Overview
This high-definition gauge has 180 positive stops for pin-point accuracy at every degree (with special stops at +/-22.5°), plus a micro-adjustable vernier scale for fine-tuning to 1/10°. Add to that the industry's smoothest adjustable miter bar, a telescoping fence, a premium dual-arm flip stop, and superior duplicating ability, and you've got a can't-miss solution for better results. Perfect for both table saw and router table applications, the Miter 1000HD allows you to produce perfect, gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups.
Features:
- Heavy duty machined and laser cut components
- GlideLOCK miter bar features adjustable expansion disks that eliminate slop and ensure smooth operation
- Flip Shop Stop has patented saw tooth rack system that controls the length of your cut
- Dual flip arms operate independently or in tandem for multiple setups
- All parts are precision machined for unrivaled durability and day-to-day repeatability
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 11 questions
Browse 11 questions
and 78 answers
Why did you choose this?
Rockler Store
Great price for a great product.
James C
on Sep 28, 2016
I bought this for the accuracy in making miter cuts of various angles for pieces used for segmented bowls. It works very well with easy setup and great accuracy.
Stuart S
on Sep 24, 2016
Great price for a great product.
James C
on Sep 28, 2016
My old Delta miter gauge is fine tuned for 90° & 45° cuts but not for various angles.
Rich J
on Sep 25, 2016
what is the difference between the 1000HD and the 1000SE?
BEST ANSWER: The 1000SE has stops every 5 degrees while the 1000HD has stops every degree.
- Reply
- Inaccurate
- Brian C on Aug 23, 2016
- Purchased on Aug 1, 2016
Is this mitre gauge available in metric?
Does this have to be used on the left side?
BEST ANSWER: no, it can be adjusted to the right side. It isn"t a quick change, so you should set it to the side you use most
- Reply
- Inaccurate
- Comfort H on Apr 7, 2015
- Purchased on Mar 26, 2015
Will this fit a Porter-Cable saw?
BEST ANSWER: Should fit it just fine. I was looking at the Porter-Cable saws and I noticed they have the standard ¾" slot. This mitre gauge works great on my Craftsman Saw. You or the person you are buying this mitre gauge for will love it. Gary
- Reply
- Inaccurate
- gstox on Jul 18, 2016
- Purchased on Apr 5, 2015
How many expansion guide are there? In the photo it looks like there is only one at the end?
BEST ANSWER: That is correct. The three small black screws are to adjust the length. Please keep in mind that this guide is heavy on the left side. If you saw is short on the left you must be careful sliding it. Also the main fence can be moved along its' entire length if you choose to use it in the right hand slot.
Good luck. I love its' accuracy.
Good luck. I love its' accuracy.
- Reply(2)
- Inaccurate
- Arthur L on Aug 17, 2015
- Purchased on Apr 5, 2015
Will it fit in my craftsman saw with safety tabs throughout the miter slot?
BEST ANSWER: There seem to be adjustments for any standard miter track. If you have an older Craftsman saw with a non standard track I'm not sure. My saw a Ridgid 4510 portable has miter slots with a safety groove that was no problem.
- Reply
- Inaccurate
- Arthur L on Jul 15, 2015
- Purchased on Apr 5, 2015
Will this work on a Bosch table saw?
BEST ANSWER: If the Bosch table saw has a standard sized miter slot, yes. Some saws, apparently Craftsman and Shopsmith do not. The slots are marginally different. If it is not, they make other bars that do fit. My experience is with the Shopsmith, and they do make one for it. You can find out for sure by emailing Incra. They are excellent in customer relations.
- Reply
- Inaccurate
- David K on Jul 17, 2015
- Purchased on Apr 5, 2015
can this miter gauge replace the miter on a dewalt 7490 table saw?
BEST ANSWER: The guide bar on this unit is adjustable so you can get a good fit. I can be made to work if your saw has a t-slot to keep the bar from coming out of the slot.
- Reply
- Inaccurate
- Dale M on Aug 8, 2016
- Purchased on Apr 4, 2015
Does Incra 1000HD miter fit Makita MLT100 table saw miter slots?
BEST ANSWER: It fits my standard 3/4" miter slot on my Craftsman table saw. Works great, was using it this morning.
- Reply(1)
- Inaccurate
- gstox on Oct 9, 2015
- Purchased on Apr 5, 2015
what is sku number?
Reviews
4.6 / 5.0
110 Reviews
Must have tool!
