of four.

Technical Details:

  • Offset project legs and sub-base 1-1/4" on each side.
  • Mounting holes should be vertically aligned 7-1/2" apart on opposing surfaces (between the project sub-base and project legs).
  • Rust-resistant plating and ball bearing pivot points.
  • Mounts with common 1/4" dia. bolts (not included).
  • Set of four.
  • Made in the USA.

What's included

(4) Glider Brackets

Technical Details

  • Weight (lbs): 1.0500

Technical Downloads

Questions and Answers

Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 13 questions Browse 13 questions and 74 answers
Why did you choose this?
Rockler Store
Review Ratings
Franklin C on Sep 19, 2016
Converting a teekwood bench to a glider!
Nicholas M on Aug 16, 2016
Review Ratings
Franklin C on Sep 19, 2016
Only place we could buy.
Robert H on Sep 8, 2016
Converting a teekwood bench to a glider!
Nicholas M on Aug 16, 2016
Building a love seat rocker glider for porch
Gary S on Aug 11, 2016
For a glider swing I am building
Robby W on Aug 6, 2016
building a swivel glider
SUSAN B on Aug 5, 2016
To replace my old ones
Steve S on Jul 24, 2016
need for project
richard m on Jul 15, 2016
Replacing a broken part on a purchased bench. I have used Roeckler before and was satisfied with those purchases.
Tom N on Jul 15, 2016
my husband is making a glider swing
Nancy W on Jun 23, 2016
I needed this hardware to complete the assembly of a wooden glider that was missing all of the hardware.
Richard Z on Jun 20, 2016
Good quality hardware!
Dave H on Jun 18, 2016
I'm buiding a glider and need these brackets. I like to order my supplies from Rockler.
Keith S on Jun 8, 2016
this is for a cedar glider
Mike H on Jun 3, 2016
Making a glider rocker
Gary B. P on Jun 3, 2016
I have built this glider in the past. In fact two gliders are kept outdoors in Michigan year around. The gliders are a superior product.
John I on May 21, 2016
Husband is building a glider and we couldn't find this hardware local.
Nancy C on May 14, 2016
Changing from swing to glider
Don M on May 11, 2016
Replace broken bracket on a glider
Eydie S on Mar 5, 2016
They seemed to be good quality and received good reviews
Leigh B on Mar 5, 2016
Building a gliding porch bench and this will do perfectly.
Joseph G on Feb 28, 2016
IT'S RECOMMENDED FOR THE PROJECT I'M WORKING ON
craig shorty t on Feb 23, 2016
Building a glider bench
Othel L on Feb 4, 2016
I am building a glider swing.
LeRoy P on Jan 24, 2016
for a special, traditional project
Donald B on Jan 20, 2016
Saw it on th einterent for a project that I am keen on doing
annu r on Jan 6, 2016
For building a glider chair.
Terry T on Jan 5, 2016
I am building a grain sieve for cleaning popcorn, so I have a glider chair which I looked at and found the name on them, then followed that to a link to your site, ordered two sets so we can double up the number of brackets for strength. Should work great for what I plan on building.
Ronald W on Dec 11, 2015
it was recomended by WOOD magazine
gary g on Dec 8, 2015
Project hardware needed
Scott W on Dec 2, 2015
I am building a glider and 2 matching chairs that will also be gliders.
Harlan M on Nov 21, 2015
making swinging baby cradle
Michael K on Nov 6, 2015
I am building my seventh baby cradle for a new grandson.
NORMAN S on Nov 5, 2015
I need to repair our glider.
james w on Oct 31, 2015
Smooth movement on gliders
Gilbert S on Oct 2, 2015
for glider rocker chair
toolman on Sep 7, 2015
Needed it for a project.
GLENN M on Sep 4, 2015
I purchased some in the past and they are of excellent quality for the price.
Dennis K on Sep 4, 2015
they work well on the glider I made
PAUL B on Aug 13, 2015
Needed them for my Glider swing that I am building
Roger G on Aug 1, 2015
building a glider
Richard K on Jul 27, 2015
repairing a glider. Finding these will ensure success
Mary D on Jul 22, 2015
have old glider and these will renew the swing
Conrad P B on Jul 20, 2015
Converting a hanging porch swing into a glider base since the condition of the porch beams is questionable. Rockler is the best quality, whereas other similar items on Amazon did not provide a reputable manufacturer in the description.
Edward H on Jul 20, 2015
It was in the magazine Outdoor Projects.
Bill P on Jul 16, 2015
Making a cedar glider..
Lu N on Jul 5, 2015
It was the closest I could find to the original.
Edward W on Jul 3, 2015
Best quality I have found.
Donald M on Jul 3, 2015
recommended by wood magazine for a glider i am building
Christopher R on Jun 27, 2015
it's what I needed for my project , rockler has it all
joseph c on Jun 24, 2015
Only place we could buy.
Robert H on Sep 8, 2016
Building a love seat rocker glider for porch
Gary S on Aug 11, 2016
I need longer gliders for a loveseat on a stand. 12" from center to center of mount. Any idea where I could find these?
rowena on Apr 20, 2015
What are the correct angles of the bracketts how far apart? Ours are not working out
A shopper on Jun 14, 2015
BEST ANSWER: Just converted a bench for my wife to a glider the legs of the bench where I mounted the glider was from front leg to rear leg 22.5 inch and the base the part that does not move under the bench was 25 inches so tops are further apart then the bottoms. I was using recovered gliders from and old glider stool they were 6.5 inches center of bearings long.
looking for glider bearing arm for jack post glider tete-a-tete where would I find it?
Ruth N on Jun 22, 2015
BEST ANSWER: Rockler carries the standard glider bearings. Best way to start, would be look in the Y.P. under bearings in your area. Some carry the, "Freeway" product line. Check with "Motion Industries", "Kaman Industrial", "Applied Industrial" or an independent in your area. One of them should be able to help you.
I am replacing worn-out hardware on a 30-year-old bench with the Rockler brackets here. Since these are different than my original hardware, I had to modify the bench to accomodate the longer brackets. My question - Should both brackets hang perfectly vertical to the points where they attach to the bench? The old hardware was connected so than the front bracket connected at about 7 o'clock and the rear bracket was at 6. This caused the bench to tip forward slightly when it swung forward. On the other hand, the 6/7 method provided a finite stopping point to the glider's swing. Since I don't have the original plans, I don't know the logic for connecting these brackets - 6/6 o'clock or some other...?
BradW on Jun 13, 2015
BEST ANSWER: My plans called for the hardware to be connected vertical.The bench moved about 6" from foreword to back.The unit never tipped and was very stable. I hope this helps you.SEE YOU AL
installed glider hardware, the swing will glide only a couple of inches forward and/or backwards? Is this all they glide or have installed wrong?
Kathy M on Dec 11, 2015
BEST ANSWER: I don't see how you could have installed them incorrectly. My glider works just the same as it did before. You just have to make sure that the front & back brackets aren't fighting each other.
What is the weight limit?
A shopper on Jul 2, 2015
BEST ANSWER: Don't know what the actual wt limit is. These do appear to be very stury and shold easily support 300 - 350 lbs. however no one has the ability to tell how they should be configured as far as spacinf between the front and back gliders. If you put them in the position as directed in the instructions the glider will only have a short choppy swing. Not the comfortable "glide" you would expect. And no one at rockler can give you an answer or seem to be willing to find an answer to this. Just like selling an item but not being able to give specs such as weight support.
I have old glider that glides on base with springs. Does any one have a parts breakdown on the foot?
kenny n on May 26, 2015
BEST ANSWER: I'm not sure of having a breakdown on the foot but you should be able to go by the old one and see what is needed. Mine was built of wood from the ground up, and I used the rockler glider bracket hardware. you might be able to go online and find something that would work. Hope this will help. Don H
Looking for Glider Bracket Hardware for baby cradle. Hoping this will work??
Thu J on Jan 3, 2016
BEST ANSWER: They should work just fine. Just be advised, they have a short arc. If you want something with a longer swing, you might want do do something similar but home built. If you use an oily wood like cocobolo for the swinger and brass plated screws to mount them, making sure the screws have a unthreaded portion for the swingers to mount on. Deb
I need these gliders with the hole 10.5" on center any suggestions?
Jerry D on Apr 29, 2016
BEST ANSWER: specific If you need these brackets, then you have only one choice, buy them,have a welding shop cut them and weld in a piece to get your needed length. As it is, the distance between centers is advertised as 7.5"
You can make a set out of wood, using something like the ones on Ebay (I would have given the link but Rockler blocked it ) and making the arms the length you need.
the plans I bought say I can buy the glider bracket for $19.99 when I shop for them they are $31.99 item #58330 what is up?
bud b on Feb 28, 2016
BEST ANSWER: I yhonk Woodcraft or Amazon has them for 19.99
what is the control number and where do I find it?
colin m on Jul 18, 2016
BEST ANSWER: Exactly what are you referring to ?
where can i buy the rubber grommets that go between the arm rest bracket and the seat support?
Jim T on Apr 19, 2016
BEST ANSWER: I Didn't use rubber grommets, I bolted directly to wood. Worked fine.

