CNC Releases Shark Pro Plus HD for Small Shop Design
posted on December 1, 2011 by Woodworker's Journal
CNC Shark Pro Plus HD Routing System Previously out of reach for the average consumer, CNC introduced a small-shop sized router system in 2011 available through Rockler stores.

Released in November 2011, the CNC Shark Pro Plus HD is designed specifically for 1-1⁄2hp to 2-1⁄2hp routers commonly used in small shops, adding to their options for computer controlled machinery. Available exclusively through Rockler, the CNC Shark Pro Plus HD has a table measuring 28-1⁄2" x 36", useful for carvings and machinery operations on doors, cabinetry, signs and other projects. Steel and high-density polyethylene construction add durability, allowing it to withstand accidental impacts that could destroy an aluminum or MDF surface. Compatible with several different routers, the CNC Shark Pro Plus HD requires a PC computer with a USB port. The tool, made in the U.S.A., has a Z travel of up to 7 inches maximum (2 inches more than regular) and a maximum cutting capacity of 25 x 25 x 7 inches, with a Y axis expandable to 48 inches. It was priced at $3,999.99 as of 2011.

posted on December 1, 2011 by Woodworker's Journal
previous post next post
Comments

4 thoughts on “CNC Releases Shark Pro Plus HD for Small Shop Design”

  • mike

    Do you have a CNC router that is a little bigger than the shark pro pus I would like to find something with a table that would be at least 24X 48 or even just a little bigger.

    Thanks Mike

  • BENOIT tREMBLAY

    wHAT IS INCLUDED WITH THIS MACHINE?
    iNEED TO WOORK ON INSIDE PINE DOORS OF 30 INCHS WIDE?
    cAN I BUY DIRECTLY FROM YOU GUYS ?
    HOW MUCH ?

    tHAMKS
    Ben

  • Ronald Webb

    What are the power requirements for theShark pro plus hd?

  • Rockler Woodworking and Hardware
    Rockler Woodworking and Hardware October 10, 2014 at 4:34 am

    Ronald, Here are the power requirements for the Shark Pro Plus:
    Normal household current 110VAC-120VAC 2 cycle 60hz
    Computer requirements: PC
    2 GHz Pentium 4
    1Gb with Windows XP
    2Gb with Windows Vista & Windows 7
    60 Mb Disk space (Program)
    Display: 1024 x 768 Graphics display
    Operating System: Windows Vista, Windows 7 or Windows 8 with 2Gb RAM
    or Windows XP with 1Gb RAM
    A PDF reader program (such as Adobe PDF Reader) is required to read the documentation.

Leave a comment

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X