Inlace Acrylester ''Molten Metal'' Handle Blank  Zoom

Inlace Acrylester ''Molten Metal'' Handle Blank

Item #: 41490
$15.79
Each In Stock

Overview

The generous dimensions of these shimmering irridescent blanks make them ideal for our Ice Cream Scoop Hardware Kits (#34360, sold separately), and our Pizza Cutter Blade Kits (#34913, sold separately). They also make great tool handles and turning stock for other projects wider than a pen blank. Approximately 1-1/2" x 1-1/2" x 6".

Tech Spec

Manufacturer Part Number WBIA24
Weight (lbs) 0.7100
Length 6"
Width 1-1/2"
Thickness 1-1/2"
Blank Type Inlace Acrylester

Reviews

Customer Reviews

1 Review(s)

View All

Some tips

Jason Posted December 19, 2013
I used the "Inferno" blank, but thought that this may be helpful:
I found that the 2 main keys to successful turning of these blanks are 1) after rounding, increase speed (I used 2430 RPM) and 2) use sharp tools. Slower speeds and dull tools produce chips. Other tips: use a live center (like Rockler's 43472). My lathe had a "dead" center, which I started to use, then quickly realized that it was melting the acrylester...duh. I switched to a live center which worked great. Don't be aggressive. Be gentle. Trying to cut too fast will result in chipping. When sanding, try not to create too much heat. I found that if I wasn't constantly moving the sandpaper around, it created too much heat and caused tiny cracks in the surface of the acrylester. I used a DAMP Scotchbrite-type abrasive pad (equivalent to #00 steel wool) for the last step before polishing, which worked really well. I made a pizza cutter handle (for Rockler's 34913) and thanks to a tip I found somewhere, I placed the insert on the allen wrench and heated it up with a propane torch. Not SUPER hot, but hot, then quickly screwed it in (I drilled a 1/2" hole). This worked beautifully. Otherwise, I fear that it would have cracked the handle. The end result was a beautiful, smooth, shiny handle. I didn't have to fill anything with CA glue like some of the other reviews I've read about acrylester. Good luck!

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X