Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100  Zoom

Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

Item #: 62689
$59.99
Each In Stock
Safer and more precise than conventional push blocks.

Overview

The GRR-Ripper is a precision-guidance 3D Push Block System designed to feed wood on a table saw more safely than you can with your hands alone, and more accurately than with conventional push blocks. The result will be better projects with intact fingers and less waste. With its 3-Directional control, it gives you downward, forward, and lateral pressure on the stock for maximum control and safety.

The GRR-Ripper's patented design eliminates the need for bare-hand feeding, since it essentially acts as a movable blade guard that travels with your hand, rather than being affixed to the back of the table saw, or one that hovers above it. The GRR-Ripper becomes an unyielding barricade between the table saw blade and both of your hands. Maximizing the use of your materials no longer has to compromise your safety. Aside from the safety, you truly get better cuts. Seeing is believing. Watch a video Demo of the GRR-Ripper by clicking on the "Videos" tab above.

Technical Details

  • Results in a perfectly straight cut and safely keeps your hands away from the cutting elements.
  • With grooved, non-slip pads on bottom and adjustable handle.
  • Attachment kit (sold separately) consists of additional spacer and stabilizing accessory plate for extra control - ideal for narrow ripping.
  • Micro jig Handle Bridge (sold separately) provides four contact points to apply more downward pressure across the entire width of the Micro Jig GRR-Ripper's body for better control. Also includes replaceable push foot.
  • Micro Jig GRR-Ripper instructional DVD covers over 30 applications of the Micro Jig GRR-Ripper System on four different machines: table saw, router, jointer and band saw. 120 minutes.

Tech Spec

Manufacturer Part Number GR100Y
Weight (lbs) 1.8400

What's included:

Micro Jig GRR-Ripper® Basic 3D Push Block System (GR-100) with Instructional DVD

Technical Downloads:

Reviews

Customer Reviews

27 Review(s)

View All

Good product

Robert Posted February 2, 2015
I needed to make 8 foot long rip cuts from a sheet of plywood and one side was to have a 45 degree angle. I dreaded the thought. First I used a circular saw and straight edge to cut the plywood sheet into boards 8 feet long and 8 inches wide. Easy enough - now the difficult part. I needed to cut each board in half lengthwise on the table saw set at 45 degrees. I purchased 2 Gripper units as suggested for making long rip cuts and couldn't be more pleased with the outcome. I felt safe, the board stayed true to the fence with no pinching and the final product of my work was better than I imagined it would be thanks to these units. I give an A+. I just bought the basic units by the way.

gripper

John Posted February 2, 2015
Easy to use and set up. Safe especially on my contractors saw. A little slippery sometimes--a drop down push blade at the end of the cut would be nice or maybe just a piece of double sticky tape.

Well made and makes it safer for woodworking

Troy Posted May 24, 2014
I had my reservations about this item, but when I saw Steve Ramsey use it, I knew it had to be decent, so I went for it. I just tried it out today and I must say, I felt very safe on my table saw on relatively small pieces, although it would be wise to have 2 to do the over and under method for longer pieces of wood. It takes seconds to adjust for any type of lumber. Just make sure you have your necessary clearance from the blade versus the grr-ripper. I highly recommend this for any woodworker on almost any type of lumber (I probably would say it won't work on melamine or any type of ultra-smooth surface).

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Micro Jig GRR-Ripper - Get A Grip! Video
  • Micro Jig GRR-Ripper video 2

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.
Feedback X