Overview
Improve your accuracy and make repeat cuts more easily with the Kreg Top Trak Fence. This anodized aluminum extrusion features a self-aligning L-shaped mounting foot for easy installation to the top side of a shop-made 3/4" thick fence. Simply drill 1/8" holes through the back of the extrusion and secure with the included mounting screws. The top of the track also contains a recess for attaching a self-adhesive 1/2" measuring tape (sold separately). Use with the Kreg Flip Stop for Top Trak Fence (#21938, sold separately) to square an end of your stock and cut it to length without moving the stop.
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions
Browse 4 questions
and 39 answers
Why did you choose this?
Rockler Store
Needed for a new RAS station in the shop I'm building, with 8ft in and outfeed tables.
Steven S
on Jul 11, 2017
To make a more precise cross cut sled got my table saw
Carole St Laurent G
on May 5, 2017
Needed for a new RAS station in the shop I'm building, with 8ft in and outfeed tables.
Steven S
on Jul 11, 2017
Just bought a used router table and am upgrading it
William N
on May 19, 2017
Will this stop work on the Kreg Top Trak system? Im looking for a good option for a flip stop steup on my drill press table. My drill press fence already has the Kreg Top Trak on it. I know you can use the Kreg Flip stops for this. I am looking for a cheaper/smaller sized flip stop to use with my drill press table.
Kreg™ 48'' Top Trak Fence
BEST ANSWER: I have this system. I had built a shop built system with several stops. The top of my system was built out of Popular but when I used my shop built system, the bolt sunk into the wood and was hard to move. The Kreg system moves with ease. I use mine on a miter saw system.
- Reply
- Inaccurate
- Bill W on Jun 9, 2015
- Purchased on Apr 3, 2015
Can this be cut in half for mounting on each side of a miter saw ?
BEST ANSWER: Yes....I have cut this material using a metal cutting blade in my jig saw...cuts easily...you just need to secure i the material firmly while cutting it ...and wear eye protection !!! the ends would need to be finished with a metal file to remove any burs
hope this has helped !
hope this has helped !
- Reply
- Inaccurate
- GARY C on Jun 23, 2017
- Purchased on Jul 9, 2015
Does the Trak Fence come in longer lengths?
BEST ANSWER: I'm not sure however I have found that the 48"all I need. I guess you could put 2 of them together for a 8' footer. ////i have one on each end of my chop saw. I hope this helps
- Reply
- Inaccurate
- Jack G on Jun 16, 2015
- Purchased on Jan 23, 2015
Reviews
4.9 / 5.0
10 Reviews
accuracy greatly improved
I built a Miter saw bench with a 48 in left side feed ramp and a 24 in right side feed ramp. I ordered two 48 in top track fences and a left to right and a right to left read measuring tapes and a Flip stop.. every thing assembled easily. it would have helped me with detailed instructions on aligning the tape to use the 3/8 in off set on the flip stop.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Kreg™ 48'' Top Trak Fence
Very easy to install, very heavy duty construction, no complaints thus far but I've only used it for a couple months thus far. I bought two for the left side of my miter saw station and one for the right side to give me a lot of capacity in either direction. I purchcased two of the Kreg Flip Stops and left to right and right to left directional self adhesive 1/2" tape with both standard & metric units from Amazon. I didn't see where Kreg sold both directional tapes to fit their Top Trak if I needed lengths greater than 4 to 6ft.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Great I made a fence for my drill press. Can't believe I use more now than ever.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Miter saw track
I was a little concerned about the price of the investment I had to make($150), but when it was done I realized it was the best money I've spent in my shop yet.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Kreg 48" top track
A great track for specialized jigs such as used with a miter saw. The top track has space for a L-R rule or a R - L rule.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Kreg Top track review
I have these on my drill press, miter saw and radial arm saw. Work fine for repetitive cuts. A little pricey but they never wear out. Use the Kreg stops too.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
kreg top trac
I made a cross-cut sled with the Kreg Top Trak, i also added the Keg stop block and Rockler tapes to finish it off. Very happy with this project.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
easy
direction were very accurate and easy to install. Very costly but worth it if your wanting accuracy and wanting to speed up your production. I waited till it went on sale to buy. buy the kreg flip top that fits the top trak fence. Perfect setup
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
trac fence
Looking for a low to mid range fence when the accuracy of a digital fence is not required. Very good quality for the money.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
