Incra Miter 1000HD Miter Gauge  Zoom

Incra Miter 1000HD Miter Gauge

Item #: 25464
Each In Stock
Achieve absolute precision at any angle!


This high-definition gauge has 180 positive stops for pin-point accuracy at every degree (with special stops at +/-22.5°), plus a micro-adjustable vernier scale for fine-tuning to 1/10°. Add to that the industry's smoothest adjustable miter bar, a telescoping fence, a premium dual-arm flip stop, and superior duplicating ability, and you've got a can't-miss solution for better results. Perfect for both table saw and router table applications, the Miter 1000HD allows you to produce perfect, gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups.

  • Heavy duty machined and laser cut components
  • GlideLOCK miter bar features adjustable expansion disks that eliminate slop and ensure smooth operation.
  • Telescoping IncraLOCK fence expands from 18" to 31" and features a T-slot for adding a zero clearance sub-fence.
  • Flip Shop Stop has patented saw tooth rack system that controls the length of your cut.
  • Dual flip arms operate independently or in tandem for multiple setups.
  • All parts are precision machined for unrivaled durability and day-to-day repeatability.
  • Miter bar will fit square-sided miter slots measuring 3/4" wide and 3/8" deep, with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765".

Tech Spec

Brand Incra
Manufacturer Part Number INCRA MITER 1000HD
Weight (lbs) 7.6000

What's included:

(1) Incra 1000HD Miter Gauge


Customer Reviews

23 Review(s)

View All

Must have tool!

Michael Posted January 11, 2014
Don't believe all the negative reviews here. This is a fine piece of equipment, and as far as I am concerned, a must have tool. It is not flimsy or made out of cheap stamped steel as some reviews have indicated. I measured, and the teeth on the protractor head (for angle adjustments) are over 1/16" thick steel. The instructions are clear and easy to follow on how to get the gauge in perfect alignment with your blade and 90 degrees to the table top. The flip stop and is easy to operate and accurately machined. As one review pointed out, the tape measure on the top of the fence does move, but it is supposed to. This allows you to set the measurement accurately for each cut due to the aluminum fence needing to be moved to avoid it hitting the blade on some angle cuts. It is all clear in the instructions, and as with any precision tool, it's best you just bite the bullet and read them!

Some other things worth pointing out, there is a handy scale printed on the top of the gauge which tells you exactly what angle to cut at to make something a certain number of sides. Say your making a segmented bowl blank, and need to know what angle to cut for 15 sides. Just look at the gauge, and it will tell you to make 12 degree cuts to achieve this. Couldn't be easier. Also, the method for adjusting the miter bar in the table slot is extremely easy and can be done without removing it from the table. The whole process of getting a no slop fit took me about 2 minutes.

I rely heavily on the reviews on this and other websites. I don't want to sink a lot of money into something that doesn't work. I was disappointed in some of the reviews here, and after getting the Incra 1000HD, I thought I needed to clarify some of the alleged issues that people are having. I don't want anyone else to be turned off this tool due to bad information!

This is an expensive tool. The bottom line is, if you struggle with the junk miter gauge that likely came with your saw, this will make your life so much easier. The accuracy is unbeatable.

1000HD Incra

SirSir Posted December 26, 2013
I've been putting off replacing my factory table saw fence. With radial & miter saws, I didn't really see a need. I saw this on sale and said it's about time. Great price/ free shipping, thanks Rockler Clause. Set up was super simple, fits tight on Jet table saw, zero play on table and in fence system. Minor fine adjustments were needed to zero it in, perfect, I am fussy. Adjustments and use are easy and simple. This fence can do it all with repeatable percision. I do agree with other reviews, this unit can be fragil and like all percision tools, measuring tools, needs to be treated with respect. Custom kitchen cabinets are in the planning stage, this will be an asset. I highly recommend this fence.

Just got this in the mail...

Joseph P from Ansonia, CT Posted January 5, 2013
Just got this in the mail yesterday. I bought it with gift cards from Christmas and got it on sale for a very low price. I spent a good amount of time setting it up according to the very well written instructions and making several test cuts. Everything was dead on accurate. This is my first experience with Incra products, but if the fit, finish, and attention to detail is indicative of all of their products it definitely won't be my last. The only problem I could find with this miter gauge is it is too good for my tablesaw. Now I'm gonna need to buy a new one. This gauge would've been a great purchase at it's regular price, but at the sale price Rockler had it for it's a steal and worth every penny. I highly recommend it.

Write Your Own Review

Only registered users can write reviews. Please, log in or register


  • Incra 1000HD Miter Gauge Review: NewWoodworker

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X