INSTEON ToggleLinc Relay (Non-Dimming) The Most Advanced Remote-Controllable On/Off SwitchFill your entire home with personalized mood lighting for any occasion. The INSTEON ToggleLinc Relay (Non-Dimming) allows you to include fluorescent or non-dimmable lights, fans, and other appliances in your INSTEON network. The ToggleLinc Relay is made to run silently no matter what kind of device you connect to it. The ToggleLinc Relay functions only as an on/off switch. If you need a dimmable switch to control incandescent bulbs, low-voltage halogen (e.g. track), and other low-voltage lights with magnetic or dimmable electronic transformers, use either the INSTEON ToggleLinc Dimmer, White or INSTEON ToggleLinc Dimmer, Ivory. An INSTEON ToggleLinc Relay (Non-Dimming), Ivory is also available.
How many times have you jumped into bed and forgotten to turn the lights off? With the INSTEON ToggleLinc Relay's remote control ability, you can have the convenience of adding a bedside controller to turn off your lights after you get into bed. Never come home to a dark house again: Install INSTEON HouseLinc Desktop Software on your computer to schedule any ToggleLinc Relay or any other INSTEON-compatible device to turn on or off at any specific time or even at sunrise and sunset. A pair of INSTEON SignaLinc RF Signal Extenders should be installed to ensure INSTEON network reliability. The ToggleLinc Relay can control a 480-watt incandescent load or 13A resistive load.
- Controls lights and appliances remotely, turning them on and off
- Controls fluorescent lights, electronic ballasts, halogen lamps and low-voltage lighting transformers
- Incorporates a light or appliance into multiple lighting design scenes in minutes
- Same great features as the award-winning INSTEON SwitchLinc but with a familiar toggle control to match your home's decor
- Easy-to-install switch uses INSTEON (patent pending) technology for superior performance and reliability
- Manufacturer: Smarthome
Easy To InstallThe INSTEON ToggleLinc Relay is so easy to install and set up and yet so affordable, you'll want to replace all your switches with ToggleLincs. Just remove the old switch, reattach the existing line, load, ground, and neutral wires using the included wire nuts, and you're done. Learn more about INSTEON here.
Beautiful, High-Quality ConstructionUnlike other switches, the INSTEON ToggleLinc Relay offers the natural feel of high-end dimmers. The ToggleLinc is designed and manufactured to high-end specifications and goes through over 10 quality-control tests before arriving at your doorstep. The white status LED indicates the current status of the device being controlled. When the ToggleLinc Relay is turned off, the white LED illuminates to help with finding the switch in the dark. Don't forget to order a matching wall plate.
Built with a Quieter RelayBecause the ToggleLinc Relay is built with a much quieter relay than most remote-control ON/OFF switches, it has a click that's more than 80 percent quieter than traditional relay switches. This allows you to control lights and other non-dimmable devices remotely without waking up the baby, annoying other family members, or sending your cat fleeing across the room. The click of the ToggleLinc's internal relay is barely audible.
Generates Less HeatUnlike triac-based dimmers, INSTEON ToggleLinc Relay uses a hard-contact relay to control the load. Other switches may use a semiconductor that absorbs about two volts of power and dissipates the heat through the front of the switch. By using a relay, the switch runs cooler and full voltage gets to the load.
Create Multi-Way CircuitsThe ToggleLinc Relay allows you to customize your lighting setup no matter how your house is wired, even if the original switches were never wired for multi-way control. It's simple to create a 3-, 4-, or 5-way circuit. First replace all of the existing switches you want to include in the circuit with ToggleLinc Relays. The main relay must be connected to the standard wires: load, line, neutral, and ground. The secondary relays only need to be connected to line, neutral, and ground. No traveler wires are needed, so it is easy to place one of the relays wherever you need it. Cross-linking all of the companion relays to the master relay is the last step in the process. The end result is a flexible, fully functional multi-way circuit.
Scene LightingScenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the ToggleLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. The relays can blend seamlessly in a scene with ToggleLinc Dimmers. So one set of lights connected to an INSTEON ToggleLinc Dimmer can slowly dim, while another set connected to the ToggleLinc Relay turns off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, upgrade to the INSTEON KeypadLinc Dimmer.
CompatibilityThe INSTEON ToggleLinc Relay is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that it can respond to X10 commands from an X10 controller and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.
Non-Volatile MemoryAll ToggleLinc settings are stored in non-volatile memory and are not lost during power failures.
Network ReliabilityTo ensure network reliability 2 INSTEON SignaLinc RF Signal Extenders are required in each home with INSTEON-compatible products. While a single SignaLinc RF will bridge INSTEON signals between radio frequency and powerline signals, two properly installed SignaLinc RFs will also act as powerline signal repeaters, maximizing the reliability of your INSTEON network.
Certifications and WarrantyAll INSTEON ToggleLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, Smarthome stands behind the entire INSTEON ToggleLinc line of products with a full 2-year warranty.
- ToggleLinc V2 Relay White
- Quick-Start Guide
- 2 mounting screws
- 3 wire nuts
|Manufacturer Part Number||2466SW|