• by Matt Hocking

    Original Deck:

    Denise DeRose Turns to Purses

    Original Body:

    When woodturner Denise DeRose saw a woman carrying a small bandsawn box, about the size of a paperback book, as a handbag, “a light went off in my brain: why couldn’t it be a vessel? Woodturners make vessels. I started thinking about it, and I got consumed by it.”

    The first purses Denise made were canteen shaped, with a flat wood front and a channel for the strap inside the bag rather than outside. Lately, she’s started experimenting with therming, a traditional turning technique that’s been used for centuries to turn multiple objects mounted parallel on a lathe. Denise is using the technique for clutch style purses: she turns the two flat sides of the bag using the therming technique, band saws the edges, then cuts the pieces in half lengthwise and hollows out the inside by hand or with a Forstner bit.

    She’s also working on figuring out a routing system on a track for use in constructing her handbags. “You’ve got to be able to rout a shape that’s roundish but not round and has nice, clean lines,” she said.

    Denise herself is not a purse person. “I am the last kind of person you would think about when you think about handbags,” she said, with her focus being more on the functional than a fashion collection. As an art piece, though, “I think about handbags as a metaphor. What is it a woman brings with her? What is it she leaves behind? Few things are more connected to a woman than her handbag. What does a woman carry?”

    None of the handbags she makes exceeds 12 inches in diameter, and her source for many of those 12" pieces of wood is cutoffs from instrument companies. Like the wood used in a violin or guitar, handbag wood needs to be stable, and companies who sell billets for construction of those instruments often have cutoffs she purchases. “I do a lot of glue-ups, or turn two discs and hollow and laminate them together,” she said.

    One reason Denise likes the fiddleback maple she often gets from the instrument cutoffs is because of the way it takes a finish. “A handbag finish is crucial. It’s not something to just sit on a shelf; it’s in someone’s hands all the time.”

    She likes to use fabric dye, in a variety of colors, on the wood for her handbags, and fiddleback maple lends itself well to dying because of its chatoyance. Her Flower Drum Song bag, made from fiddleback maple dyed with red fabric dye with a lacquer finish, is one of her favorites: “It looks like wood and you can see that it’s wood, and it’s elegant and attractive.”

    She also uses pyrography in completing the finished designs on her purses. “It’s a good way of defining areas, especially if you use dye or paint. It burns fibers of the wood and keeps the paint or dye from traveling, so it will stop where the burn lines are.”

    Prior to her focus on handbags, Denise turned many salad bowls — including one, upon request, that was 30 inches in diameter, made from walnut. Getting that up on her lathe, Denise said, required “a jack and three teenage boys” — and it’s one reason she has rigged up a winch system from the I-beam of her garage shop. Mostly, though, the challenges of salad bowls focused on design elements: “Is it going to be deep, is it going to be shallow, is it going to have a big foot?”

    These days, in addition to design, she has to turn some of her focus to hardware. Since she can’t find hinges for some of the shapes she makes — she needs them to open round, rather than flat — she’s been doing some metalsmithing to make her own, such as those for a Bentou Box purse.

    She hasn’t counted all the purses she’s made so far, but says she has a long way to go. “I think creativity arises when you limit yourself. You don’t walk in the door of the shop and say, ‘What am I going to make today?’ You know what you’re going to make, and you work within the parameters.”

    For Denise, woodturning helps define those parameters. “Woodturning is my passion,” she said. “I’d much rather work with the lathe than with any other tool in the shop.

  • by Ian Kirby

    Using a Coachmaker and shoulder plane, you can cut an attractive, fielded, profiled panel that is perfect for creating the bottoms of drawers.

  • by Matt Hocking

    • Don’t skip grits. A rule of thumb is to start with 80-grit and move successively up to 180-grit.

    • Plan a consistent sanding pattern for your project, so you don’t skip over an area.

    • After each pass, make sure you have removed the scratch marks from the previous pass.

    • If you use a power sander, it’s OK to sand across the grain, but the last pass should be done by hand in the direction of the grain.

  • by Bill Hylton

    Making doors conventionally with plywood and standard bits is a hassle, but Instile and Rail bits cut clean, strong grooves in plywood easily.

  • by Rockler

    Learn about the different types of router bits designed for a CNC routing machine. Covers V-groove, End mill, Ball-nose and Surfacing bits.

  • by Rockler

    While it's possible to turn a bowl with just a faceplate on your lathe and maybe a shop-made jam chuck, it's a lot easier if you equip your lathe with a four-jaw chuck. As the name suggests, this type of chuck has four jaws, and these jaws can be adjusted in and out to hold a workpiece, either by contracting around a turned tenon or expanding into a recess you turn in the workpiece. Most chucks also include a large screw insert for mounting blanks for shaping and turning the tenon or recess. Four-jaw chucks are an investment, so you want to choose wisely. Here are a few considerations to keep in mind when deciding on the best chuck for you.

  • by Rockler

    DIY Drying Rack Project - learn how to make your own wall mounted, expanding drying rack.

  • by Rockler

    How to make your own Irish Parlor Clock, complete with diagrams and material / cut list.

  • by Rockler

    Whether you build it yourself, or buy it ready-made, here's what you need to know to get the best router table for your woodshop.

  • by Rockler

    One of the keys to creating unique and attractive cabinet projects is choosing the hardware, we delve into the process of selecting the right hinges.
Page 9 of 150