May Sales
A European Hinge for Lipped Doors
posted on by

Until recently, if you wanted to outfit the popular 1940s and 1950s "lipped" style of cabinet door with new hinges, your options were limited: You had a few styles of traditional pin-type overlay hinges to choose from. Now, thanks to the Salice Hinge and Plate for 3/8" Overlay Doors, you can take advantage of the features that make European style hinges the hinge of choice for just about all new kitchen cabinetry.

There are good reasons for the European style hinge's popularity. To start with, they're exceptionally durable and suited for a wide variety of applications. Most are self-closing, and many offer tool-free mounting and dismounting of the door once the hinge is installed. European style hinges are also completely concealed from view when the cabinet door is closed, meaning that you don't have to match the style of the hinge to the knobs and pulls you've picked out.

European hinges are exceptionally forgiving. The Salice hinge's three-way adjustability means you don't have to worry if the cabinets are a little out of square or the doors are a touch out of flat. With a turn of a screw you can compensate for small irregularities in the shape and size of the cabinets and doors, and in a matter of a few minutes align the edges of an entire bank of cabinet doors - an important consideration if you're planning to update a set of 60 year old cabinets.

European hinges are also one of the easiest to install of any type of hinge. There are no time-consuming mortising operations or the need for dead-on accuracy if the hinge and door to are going to end up in the right place. The adjustability feature and the fact that the hinges are hidden from view most of the time mean that you have a good deal more "wiggle room" than with many other types of hinge.

The installation will go even faster if you pick-up a Rockler JIG IT for Concealed Hinges. With the JIG IT, drilling the cup holes in exactly the right spot takes only a few seconds each. And for those of you who already own the jig: The JIG IT will work for the new Salice hinge without the need for any add-on parts or adapters: Instead of using the pre-set 3mm and 5mm tabs, flip the guide plate around and use the adjustable slots on the other side. Installing the Salice Hinge and Plate for 3/8" Overlay Doors is the same simple, foolproof procedure as with any other type of cabinet door you've come across.

posted on August 15, 2013 by Rockler
previous post next post

3 thoughts on “A European Hinge for Lipped Doors”

Leave a comment