Overview
Simply hang it from the ceiling and turn it on, and it will clear the room of those fine dust particles. This unit was the first with remote control, timer and three speeds – now standard in the industry.
Features:
- Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
- Inner Pocket Filter is removable for easy cleaning
- Easy Grip Handles allow easy portability of unit
- Four Eye Bolts (with AFS-1000B only) let you hang unit from shop ceiling
- Remote Control has built-in timer with 2, 4 and 8-hour settings; automatically shuts system off at the end of the time setting
- Fully-Enclosed Ball Bearing Motor with Overload Protection for long, dependable service
- Rubber Feet prevent marring of surface when placed on workbench
- Features a handy remote control that can be used to adjust the three speeds, timer and on/off
- Quietly cleans and filters the air in your shop while you work. Filtering 98% of all particles 5 microns in size and 85% of all particles 1 micron in size. Use in conjunction with a JET dust collector for maximum dust control
- Unit comes complete with eyebolts to either hang the machine from the ceiling or to sit on on a workbench
- System features a convenient built in timer that can be set at 2, 4 or 8 hour increments. Turn the timer on when you enter the shop and forget about it. System will shut itself off at the hour interval you set
- Constructed of a heavy-duty, powder coated metal box and powerful motor and fan for added durability
- AFS-1000B Comes standard with an electrostatic filter that is electronically charged to attract many more dust particles than other standard filters
- Has the capability of filtering the air in a 20' x 20' x 8' shop in under five minutes. It can filter the air in that shop over 12 times an hour
- Two easy grip handles are inset into both sides for ease of movement
- Filters are easily replaceable, no tools required.
- The sealed inner three pocket filter fits inside and can be blown out or washed out if preferred
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 22 questions
Browse 22 questions
and 101 answers
How to clean inner filter 708733?
BEST ANSWER: Bruce H. I taught wood shop and had 4 of these appropriately spaced. They worked great. BUT my biggest problem was keeping the inner filter clean.
- Reply
- Inaccurate
- Bruce H on Nov 22, 2015
what is the maximum square footage this one will handle and should it be in the center of the room ?
BEST ANSWER: My first shop was 30 x 40' and it worked very well. Now I use it in a standard 2 car garage primarily to keep dust down and not have things covered in dust after I saw/turn/etc. If you have questions Jet will be very helpful! I can't post the phone number but just Google it for the number. You will get lots of help. As far as mounting they suggested that I put it off center- not in the middle of the shop or garage. Hope this helps!
- Reply
- Inaccurate
- William M on Dec 16, 2016
- Purchased on Nov 25, 2016
I work in a 60x40 barn with a 12 foot ceiling. However, I mainly only use the back 20x20 area for wood working. Would this filter be enough for that back area?
BEST ANSWER: II think it would. my woodworking room is 12 by 24 with 9 foot ceiling. it clears the room out in about 5 minutes from a very dusty condition. it was easy to install I hung it from the ceiling. I haven't had it too long but I'm well satisfied with it so far
- Reply
- Inaccurate
- DON K on May 4, 2015
- Purchased on Apr 3, 2015
My shop is 30 x 40 with a 16' pitched ceiling, have 2 ceiling fans mounted at top of pitch , will this unit be big enough?
BEST ANSWER: My shop is 30 x 30 with 10 foot high ceiling. I have placed the unit over my main work area and hung it so it is 7'6" from the floor and 4 feet from the side wall. It is also 12 ' from the end walls.. It seems to work well. I have notice a definite reduction of dust in the room..
- Reply
- Inaccurate
- Tim R on Mar 5, 2017
- Purchased on Feb 11, 2017
Does this unit plug into an outlet, or does it need to be hard wired by an electrician?
BEST ANSWER: You can just plug it into a 110V receptacle
- Reply
- Inaccurate
- PETER R on Jun 10, 2015
- Purchased on Apr 3, 2015
How long is the electrical cord ?
BEST ANSWER: About 6'maybe 6'-6" haven't measured as the filter is mounted in the center of my garage close to the outlet for the garage door opener. Filter works great!
- Reply
- Inaccurate
- Big Ted on Dec 2, 2015
- Purchased on Mar 3, 2015
Do you have to hang from ceiling or can you sit on top of shelf unit?
BEST ANSWER: I have it hanging, but the intake and exhaust are on the front and back, so where the bottom is should not matter.
