Deck Jig System includes all shown components  Zoom

Kreg Deck Jig System

Item #: 36613
$79.00
Each In Stock

Overview

The best helper you'll ever have for building decks, fencing and more! This jig guides you as you drill and drive deck screws at the optimal angle to achieve concealed fastening of deck boards. No more exposed nails or screws! An easy grip handle and 90° alignment tab make setup extremely easy. The onboard drilling jig is preset at the optimal angles for straight-on as well as left and right corner fastening. Simply drill your holes with the included bit and drive the deck screws with the included square drive bit. Spacer rings are included to ensure uniform, accurate spacing of deck boards.

Additional Features:

  • Includes the Deck Jig, 6" drill bit, 6" KTX square driver bit, 100 Protec-Kote deck screws, three 5/16" spacer rings, three 1/4" spacer rings, two stop collars, allen wrench, instructional DVD and durable carrying case.
  • For stock from 3/4" to 1-1/8" thick.

Tech Spec

Brand Kreg
Manufacturer Part Number KJDECKSYS
Weight (lbs) 3.6500

Reviews

Customer Reviews

6 Review(s)

View All

It is very easy to set...

William N from Kelso, WA Posted July 20, 2013
It is very easy to set up, learn, and use. My two teenage grandchildren did the whole 12' x 24' deck. We timed them at 3 minutes per 12' cedar board. The deck looks wonderful with no surface holes. It's really a great product, and is well worth the cost, even with free labor.

What a little ripper..!!! Just did...

Ross P from Canberra, ACT, Australia Posted December 29, 2011
What a little ripper..!!! Just did my 5 metre by 4 metre decking using Aussie hardwood which is tough and tends to curve and cup until nailed screwed down. The Kreg worked wonderfully....another winner from Kreg.

I just finished my 20 x...

Tom O from Gaithersburg, MD Posted August 1, 2010
I just finished my 20 x 10 deck and I am planning a new 16 x 16 add-on section. If you want blind fasteners this system is considerably less expensive, even if you are using stainless, which I did. Plan on using two drills, one for the drill bit and one for the driver, and the driver requires a torque setting so you don't strip the threads in the decking (My Craftsman 1/2" driver drill that comes in the two drill set needed a setting of 13). To do face fastening, drill a dowel down the center and then carefully cut it to length, then slip it over the drill bit to use as a depth stop.Kreg's product support is excellent, they shipped some jigs with drill bits that broke easily, but just a phone call and I got a free replacement, and even a human answered the phone!

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Kreg Deck Jig
  • Kreg Deck Jig Review

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X