Nova

  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
  • Products (57)
  • Nova DVR 2024 20" x 24" Lathe with 8012 Infinity Chuck and Insert
    Nova DVR 2024 20" x 24" Lathe with 8012 Infinity Chuck and Insert
    1 Review(s)
    $3,495.99
    From: $3,199.99

    Turn on the Nova DVR 2024, and you'll be greeted with smooth, whisper-quiet operation, and rock steady turning. That's because its direct drive technology has no pulleys or belts to cause vibration, and its solid cast iron construction absorbs what little there is. The DVR's smart motor features…

  • Nova Chuck Jaw Sets
    Nova Chuck Jaw Sets
    3 Review(s)

    From: $41.49

    Choose the jaw set that best fits the needs of your turning project! Nova jaws boast superb holding power when matched with the appropriate workpiece. They cut into the wood, grip firmly in both contraction and expansion mode and provide high tear out strength. These jaws fit all of the Nova…

  • Nova G3 Comet II Reversible Chuck
    Nova G3 Comet II Reversible Chuck
    13 Review(s)

    $179.99

    The Nova G3 Comet II Chuck features a locking set screw that allows it to be used safely in reverse mode without the risk of unthreading. It is designed for the Nova Comet II Midi Lathe (46457, sold separately), but can be used on any lathe with a 1" 8-TPI RH thread. When used on non-reversing…

  • Nova G3 Insert Chuck
    Nova G3 Insert Chuck
    4 Review(s)

    $167.99

    The Nova G3 Chuck is a four-jaw, self-centering scroll chuck for Mini and Midi lathes with up to a 16" swing over the bed. It's an excellent high-powered geared chuck with TuffLock™ grip for incredibly solid, vibration free performance. The single-handed operation means more time turning and…

  • Nova Chuck Inserts/Adapters
    Nova Chuck Inserts/Adapters
    1 Review(s)

    $25.49

    Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading…

  • Nova Precision Midi 1" 8-TPI Direct Thread Chuck
    Nova Precision Midi 1" 8-TPI Direct Thread Chuck
    12 Review(s)

    $130.99

    The Nova Precision Midi Direct Thread Chuck is the smallest chuck in the Nova lineup—ideal for lathes with up to a 12" swing over the bed. Its small size minimizes the load on small spindles and bearings, yet is extremely accurate, and built to the same exacting standards as the…

  • Nova Sharpening Center Attachment
    Nova Sharpening Center Attachment
    1 Review(s)

    $117.99

    The Nova Sharpening Center attachment transforms your standard bench grinder into a precision sharpening machine, but without the cost of expensive sharpeners. It combines the slideway grinding jig and a powerful finger grind jig into one versatile sharpening tool. It utilizes a sturdy platform and…

  • Nova 10-in-1 Chuck Gauge
    Nova 10-in-1 Chuck Gauge
    2 Review(s)

    $15.49

    This tool combines all of the turner's most commonly used gauges into one efficient device. It includes a dovetail gauge, diameter gauge, center finder, dowel gauge, angle checker, dovetail marking tool, ruler, protractor and faceplate marking tool. With over 10 functions, you'll work faster and…

  • Nova Mini Cole Jaw Set
    Nova Mini Cole Jaw Set
    2 Review(s)

    $73.99

    The Nova Mini Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. Mini Cole Jaws are suitable for lathes with a minimum 8"/203mm swing diameter. Other Nova jaw sets (sold separately) can be…

  • Lathe Stand for Nova Comet II
    Lathe Stand for Nova Comet II

    $169.99

    The Comet II Lathe Stand provides a stable, no-nonsense turning station for your Comet II lathe. It is built from rugged square steel tubing for rigidity, then finished with a hardwearing powder coat that promises durability and protection from corrosion. It is adjustable in width, depth and…

  • Nova Cole Jaw Set
    Nova Cole Jaw Set
    3 Review(s)

    $93.99

    The Nova Standard Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. They are suitable for lathes with a minimum 12"/300mm swing diameter. Other Nova jaw sets (sold separately) can be fitted…

  • Nova Soft Jaw Set
    Nova Soft Jaw Set
    1 Review(s)

    $21.49

    Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also…

  • Nova 1624-44 16" x 24" Lathe
    Nova 1624-44 16" x 24" Lathe
    2 Review(s)

