Overview
These oversized clamping feet provide broader, more stable clamping pressure and eliminate the risk of marring - even on soft woods like pine. Swivel-action 1-5/8" diameter foot works great for clamping angled stock. Available in two stud lengths. The extra-long 6" foot is ideal for use on a miter gauge or wherever extended reach is needed. Includes nuts and washers. Clamps sold separately.
Features:
Features:
- Standard 5/16"-18 TPI stud size works with most existing toggle clamps
- Foot has an overall diameter of 1-5/8", with a soft clamping pad that measures 1-3/8" in diameter
- Works great for pocket hole assembly jigs
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions
Browse 2 questions
and 3 answers
Why did you choose this?
Rockler Store
I make custom hold downs and the length of this is very usable and handy.
Big Mike
on Nov 30, 2016
Better holding power on jigs I use regular for edging long boards.
Eldon P
on Aug 21, 2016
I make custom hold downs and the length of this is very usable and handy.
Big Mike
on Nov 30, 2016
I need additional length for a vertical clamp to be placed atop my fence on a miter gauge which is used with a cross cut sled.
Umpire.20
on Aug 21, 2016
Does the rubber foot on the bottom come off? I need to put on a 7" bolt.
BEST ANSWER: No. The bolt is attached (glued?) to a ball which fits into a recess in the rubber foot. It is kind of like a hip joint with the bolt playing the role of the femur. I just had a look and there is no obvious way to remove the rubber foot.
- Reply
- Inaccurate
- Walter K on Jun 4, 2017
- Purchased on Jun 22, 2015
Do these clamp fit my Kreg K3 jig clamp follower?
Reviews
4.3 / 5.0
6 Reviews
Take care when using these 6" clamps
These are sufficiently long to use them on tall stands. They can be set to lock down 5 1/2" boards and still be able to reach down to hold very thin boards on jigs. However the extended length can and will swing back if you are not careful to note how far back it goes before you begin to use it.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
I bought this clamp foot to...
I bought this clamp foot to use on a shop made panel cutting jig for the table saw. It allows me to mount the toggle clamp on the fence that is part of the jig and then clamp any thickness of board in the jig while I saw it. Works perfectly.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
July 13, 2008
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
The Foot is great, just what...
The Foot is great, just what I was looking for!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
January 22, 2011
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Oops!
I thought "large" meant length not width. My bad. My clamps require 1/4" bolt width and this is 5/16". I'm going to try modify the clamp opening with a 5/16" drill bit then tap it. If that doesn't work, I'll buy a 5/16" clamp. One way or another, I'll use it.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
This product worked exactly as is should The threads were clean and correct. Loved this product.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Gives extended length to handle all...
Gives extended length to handle all thickness of various material.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
November 24, 2007
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
