Includes miter gauge, 24' fence, self-adhesive tape and flipstop.  Zoom

Kreg™ Precision Miter Gauge System

Item #: 25647
$139.00
Each In Stock
Provides speed, repeatability and extreme accuracy.

Overview

Positive stops at 0°, 10°, 22-1/2°, 30° and 45° - and micro-adjustability to 1/100° - give you speed, repeatability and the same accuracy that machine shops strive for!
  • Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say "goodbye" to mitered joint gaps forever.


Technical Details:
  • Factory calibrated and accurate right out of the box.
  • Micro-adjusts to 1/100th of a degree (.003" over 6") - the same accuracy as the best machinist squares.
  • Vernier scale allows precise angle adjustments to 1/10th of a degree.
  • Positive stop settings with pin allow quick, foolproof position changes at 0°, 10°, 22-1/2°, 30° and 45°.
  • Precision flipstop precisely measures distance from the blade; curved face self-elevates to bypass the stop.
  • Precision 24" long, 3/4" aluminum bar contains five bar adjusters to eliminate play in the miter slot.
  • Fits both standard and T-track slots.

Tech Spec

Brand Kreg
Manufacturer Part Number KMS7102
Weight (lbs) 6.0600

What's included:


  • Kreg Precision Miter Gauge
  • 24" aluminum fence
  • 24" bar
  • Right-to-left self-adhesive tape
  • Flipstop
  • hardware and instructions

Technical Downloads:

Reviews

Customer Reviews

13 Review(s)

View All

Bought for my Hitachi CF10 table...

Guest from Kent, WA Posted May 28, 2012
Bought for my Hitachi CF10 table saw. Once set up with the easy to understand instructions, this miter gauge is dead on accurate. Previously I always struggled with making perfectly sized mitered corners at my miter saw with a laser guide - my measurements almost always ended up a micro-fraction off resulting in miter corners with gaps. The Kreg Miter Gauge is worth its weight in gold for it's dead on accuracy both in perfect 45 degree miters and in consistant measurements cut time after time after time. After having my Kreg M.G. if I ever had to replace it, knowing what I know now, I'd gladly pay double it's current price tag.

The most accurate and best miter...

Gary D from Bemus Point, NY Posted March 13, 2010
The most accurate and best miter gauge I've ever had. Took a little time putting it together and adjusting it on the saw but was worth it. The blue color is great.

This miter gauge was just what...

William W. L from Santa Fe, NM Posted December 17, 2009
This miter gauge was just what I wanted. Began cutting smaller more accurate pieces on my table saw and the gauge that came with the saw just wasn't doing it. This is very easy to set up and use. The only problem I had was with the plastic adjusting screws on the bar for the "T" slot. The holes for them were poorly tapped - a lot of metal filings in hole. Had a terrible time getting screws in holes and got one stuck so badly that the head broke off and I had to drill it out and re-tap the hole. Chased all other holes with a tap, then everything was OK. Highly recommend this gauge with a 10/32 tap. NOTE: The instruction manual was not up to date with the enclosed parts (which were better). Easy to figure out but shouldn't have had to.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X