This tower stands 75 -3/4'' overall and is designed to hold both CDs or DVDs using Rockler CD (35434) or DVD (38094) strips.

Using a simple box type construction you can build this project. Use solid boards or edge-bonded plywood. Start by cutting all of your materials as listed in the materials list below. On parts "A" cut a 3/8'' wide by 1/4'' deep rabbet as shown in figure 1. On parts "D" and "E" you can route a decorative edge as desired.

Begin assembly by constructing the main "box" using parts "A", "B", & "C" as indicated in the exploded view of this plan. Join the corner with glue and nails or plugged screws, dowels or biscuits. Apply parts "D" and "E" as shown in figure 2.

Finish as Desired.

Apply CD or DVD strips flush with front edge for best results and enjoy.

Materials List for CD Version
A. (2) 3/4'' x 5-1/4'' x 73-1/2''
B. (1) 1/4'' x 5-3/4'' x 73-1/2''
C. (2) 3/4'' x 5'' x 5''
D. (2) 3/4'' x 8'' x 8''
E. (1) 3/4'' x 11'' x 11''
F. (2) 6' Rockler CD Holder Strips

Materials List for DVD Version
A. (2) 3/4'' x 5-1/4'' x 73-1/2''
B. (1) 1/4'' x 8-1/8'' x 73-1/2''
C. (2) 3/4'' x 7-5/8'' x 5''
D. (2) 3/4'' x 10-5/8'' x 8''
E. (1) 3/4'' x 13-5/8'' x 11''
F. (2) 6' Rockler DVD Holder Strips

© 2001 Rockler Woodworking and Hardware