Overview
Use this mortising bit for insetting hinge leaves, stair treads, and for general purpose routing of large shallow recesses. The shorter length of the cutter makes it easy to pull the bit back far enough for very shallow mortises. 1/4" shank.
What's included
(1) Rockler Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height x 1/4" Shank
Technical Details
- Brand: Rockler
- Weight (lbs): 0.0500
- Bit Type: Mortising
- Diameter: 1/2"
- Cutter Height: 3/4"
- Shank Size: 1/4"
- Flutes: 2
Product Warnings
WARNING Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product Related Articles
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions
Browse 2 questions
and 6 answers
Why did you choose this?
Rockler Store
I have a special use for this it on some boxes I am making. I will probably never use it for a mortising bit
Fred K
on Nov 1, 2017
To mortise using existing router
Steve H
on Mar 24, 2017
I have a special use for this it on some boxes I am making. I will probably never use it for a mortising bit
Fred K
on Nov 1, 2017
For hinges and other flat bottom mortising.
Richard P
on Aug 9, 2017
What is the overall height of the bit?
Reviews
5.0 / 5.0
2 Reviews
Clean cutting mortising bit.
It cut extremely clean hinge gains, just as I expected it to do.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Recently I modified the older version...
Recently I modified the older version of the Rockler Dovetail Jig with 1/2" template to make box joints. This involved clamping a spacer board underneath the template as both backer board and to prevent the router bit from chewing into the template and/or jig. The test piece is then clamped vertically and a 1/4" shank straight bit with a 1/2" collar is used to create perfect 1/2" box joints - provided the bit is precisely 1/2" in diameter. I used the hinge mortise style because of the shorter carbide length.At first I used another brand (Porter Cable) of bit, and the results were very poor. It turned out that the diameter of the bit was almost 1/64" too large, so the joint fit was off by almost 1/32". Then I ordered your 1/2" bit (which is as near to 1/2" as I can measure with calipers) and the results are absolutely perfect joints. Great product!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
August 5, 2008
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