    $1,519.99

    The Nova 1624 Lathe boasts the most power, versatility and features of any comparable mid-range lathe. Its swiveling headstock rotates a full 360°, and locks at any position for outboard turning of large items. The powerful 1.5 HP motor delivers 50% more power than comparable lathes, and…

  • Nova Live Center System With Stepped Cone
    Nova Live Center System With Stepped Cone

    $82.99

    With over six functions in one handy unit, this unique live center system provides comprehensive tailstock support for virtually any spindle turning project. It boasts triple-bearing construction for excellent durability and incredibly smooth turning, even when higher speeds or clamping pressures…

  • Nova SuperNova 2 Insert Chuck
    Nova SuperNova 2 Insert Chuck

    $223.99

    The SuperNova 2 is a solid, powerful chuck, perfect for use on lathes with up to a 20" swing. It's an excellent, all-purpose geared chuck, suitable for a majority of users, and is packed with exciting, innovative features such as a fully sealed composite indexing backing plate and copper - infused…

  • Nova Comet II Bed Extension
    Nova Comet II Bed Extension

    $129.99

    Extend the spindle turning capacity of your Nova Comet II Midi Lathe! This bed extension adds 25-1/2" in length, extending the Comet II's distance between centers to 42". You can also add multiple bed extensions for even longer turnings. Solid cast iron throughout for durability and vibration-free turning.

  • Nova Dovetail Chisel
    Nova Dovetail Chisel

    $44.99

    Quickly cuts a dovetail that matches exactly with the dovetailed contour of your Nova Jaws, making it easy to mount bowl blanks onto your lathe. The precise fit and wedging action give the maximum holding power for your chuck. Although other chisels can be used, none have the dedicated shape of the…

  • Nova Titan 1-1/4" 8-TPI Direct Thread Chuck
    Nova Titan 1-1/4" 8-TPI Direct Thread Chuck
    1 Review(s)

    $317.99

    The Nova Titan Chuck is a four-jaw, self-centering scroll chuck for large lathes with a 20" diameter swing or larger. It is the largest, most ruggedly built chuck in the Nova range - a full 5" in diameter - and provides super aggressive holding power. The TuffLock™ geared grip provides…

  • Nova Simple Live Center
    Nova Simple Live Center
    2 Review(s)

    $24.49

    This is the standard live center included with all Nova lathes—use as a replacement or as an upgrade for another lathe. With heavy-duty sealed bearings, precisely machined medium tensile carbon steel construction, and a solid steel point to dig into the wood blank, the center provides a long…

  • Nova Tool Rest
    Nova Tool Rest
    1 Review(s)

    From: $29.99

    The tool rest is one of the most important features on any lathe. The rest should allow for maximum flexibility of chisel movement and provide adequate chisel support as close to the cutting edge as possible. These Nova tool rests are made of cast iron for excellent rigidity, and come with a…

  • Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread
    Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread
    1 Review(s)

    $25.49

    All insert-style Nova chucks use an easy and inexpensive insert/adapter system that lets you mount your chuck on virtually any lathe. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the…

  • Nova Pen Plus Jaws
    Nova Pen Plus Jaws
    12 Review(s)

    $44.99

    Nova's Pen Plus Jaws quickly convert your Nova chuck into a fast, accurate pen blank drilling tool. The large jaw profile provides a solid grip for all sizes of pen blanks, and a perfectly centered hole, every time. Being able to finely control the drill feed on your lathe helps to prevent break…

  • Nova Universal Chuck Spanner
    Nova Universal Chuck Spanner
    4 Review(s)

    $21.49

    Finding a wrench to fit your Nova chuck and inserts can be difficult. This handy all-in-one tool is an economic way to have a dedicated solution in your chuck toolbox. The Nova Spanner has a thin section that fits easily between the chuck and lathe where standard spanners can be too thick to insert…

  • Nova Safe-Lock Woodworm Screw
    Nova Safe-Lock Woodworm Screw

    $22.49

    Allows you to mount a wide variety of turning blanks simply by drilling a 5/16" hole. Just mount the Woodworm Screw in your lathe and thread the blank onto the screw. The screw has a deep thread that is machined right to the end, allowing an easy lead into the wood. The depth of the thread and core…

  • Items 1 - 24 of 57
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X