Reviews

Powered by TurnTo
4.6 / 5.0
38 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
29
5
3
1
0
I use the Glider Bracket Hardware...
I use the Glider Bracket Hardware in Single Gliders, Double Gliders, and footstool Gliders. I have tried other brands but this is the best one there is.
September 13, 2007
Thank you for supplying this set...
Thank you for supplying this set of brackets. I really enjoyed making this glider and the brackets worked out really well. The purchaser of this glider was so excited and she really loved it. I will definitely purchase more products from your site in the future.
September 3, 2008
Perfect
Works exactly as represented. Added to a memorial bench. Perfect.
June 17, 2015
Purchased
 1 year ago
Reliable product
I installed a set on a glider that sits in salt air and after 2 years it still works perfectly. Other sets were incorporated into three more glider designs and were easy to install. Good product that I recommend.
October 31, 2015
Purchased
 12 months ago
Woodworking Experience:
Intermediate
I just completed my 4th glider and I like the hardware very much!
July 29, 2016
Purchased
 2 months ago
Glider Rocker
Hand made Glider Rocker for my granddaughter.
Glider Rocker for my granddaughter
Glider Rocker for my granddaughter
April 14, 2016
Purchased
 6 months ago
Woodworking Experience:
Intermediate
Quality part
A quality part that adds value to my projects.
November 21, 2015
Purchased
 11 months ago
Woodworking Experience:
Beginner
glider
The glider brackets are sturdy and smooth. Would buy them again if I built another glider. I also recommend them.
November 6, 2015
Purchased
 1 year ago
Woodworking Experience:
Advanced
The glider brackets work great
July 20, 2016
Purchased
 3 months ago
Woodworking Experience:
Beginner
I used the glider brackets on...
I used the glider brackets on an old wicker glider rocker. The old glider brackets were rusted solid. The chair was in good shape and with the new gliders it glides like new. I will be buying more glider brackets to renew and give new life to the rest of the old patio furniture. Thanks for making it so easy to find, hard to find hardware.
September 12, 2007

More Suggestions

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.
Feedback X