Micro Jig ZeroPlay™ Guide Bar System  Zoom

Micro Jig ZeroPlay™ Guide Bar System

Item #: 30614
$34.99
Set In Stock

Overview

Each guide bar is composed of two interlocking plastic bars that adjust laterally to the exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector, jointing fence alignment jig for the router table, and hold-down clamps made from scrap materials.

Tech Spec

Brand Micro Jig
Manufacturer Part Number ZP9-B2S2
Weight (lbs) 0.4200

Reviews

Customer Reviews

4 Review(s)

View All

I purchased the 2-bar "Guide Bar...

David N from Manistee, MI Posted February 12, 2011
I purchased the 2-bar "Guide Bar System" and two individual bars to make two different jigs for my table saw: a 45° sled for making picture frames and a jig for making cuts on the mitered corners of small boxes into which reinforcing/decorative splines are glued, and then, of course, trimmed and finished.The bars must be installed carefully, as per included instructions. They function exceptionally well and took much less time to install than it did to make and install hardwood slides on a 90°crosscut sled I built. I'll most certainly buy more with which to make future jigs.

I used 2 pair of your...

Robert A from Frisco, TX Posted June 6, 2010
I used 2 pair of your zero-play guides to build a 36x42 crosscut sled for my table saw. I also used the stops (with a shim) as a keeper to keep the sled from tipping off the table at the extremes. I build a lot of cabinets and used the sled to dado the shelf grooves. What a time saver! The zero-play guides were the key to a successful new shop tool.

I've very happy with the adjustability...

John C from MD Posted July 14, 2013
I've very happy with the adjustability of these bars, and would definitely recommend them. The only thing is the stops that come with the set are designed for a t-track miter slot, and will not work with a "standard" slot.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X