Arthur -- Richmond, VA
INSTEON SwitchLinc Relay (Non-dimming) The Most Advanced Remote-Controllable On/Off Switch
Fill your entire home with personalized mood lighting for any occasion. The Non-Dimming INSTEON SwitchLinc Relay allows you to include fluorescent or non-dimmable lights, fans, and other appliances in your INSTEON network. The SwitchLinc Relay is made to run silently no matter what kind of device you connect to it. The SwitchLinc Relay functions only as an on/off switch. If you need a dimmable switch to control incandescent bulbs, low-voltage halogen (e.g. track), and other low-voltage lights with magnetic or dimmable electronic transformers, use either the INSTEON SwitchLinc Dimmer or the High-Wattage INSTEON SwitchLinc Dimmer. Ideal for places like closets, laundry rooms, and garages, an INSTEON SwitchLinc Relay Countdown Timer is also available.
How many times have you jumped into bed and forgotten to turn the lights off? With the SwitchLinc Relay's remote control ability, you can have the convenience of adding a bedside controller to turn off your lights after you get into bed. Never come home to a dark house again: Install Smarthome Manager Essential's Timer Software on your computer to schedule any SwitchLinc Relay or any other INSTEON-compatible device to turn on or off at any specific time or even at sunrise and sunset. The SwitchLinc Relay can control a 480-watt incandescent load or 13A resistive load.
- Controls any load type, such as fluorescent lights, fans, and motors!
- Create elegant whole-house lighting scenes in minutes
- Quiet - 80% quieter than traditional relay switches
- A great low-cost investment for any home
- Award-winning INSTEON technology: the ultimate in simplicity and reliability
- Manufacturer: Smarthome
New! Etched Labeling Now Available
- White customized etched paddle
- Click here to see all etching options
Neutral wiring is required. Do I have neutrals?
Easy To Install
The Non-Dimming INSTEON SwitchLinc Relay is so easy to install and set up and yet so affordable, you'll want to replace all your switches with SwitchLinc switches. Just remove the old switch, reattach the existing line, load, ground, and neutral wires using the included wire nuts, and you're done. If this is your first INSTEON installation, the best way to ensure you get everything needed to provide the most reliable communication among devices is to buy the complete INSTEON Wire-in Dimmer Scene Lighting Starter Kit, which includes everything required to set up your INSTEON network, including two SwitchLinc Dimmers, a pair of INSTEON SignaLinc RF Signal Extender to ensure INSTEON network reliability, and the desktop ControLinc. Learn more about INSTEON here.
Beautiful, High-Quality Construction
Unlike other switches, the Non-Dimming INSTEON SwitchLinc Relay offers the natural feel of high-end dimmers. You'll love the crisp, tactile response with each touch instead of the mushy feeling of other brands. An elegant brightness bar of 8 white LEDs indicates the current on/off status of the lights being controlled. To match your room's dècor, an LED color change-out kit is available with four colors: red, blue, amber, and green. Green, blue, frosted white, red, and amber LED light pipes are also available in 8-pair packs. The SwitchLinc Relay is designed and manufactured to high-end specifications and goes through over 10 quality control tests before arriving at your doorstep. This modern Decora-style switch will blend with any room's design. White paddles are included with each SwitchLinc Relay, but additional paddle colors are available and sold separately. Choose the color that best suits your room's decor: Almond, Black, Ivory, or Grey. Two paddles are included in each color-change set. The SwitchLinc Relay is also available with Almond or Ivory paddles pre-installed. Don't forget to order a matching wall plate.
Built with a Quieter Relay
Because the SwitchLinc Relay is built with a much quieter relay than most remote-control ON/OFF switches, it has a click that's more than 80 percent quieter than traditional relay switches. This allows you to control lights and other non-dimmable devices remotely without waking up the baby, annoying other family members, or sending your cat fleeing across the room. The click of the SwitchLinc's internal relay is barely audible.
Generates Less Heat
Unlike triac-based switches, SwitchLinc Relay uses a hard-contact relay to control the load. Other switches use a semiconductor that absorbs about two volts of power and dissipates the heat through the front of the switch. By using a relay, the switch runs cooler and full voltage gets to the load.
Create Multi-Way Circuits
The SwitchLinc Relay allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way circuit. First replace all of the existing switches you want to include in the circuit with SwitchLinc Relays. The main relay must be connected to the standard wires: load, line, neutral, and ground. The secondary relays only need to be connected to line, neutral, and ground. No traveler wires are needed, so it is easy to place one of the relays wherever you need it. Cross-linking all of the companion relays to the master relay is the last step in the process. The end result is a flexible, fully functional multi-way circuit.
Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the SwitchLinc Relay can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. The relays can blend seamlessly in a scene with SwitchLinc Dimmers. So one set of lights connected to a SwitchLinc Dimmer can slowly dim, while another set connected to the SwitchLinc Relay turns off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, upgrade to the INSTEON KeypadLinc Dimmer.
The Non-Dimming INSTEON SwitchLinc Relay is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that it can respond to X10 commands from an X10 controller and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.
Similar relays are up to 50 percent deeper than the SwitchLinc Relay. Thanks to its slim design, it makes installation easy even in small junction boxes.
All SwitchLinc Relay settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the SwitchLinc Relay will return to its last on/off state when power is restored.
Certifications and Warranty
All SwitchLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty.
- INSTEON SwitchLinc V2 Relay
- Quick Start Guide
- 2 mounting screws
- 3 wire nuts
- White paddle included
|Manufacturer Part Number||2476S|