- Spray Gun w/Sprayer Station. Sprayer station plugs in and produces air flow to the spray gun via a turbine.
- Sprayer Cup that attaches to spray gun; Replacement cups are sold separately.
- 0.9mm and 1.8mm tip and needle sets; Typically the 0.9mm tip works better with latex paints and the 1.8mm tip is better for oil-based paints.
- 15' hose for maximum flexibility and convenience
- Viscosity cup for accurate thinning
- Operating and cleaning instructions; Instructions include information on how to thin material and more!
- Small amounts of solvent such as mineral spirits may be used to clean the gun after use; Recommend using 3 and 1 oil after cleaning.
- Maximum Air Flow Pressure: 4 psi
- Power Consumption: 1000W
- NOTE: At this time there is no adapter for the EZ-Clean System™ - 3M™ PPS
|Manufacturer Part Number||A01-013-0016|
|Cup Capacity||28 oz|
|Pressure Range||4 psi|
173 Review(s)View All
Very good value + Excellent performancePosted December 28, 2014
As several comments said, the instructions are too minimal - they expect that the user is already familiar with spraying. Everything's there, it's just not put into an understandable narrative, including why certain things are important.
I'm impressedPosted December 16, 2014
Very SatisfiedPosted December 14, 2014
Editor's note: Replacement parts for this sprayer are available through our customer service at 800-376-7856.