Wood Turning

  • Items 1 - 24 of 67
  • Page:
    1. 1
    2. 2
    3. 3
  • Products (67)
  • Full Size Round Ergonomic Carbide Turning Tool
    Full Size Round Ergonomic Carbide Turning Tool
    3 Review(s)
    $99.99 $59.99

    SAVE 40%

    This Carbide Turning Tool from Rockler features a replaceable, rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter stays sharp for longer…

  • Starter Pen Turning Kit
    Starter Pen Turning Kit
    14 Review(s)

    $72.49

    This kit contains all the essential tooling you need to start turning custom pens. Includes 3 pen blanks (Bloodwood, Bubinga and Olivewood), 3 gold-plated hardware kits with twist mechanisms, 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle…

  • Rockler Carbide Mini Turning Tool 3-Piece Set
    Rockler Carbide Mini Turning Tool 3-Piece Set
    12 Review(s)

    $189.99

    Our Mini Carbide Turning Tools feature a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutting edges stay sharper, longer…

  • Lathe Duplicator
    Lathe Duplicator
    14 Review(s)

    $331.99

    One good turn deserves another! Create precise duplicates of spindles, table legs and other turned projects. This Lathe Duplicator attaches easily to almost any floor-model lathe, and the handwheel allows for smooth operation while cutting.* Will duplicate to a maximum length of 39" (depending on…

  • Full Size Square Radius Carbide Turning Tool
    Full Size Square Radius Carbide Turning Tool
    $99.99 $59.99

    SAVE 40%

    Take a close look at the edge of this carbide cutter and you'll realize it's not actually square. Instead, each of its four edges is slightly crowned with a 2" radius. This subtle change makes the cutter excellent for smoothing cuts. The replaceable, rotatable cutter eliminates the hassle and…

  • Rockler Pen Press/Drilling Jig
    Rockler Pen Press/Drilling Jig
    34 Review(s)

    $99.99

    Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it…

  • Full Size Diamond Ergonomic Carbide Turning Tool
    Full Size Diamond Ergonomic Carbide Turning Tool
    1 Review(s)
    $99.99 $59.99

    SAVE 40%

    This Carbide Turning Tool from Rockler features a replaceable, rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter stays sharp for longer…

  • Lathe Dust Hood
    Lathe Dust Hood
    11 Review(s)

    $24.99

    Lathe dust collection has never been easier! Hood assembly features a hinged viewing shield that can swing up and out of the way. Hood mounts by clamping the bracket to the back of the lathe bed. * Includes convenient mounting bracket that allows easy installation onto many different styles of…

  • Exotic Cutoffs, 10 lb. Box
    Exotic Cutoffs, 10 lb. Box
    36 Review(s)

    $29.99

    A blend of assorted exotics - perfect for ornamental turnings and small projects. May include some rare species worth up to $25 per board foot. No two boxes are exactly the same! Sizes range from roughly 2" to 12" long. Widths and thicknesses vary widely. Box measures 8" x 6" x 12".

  • Rockler Carbide Pen Turning Tool 3-Piece Set
    Rockler Carbide Pen Turning Tool 3-Piece Set
    5 Review(s)

    $129.99

    At only 9-1/2" long, these tools are the perfect size for turning pens, bottle stoppers and other small items. Carbide cutters can be easily rotated to expose a fresh edge. The set includes one high speed steel 1/8" parting tool, and two tools with replaceable carbide cutters: a 1/2" round cutter…

  • Full Size Square Ergonomic Carbide Turning Tool
    Full Size Square Ergonomic Carbide Turning Tool
    $99.99 $59.99

    SAVE 40%

    This Carbide Turning Tool from Rockler features a replaceable, rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter stays sharp for longer…

  • Square Carbide Mini Turning Tool
    Square Carbide Mini Turning Tool
    1 Review(s)
    $69.99 $49.99

    SAVE 29%

    This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also…

  • Stock Center Finder
    Stock Center Finder
    6 Review(s)