- Reply
- Inaccurate
- Philip H on Nov 14, 2016
- Purchased on Apr 2, 2015
Would this unit work for a metal fab shop? Primarily for the gas fumes from welding and some metal powder from grinding and cutting?
BEST ANSWER: the directions that come with the unit specifically state, "for wood dust only". It works great for wood, in fact it on right now in my shop cleaning out walnut that i have been turning/sanding.
- Reply
- Inaccurate
- Steve L on Jan 16, 2016
- Purchased on Apr 3, 2015
Can this be incorporated into the sleeper berth of a commercial vehicle?
I'm looking for a solution to reduce silica dust in my truck.
I'm looking for a solution to reduce silica dust in my truck.
BEST ANSWER: Don't know about that. It's 110 volt so you have to figure out how to get power to it. And some place to my it sold.
- Reply
- Inaccurate
- DON K on Apr 1, 2017
- Purchased on Apr 3, 2015
Can anyone confirm for me if the 2/4/8 hour timer settings can be selected from the panel's power on/off button? I can adjust the timer settings with the remote but it seems odd that the speed can be changed from panel buttons but then you have to go get the remote to set the timer. I'm wondering if mine has failed somehow.
BEST ANSWER: Mine also works the way you described. My unit is mounted on a high ceiling so I have always used the remote. Consequently, I never noticed this oddity.
- Reply
- Inaccurate
- Richard H on Feb 24, 2017
- Purchased on Mar 9, 2015
Can u leave it running all the time?
BEST ANSWER: I suppose that you can, not sure why that would be necessary. I have mine running while I am in my shop which at times is 8 hours or so. I usually set the timer to run for a period of time after I leave the shop!
- Reply
- Inaccurate
- Big Ted on Jan 27, 2016
- Purchased on Mar 3, 2015
How long is the electric cord?
BEST ANSWER: think it's about 8 ft, I'm not at home right now so can't measure it.
- Reply
- Inaccurate
- DON K on Sep 11, 2016
- Purchased on Apr 3, 2015
I need a filtration system that will clean the air for a stone work studio. Will this be adiquite?
BEST ANSWER: I believe that it will. I have it in a room that is 12 by 24 and it cleans it up in no time.
- Reply
- Inaccurate
- DON K on Apr 4, 2016
- Purchased on Apr 3, 2015
How much electrical current does it take?
BEST ANSWER: Looks like 4.5 amps when running. Slightly higher on startup from inrush. I have it on a 20 amp breaker with a lot of other stuff. Works fine
- Reply
- Inaccurate
- Bruce M on Feb 8, 2016
- Purchased on Mar 19, 2015
how loud is this unit, compared to?
BEST ANSWER: Low speed is very quiet and I generally run it while doing hand tool work. On high it's louder but I'm usually running a sander so the noise isn't that notable from the air filter. I love my unit and use it in a 20 x 20 garage.
- Reply
- Inaccurate
- DOUG P on Dec 31, 2016
- Purchased on Sep 3, 2016
Can this unit be mounted on a wall rather than the ceiling (I have a rather high ceiling and it would be difficult for me access)?
BEST ANSWER: Don't know about a wall but I also have a high ceiling in my basement shop (9ft+). I installed hooks in the ceiling joists, placed the Jet system on saw horses, ran chains from the hooks to the Jet system. Then, with a helper supporting the system from below, I mounted a ladder and pulled the unit up by the chains ( a little at each corner at a time) until it was suspended at the height I wanted. I had some excess chain which I removed with a bolt cutter. So far so good
Hope this helps.
Hope this helps.
- Reply(1)
- Inaccurate
- William H on Aug 24, 2015
- Purchased on Apr 4, 2015
Would this filtration system work in my garage with four dog kennels set up for four dogs max? I have Mitsubiti mini split air condition system. I have a dehumidafier running at 40%. Would your system work to get rid of dog dander etc and circulate the air?
BEST ANSWER: It should work fine. I agree with Carol D. You should add a filter to pre-filter and save on the cost of replacing the Jet filter. You may also need to add some sort of pre-filter to your mini split to keep the fine dander and dust from infiltrating the standard filter.
- Reply
- Inaccurate
- Troy K on Feb 9, 2016
- Purchased on Nov 27, 2015
Will the unit remove odors?
BEST ANSWER: It does well removing paint fume odors. I don't know about other odors.
- Reply
- Inaccurate
- J D on Jul 18, 2015
- Purchased on Apr 3, 2015
Is there a Hepa certified filter for this unit?
