Overview
Positive stops at 0°, 10°, 22-1/2°, 30° and 45° - and micro-adjustability to 1/100° - give you speed, repeatability and the same accuracy that machine shops strive for!
Technical Details:
- Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say "goodbye" to mitered joint gaps forever.
Technical Details:
- Factory calibrated and accurate right out of the box.
- Micro-adjusts to 1/100th of a degree (.003" over 6") - the same accuracy as the best machinist squares.
- Vernier scale allows precise angle adjustments to 1/10th of a degree.
- Positive stop settings with pin allow quick, foolproof position changes at 0°, 10°, 22-1/2°, 30° and 45°.
- Precision flipstop precisely measures distance from the blade; curved face self-elevates to bypass the stop.
- Precision 24" long, 3/4" aluminum bar contains five bar adjusters to eliminate play in the miter slot.
- Fits both standard and T-track slots.
Related articles
Tech Spec
| Brand | Kreg |
|---|---|
| Manufacturer Part Number | KMS7102 |
| Weight (lbs) | 6.0600 |
What's included:
- Kreg Precision Miter Gauge
- 24" aluminum fence
- 24" bar
- Right-to-left self-adhesive tape
- Flipstop
- hardware and instructions
Technical Downloads:
Reviews
The most accurate and best miter...
Posted March 13, 2010
The most accurate and best miter gauge I've ever had. Took a little time putting it together and adjusting it on the saw but was worth it. The blue color is great.
The scales are fine, the aluminum...
Posted March 10, 2010
The scales are fine, the aluminum piece bends with only minor force, which will throw off your angles.
This miter gauge was just what...
Posted December 17, 2009
This miter gauge was just what I wanted. Began cutting smaller more accurate pieces on my table saw and the gauge that came with the saw just wasn't doing it. This is very easy to set up and use. The only problem I had was with the plastic adjusting screws on the bar for the "T" slot. The holes for them were poorly tapped - a lot of metal filings in hole. Had a terrible time getting screws in holes and got one stuck so badly that the head broke off and I had to drill it out and re-tap the hole. Chased all other holes with a tap, then everything was OK. Highly recommend this gauge with a 10/32 tap. NOTE: The instruction manual was not up to date with the enclosed parts (which were better). Easy to figure out but shouldn't have had to.
Setup was straight forward. Accuracy is...
Posted August 18, 2008
Setup was straight forward. Accuracy is dead on. Quality is excellent. I compared it to the Incra fence and did not like the stick on scales of the Incra.
Great product. Mine had a few...
Posted August 8, 2008
Great product. Mine had a few little issues, but nothing that warranted less stars. The plastic inserts (which control play in the t-slot) did not easily thread into the unit. there was some aluminum still left in one hole from machining. Once you set it up properly the thing is deadly accurate, which is good when you need things to line up properly. I like the large handle, and of course the color. Easy to read scale is a plus.
Videos
Related Products
Swipe to see more
You may also like
Swipe to see more