    $9.79

    Works quickly and accurately to locate the center of stock for turning on a lathe or other purposes. No need for special calculations. This easy-to-use finder has no moving parts, so your measurements will be simple and consistent. Technical Details* Transparent yellow tinted plastic* Maximum 8"…

  • Diamond Carbide Mini Turning Tool
    Diamond Carbide Mini Turning Tool
    1 Review(s)
    $69.99 $49.99

    SAVE 29%

    This Diamond Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also…

  • Turning Finishing Kit
    Turning Finishing Kit
    1 Review(s)

    $15.99

    Obtain a hi-gloss scratch-free shine on a variety of contoured shapes in minutes with reusable 2" x 2" Finishing Pads! These aluminum oxide sanding pads are color-coded for easy identification of six different grits; includes 600, 800, 1500, 2400, 4000, and 12,000. Ideal for turning work and…

  • Rockler Stainless Steel Ice Cream Scoop Hardware Kit
    Rockler Stainless Steel Ice Cream Scoop Hardware Kit
    16 Review(s)

    $14.99

    Make your own deluxe dessert disher with this beautiful stainless steel scoop and ferrule. Get creative with a custom-turned wooden handle, then attach the hardware for the perfect finishing touch. Instructions for turning a handle and assembling the ice cream scoop are included. In addition to…

  • 4-3/4" Face Plates
    4-3/4" Face Plates
    2 Review(s)

    $29.99

    This 4-3/4” diameter face plate mounts to a wide variety of lathe spindles by changing the threaded 1" x 8 TPI insert (#22432 Sold Separately). It is capable of being with Delta and Jet lathes just to mention a few and is idea for small to medium sized turning projects. The face plate is…

  • Rockler Round Carbide Mini Turning Tool
    Rockler Round Carbide Mini Turning Tool
    1 Review(s)

    $69.99

    This Round Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening.* Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull.* The solid carbide cutter also…

  • Chrome Bottle Opener Turning Kit
    Chrome Bottle Opener Turning Kit
    8 Review(s)

    $9.99

    Create a custom bottle opener everyone will talk about with this complete Bottle Opener Turning Kit. Turn your own blank to give it a custom theme like none other! Includes a chrome-plated opener and a 5/16" threaded insert that lets you remove the handle for quick and easy washing. Technical…

  • Square Radius Carbide Mini Turning Tool
    Square Radius Carbide Mini Turning Tool
    $69.99 $49.99

    SAVE 29%

    This Square Radius Carbide Mini Turning Tool from Rockler features a subtle 2" radius that works perfectly for smoothing cuts. Additionally, the replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it…

  • Lathe Tool Holder
    Lathe Tool Holder
    14 Review(s)

    $27.99

    Keep your turning tools within reach! This specially designed holder mounts to most flatbed lathes to keep up to 12 turning tools and other turning supplies at the ready.* 12" diameter tray features six slots for standard size tools and six for miniature tools and spins to make tool selection…

  • 10" Contour Gauge
    10" Contour Gauge
    6 Review(s)

    $19.49

    New 10" length contour gauge is ideal for measuring moldings for reproduction, duplicating spindles on the lathe, fitting flooring around moldings, copying curves and a variety of other contour matching jobs around the home and shop. Technical Details:* 10" long* 1/8" increments and…

  • Combo Cork Screw and Stopper
    Combo Cork Screw and Stopper

    $9.99

    This dual-purpose chrome plated stopper makes a great gift for any wine enthusiast-even if that enthusiast happens to be yourself! The stopper features a flexible silicone ring that provides a fresh seal in bottle openings from 3/4" to 7/8" in diameter (large neck bottles). Plus, it unscrews to…

  • Confetti Lamp Inserts
    Confetti Lamp Inserts
    1 Review(s)

    $12.99

    These 1-1/2" diameter oil lamp inserts slide right into your hand turned bases, adding an elegant, professional appearance. Each insert includes a fiberglass wick, wick holder and a glass insert which holds up to 2 ounces of lamp oil (not included). This will be enough to keep them burning for up…

  • Items 1 - 24 of 67
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X