BEST ANSWER: Not that I am aware of. I go to Lowe's and buy 2 furnace filters that I tape over the air intake of my unit. It takes out all of the big chunks before it hits the regular filters. I then vacuum these filters with my shop vac after each day's use. I love it, especially with the shut off timers and variable speeds.
- Reply
- Inaccurate
- S H on Feb 10, 2017
- Purchased on Mar 7, 2015
does it remove smoke from cigarettes?
BEST ANSWER: Don't smoke, but I'm sure it would.
- Reply
- Inaccurate
- Mark B on Feb 20, 2017
- Purchased on Nov 25, 2016
is there a HEPA filter available for this unit?
Reviews
4.7 / 5.0
116 Reviews
Jet 1000CFM Air Filtration System with Remote
I have been using the filter for about a month. It definitely removes a significant amount of small particles as evidenced by the amount of dust captured by the filter. The filter is ceiling mounted in my garage. This unit must weigh about 50 pounds which makes installation tricky for a one man install. My solution was to first install hooks in the ceiling, then sit the filter on a portable table, then attach chains long enough to reach the filter from the ceiling to each corner of the filter. Then S hooks can be used to attach the filter to the chain. The filter can then be lifted, one corner at a time, so that the S hook can be attached to a higher link on the chain using a ladder for the higher levels. The process took about 20 minutes for a 71 year old man to walk the unit up to the ceiling.
I am very pleased with installation and effectiveness of the filter.
I am very pleased with installation and effectiveness of the filter.
- Was this review helpful? Yes (13) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (13) No (0)
- Flag as Inappropriate
Few things have made a more...
Few things have made a more positive influence on my shop like this air filtration system. I have a mobile shop in my 24' x 24' x 10'h garage both cars go in every night, and the impact of this has been fabulous for 3 reasons1)A dramatic reduction in the dust that settles back in and around the shop, and most importantly that tracked into the house.2) Using this, some plastic "curtains" to block off a 15' x 15' area in the center of the shop I have effectively created a spray booth in my shop. As an example, I sprayed oil based polyurethane in my shop this weekend when it was 45 outside. I used a sacrificial cheap house filter over the outer filter to catch sticky overspray a problem with poly and the results were spectacular and nothing is sticky.3) The unit being located on the ceiling does a great job of keeping the air circulating making my "greenhouse style" heater work significantly better.Oh, and I have also found that there are several brands of sub $5.00 12" x 24" x 1" furnace filters that work very well as a replacement for or supplement to the outer filter. This makes the unit very cheap to operate.Buy one, you will be glad.
- Was this review helpful? Yes (14) No (2)
- Flag as Inappropriate
November 17, 2010
- Was this review helpful? Yes (14) No (2)
- Flag as Inappropriate
Excellent Value
Shop for a sale , it's well worth it, and you'll breathe easier.
If your spouse give you a hard time about spending money on dust collection systems, tell him or her that this will help make sure you'll be around a bit longer (assuming this is a persuasive argument in your family). At least this argument worked for me.
I suggest using this for secondary filtration. I agree with the pro's that the best way to capture dust is at the source, which is why I have a high powered, cyclonic dust system as my primary dust remover.
However, it's often difficult, if not impossible, to capture all the dust at the source, in which case, this ambient filter provides an efficient method for getting rid of what the cyclonic dust collector misses. Examples include the fine dust from large sanding projects and blowing sawdust off of tools using an air compressor.
I purchased the optional, washable filter, for about $45. Over the long haul, this is less expensive than purchasing throw-away outer filters, which will go quickly.
It's best to install it near the ceiling. (The unit has four eye bolts for this purpose, although you'll need a friend to help with the heavy lifting during the initial installation.)
The remote is handy, allowing for "on/off", three speed operation and setting the automatic timer to shut off after 2, 4 or 6 hours.
There are other units on the market. I selected this one because the ratio of the cubic feet per minute rating to the price made this purchase decision a no brainer.
If your spouse give you a hard time about spending money on dust collection systems, tell him or her that this will help make sure you'll be around a bit longer (assuming this is a persuasive argument in your family). At least this argument worked for me.
I suggest using this for secondary filtration. I agree with the pro's that the best way to capture dust is at the source, which is why I have a high powered, cyclonic dust system as my primary dust remover.
