A Planer, or a Jointer?
posted on October 6, 2006 by Rockler

As you may know, Rockler has recently added a significant selection of professional class stationary power tools from Powermatic, Jet and Performax to it's list of offerings.  In honor of that, we'll be focusing in on stationary power tool tips and info on the Rockler blog in upcoming weeks.  Equipping a woodworking operation with top-of-the-line stationary tools represents a significant investment - many a small shop has been put together one tool at a time.  One of the most difficult questions to answer can be, "What should I get next?"  So, to start with, here are a few thoughts from expert woodworker and author Michael Dresdner in answer to a question on the merits of owning jointer, and whether they outweigh the value of a planer.

Q. I just cannot get through my thick head the difference between a jointer and a planer. I am on a limited budget so I cannot at this time afford both. I only work with pine at this point, which as you know, is often bowed or otherwise warped ... enough to see the curvature. So ... do I want a jointer or a planer to correct this?

A. Michael Dresdner: "In simple terms, a jointer is a motorized hand plane turned upside down. It does exactly what a hand plane does, except that you move the wood across it instead of moving it across the wood. A jointer creates a flat surface on wood, and yes, it can be used to correct bow and warp on one side of a board at a time.

"A planer is a thicknesser. It takes a thick board and makes it thinner. To use a planer, the board should already have one flat side. That smooth side goes down onto the bed, and the thicknesser (planer) cuts slices off the top (unsmoothed) side. In other words, you put a board into the planer to make it thinner after you have already established one flat side using the jointer (or a hand plane.) At the same time, the planer will also make the rough side both smooth, and parallel to the other side.

"Which do you want? That depends on your hand tool skills and your level of energy. If you are skilled enough to flatten boards first with a hand plane, you could make do with just a planer, which is what I do. Of course, if you are really good with a hand plane and very energetic, you can use it to eliminate both tools. Bear in mind that power tools simply do what an equivalent hand tool does, but they use a motor to make the job go faster and easier."

From the Woodworker's Journal eZine 2004 archives

Of course, we think it's best to own planer and a jointer, and keep a spare of each on hand "just in case."  If that's not in the budget, here's a chance to side-step a good chunk of the choice anxiety: Right now you can register to win a handsomely equipped Powermatic shop - with absolutely no obligation whatsoever - in Rockler's Powermatic tool giveaway. Rockler employees aren't eligible, so we here at Rockler can all honestly, sincerely, enthusiastically, and slightly enviously wish you the best of luck!

posted on October 6, 2006 by Rockler
previous post next post
Comments

2 thoughts on “A Planer, or a Jointer?”

  • I had the same question, and this article helped. A jointer is now at the top of my list of "wants".

  • Jpseph DePiazza Jr.
    Jpseph DePiazza Jr. March 30, 2007 at 3:02 pm

    Very good advice on a planer/ jointer. Personally I prefer the planer for my first choice. Joe

Leave a comment

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X