Don't believe all the negative reviews here. This is a fine piece of equipment, and as far as I am concerned, a must have tool. It is not flimsy or made out of cheap stamped steel as some reviews have indicated. I measured, and the teeth on the protractor head (for angle adjustments) are over 1/16" thick steel. The instructions are clear and easy to follow on how to get the gauge in perfect alignment with your blade and 90 degrees to the table top. The flip stop and is easy to operate and accurately machined. As one review pointed out, the tape measure on the top of the fence does move, but it is supposed to. This allows you to set the measurement accurately for each cut due to the aluminum fence needing to be moved to avoid it hitting the blade on some angle cuts. It is all clear in the instructions, and as with any precision tool, it's best you just bite the bullet and read them! Some other things worth pointing out, there is a handy scale printed on the top of the gauge which tells you exactly what angle to cut at to make something a certain number of sides. Say your making a segmented bowl blank, and need to know what angle to cut for 15 sides. Just look at the gauge, and it will tell you to make 12 degree cuts to achieve this. Couldn't be easier. Also, the method for adjusting the miter bar in the table slot is extremely easy and can be done without removing it from the table. The whole process of getting a no slop fit took me about 2 minutes. I rely heavily on the reviews on this and other websites. I don't want to sink a lot of money into something that doesn't work. I was disappointed in some of the reviews here, and after getting the Incra 1000HD, I thought I needed to clarify some of the alleged issues that people are having. I don't want anyone else to be turned off this tool due to bad information! This is an expensive tool. The bottom line is, if you struggle with the junk miter gauge that likely came with your saw, this will make your life so much easier. The accuracy is unbeatable.
- Was this review helpful? Yes (19) No (0)
- Flag as Inappropriate
January 11, 2014
- Was this review helpful? Yes (19) No (0)
- Flag as Inappropriate
Lots of great features. After doing...
Lots of great features. After doing the steps for setup in the intructions though I found that the fence was not square to the table of my saw. The angle piece that holds it to the bar was out of square quite a bit. The intructions said to use strips of paper to shim it square. I had some .001 shim stock and after much trial and error I got it close. I emailed INCRA about it and after many weeks got a response. They said this only matters when you hold a workpiece tight to the fence instead of putting pressure down to the table. I build a lot of picture frames with narrow pieces that should be held tight to the fence. I am pleased with the miter gauge but think that a high end tool should have been square out of the box.
- Was this review helpful? Yes (7) No (0)
- Flag as Inappropriate
August 25, 2012
- Was this review helpful? Yes (7) No (0)
- Flag as Inappropriate
1000HD Incra
I've been putting off replacing my factory table saw fence. With radial & miter saws, I didn't really see a need. I saw this on sale and said it's about time. Great price/ free shipping, thanks Rockler Clause. Set up was super simple, fits tight on Jet table saw, zero play on table and in fence system. Minor fine adjustments were needed to zero it in, perfect, I am fussy. Adjustments and use are easy and simple. This fence can do it all with repeatable percision. I do agree with other reviews, this unit can be fragil and like all percision tools, measuring tools, needs to be treated with respect. Custom kitchen cabinets are in the planning stage, this will be an asset. I highly recommend this fence.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
December 26, 2013
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
A must have for tablesaw work
I don't want to repeat what has already been said but this is a very well made precision miter gauge. Set up out of the box is very easy and painless. You really cant ask for more with exact stops for each degree, ability to extend the fence and even add a backer board. The Incra slide fit system is excellent and you can achieve a positive no play fit in the table saw groove. I am very pleased with this purchase and would recommend this product. I give it four stars not five simply because of the price. At full normal price it is just to expensive for what you get. Wait for it to go on sale and then I feel its a fair purchase.
- Was this review helpful? Yes (5) No (1)
- Flag as Inappropriate
October 14, 2014
- Was this review helpful? Yes (5) No (1)
- Flag as Inappropriate
Love it!
I had a bit of a challenge setting it up because the miter slot on my Bosch table saw was a bit larger than the directions said it allowed for, but after some fine tuning, I got it set properly and it is a dream! It works very well and coming from a stock gauge, its terrific. I still have yet to try the .1 increment adjustments, but I love it thus far!
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Recently purchased 1000HD miter guage
Excellent all around performance with user friendly adjustments to precise cut specifications. I have put the Incra to some rather demanding use and am completely satisfied with my purchase.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Works as advertised
I am happy with my Incra Miter 1000HD,.. angles and postitioner are accurate, repeatable, and hold in position well. Cutting 15 degree segments for segmented bowl (banjo rim) turning worked well. (I wish it had a hard 11.25 degree notch for 16 segments.) I wonder if the necessarily delicate angle notches and selector may wear with use, but only time will tell. Moving the fence requires an allen wrench (included), but as long as the tool is handy, no problem. As with any larger fence miter gauge, remember to check/move the fence when you change angles on the gauge and bevels on the saw blade, or change miter slots-- to avoid shortening your fence or tripping your SawStop cartridge, don't ask how I know.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
1000HD Incra
I have a 40 year old Delta table saw and this was the perfect fit. Set up was a breeze. Works great. Extendable fence and stop works great. Cut 45s for a end table top last weekend, came out perfect.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
my favorite
wow what a great tool I have recommended this tool to every one in our club, and many of our members have them. It's Versatility and accuracy are unlimited
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Goodish. Not worth the price.
I bought this and put it together and loved it. But after using a few times the expansion discs that make it fit your T-slot wear out. I was suprised how fast mine wore out. Of course you don't realize they are worn out til after you make cut a frame for something and of course they don't line up perfectly cause you had play in the slot cause the expansion disc wore out so quickly. You have to take the whole handle and other components off to replace the last expansion disc.
Everything else is pretty solid on it. It would be awesome if it had different options of miter gage bar sizes instead of sending expansion discs that wear out so quickly.
Everything else is pretty solid on it. It would be awesome if it had different options of miter gage bar sizes instead of sending expansion discs that wear out so quickly.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