However, it's often difficult, if not impossible, to capture all the dust at the source, in which case, this ambient filter provides an efficient method for getting rid of what the cyclonic dust collector misses. Examples include the fine dust from large sanding projects and blowing sawdust off of tools using an air compressor.
I purchased the optional, washable filter, for about $45. Over the long haul, this is less expensive than purchasing throw-away outer filters, which will go quickly.
It's best to install it near the ceiling. (The unit has four eye bolts for this purpose, although you'll need a friend to help with the heavy lifting during the initial installation.)
The remote is handy, allowing for "on/off", three speed operation and setting the automatic timer to shut off after 2, 4 or 6 hours.
There are other units on the market. I selected this one because the ratio of the cubic feet per minute rating to the price made this purchase decision a no brainer.
- Was this review helpful? Yes (8) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (8) No (0)
- Flag as Inappropriate
This unit was heavier and more...
This unit was heavier and more awkward to handle than I thought. I put four eye bolts in my shop ceiling and used a simple rope system to lift it up and clipped it there with 4 small carabiners.One problem I had was the unit was not shipped with the remote control nor the eyebolts to hang it with. I wrote Rockler and after a phone call for the serial number I got a package in the mail a few days later with a remote, nuts, washers and two eyebolts. I went to my local hardware store and bought two more eyebolts. The ones from Jet are 6mm or 1/4" fine thread. I could not find this size so i forced in the course thread. Easy to do in the aluminum nutsert on the unit. Now I have a filter in my shop and I love it. I can already tell how much cleaner the air is. Nice machine JET! If you don't have an air filter you need to get this one! You will not be disappointed!
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
December 23, 2010
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
Great product
I should have got this years ago , very quite and keeps my shop dust free I use it around a cnc machine at this time.
- Was this review helpful? Yes (6) No (1)
- Flag as Inappropriate
September 19, 2014
- Was this review helpful? Yes (6) No (1)
- Flag as Inappropriate
1.Easy ceiling mounting-takes two people because...
1.Easy ceiling mounting-takes two people because of size.2.Quiet running-hardly noticeable addition to general noise level in shop.3.Good job at reducing the fine dusts in the air that can ruin a fresh coat of sealer.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
September 30, 2010
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Clean shop air
This is an excellent product that I've recommended over and over to my friends. I have it hung from the ceiling in my garage shop, run it on low power, and its amazing how much dust it pulls out of the air. The exterior filter will turn the color of the wood you are sanding very quickly, proving its effectiveness. Stock up on good quality, 12 X 24 filters!
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
I'm quite happy with this air filter. My shop is 30 by 24 and it works wonderful!
The filters are easy to replace and available in nearl every hardware store. It is easy to operate and will operate without the remote. At my shop size of 30 by 24, medium speed works great. Only on extreme sanding jobs do I need to run it on high.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
better air=goood
Bought on sale, it has proved to be a great filter, eliminating fine dust from the shop. The remote control is a good accessory to have. It is a little on the heavy side, you should plan on some help to install it. Hanging it from 's' hooks is not a good option--screwing it to the roof system, into rafters or a piece of plywood or boards screwed to the rafters is the way to go IMO. Plan on the outlet to plug it into being fairly close, the cord is not overly long.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
QUIET POWERFUL MOTOR
This is my Jet Air Filter in my Basement/Wood Shop.
So far it works very well. Don't forget to remove the styrofoam packing from around the fan on the inside before using. You have to remove both filters to get to it. On the ground it works really good for me. I got it downstairs one step at a time and dragged it across the floor on a rubber mat where it sits.
This way you can see the settings which light up in the back and easily check/change the filter. It also helps keep my cats hair down and keeps the furnace clean downstairs. I used to have a tower air purifier and it did not last long. This is very powerful and you can not hear it when your lathe is going. Then I got a $50 Gift Certificate which I already used.
So far it works very well. Don't forget to remove the styrofoam packing from around the fan on the inside before using. You have to remove both filters to get to it. On the ground it works really good for me. I got it downstairs one step at a time and dragged it across the floor on a rubber mat where it sits.
This way you can see the settings which light up in the back and easily check/change the filter. It also helps keep my cats hair down and keeps the furnace clean downstairs. I used to have a tower air purifier and it did not last long. This is very powerful and you can not hear it when your lathe is going. Then I got a $50 Gift Certificate which I already used.
This is my Jet Air Filter in my Basement/Wood Shop.
It is on the floor which is easiest to care for.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
