Nova

  • Products (63)
  • Nova Outrigger Lathe Accessory
    Nova Outrigger Lathe Accessory

    $284.99

    The Nova OR3000 Outrigger Accessory is for use with the Nova 3000, Nova DVR, Nova DVR XP and Nova 1624-44 lathes (sold separately). With the outrigger installed, you'll get rock steady chisel support when turning in the outboard mode, allowing you to turn blanks up to 29" in diameter. Just swing it…

  • Nova Pin Jaw Set
    Nova Pin Jaw Set

    $59.99

    These special 25mm extended jaws are designed to act like a pin chuck, expanding into a pre-bored hole. This is an especially useful holding method for bowls with a free form edge. A big advantage over pin chucks is that you don't have to bore to an exact size - any size between the minimum and…

  • Nova Cast Iron Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes
    Nova Cast Iron Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    $419.99

    Made from high quality cast iron, with CAD designed gussets at critical points, this stand makes a stable, rock steady base for both the Nova 1624-44 and the Nova DVR XP lathes (48465 and 45311, sold separately). Technical Details:* Solid cast iron construction.* CAD designed and tested for optimum…

  • Nova Step Jaw Set
    Nova Step Jaw Set

    $52.49

    These step jaws are designed to operate primarily in the contracting mode, gripping the base of footed bowls. The step sizes provide optimum gripping for three foot sizes with minimal crushing of the wood fibers. There is also an expanding dovetail so you have the option of gripping recessed bowls.…

  • Nova Spare Jaw Screws Kit
    Nova Spare Jaw Screws Kit

    $4.29

    This kit includes eight spare screws used to secure accessory jaws to your Nova chucks. They are the same high-quality screws shipped with your Nova chuck, and will keep you up and running in the event a fastener is lost or damaged. * Used to secure accessory jaws to your Nova chucks.* Comes…

  • Nova Chuck Fastening Spares Kit
    Nova Chuck Fastening Spares Kit

    $11.99

    The Nova Chuck Fastening Spares Kit is used to secure accessory jaws to your Nova chucks. The kit comes standard with all Nova chucks - this is a replacement kit to keep you up and running in the event a fastener is lost or damaged. The kit contains eight M6 screws, two hex wrenches, a grubscrew,…

  • Nova Cole Jaw Fastening Kit
    Nova Cole Jaw Fastening Kit

    $16.99

    These replacement bumpers are for use with the Nova Cole Jaws and Nova Mini Cole Jaws (45174 and 45274, sold separately). Use them as spares when your stock bumpers are lost, damaged or worn. * Replacement bumpers for use with the Nova Cole Jaws and Nova Mini Cole Jaws (45174 and 45274, sold…

  • Nova 75mm (3'') Bowl Jaw Set
    Nova 75mm (3'') Bowl Jaw Set

    $64.99

    This jaw set has great holding power for large bowls and moderately sized hollow forms. The dovetail walls are three times the thickness of conventional jaw types, which provide a much more secure grip for large or heavy turning blanks. The mounting screws go right through the wall section to add…

  • Nova Lathe Handwheel
    Nova Lathe Handwheel

    $31.49

    The Nova Lathe Handwheel is used on the outboard end of the headstock spindle, and can be used to rotate the turning blank or to slow down the spindle by hand once the lathe is switched off. Made from precision machined solid 1045K steel for extra strength and rigidity. A custom wooden handwheel…

  • Nova Insert/Adapter, Blank, Unthreaded
    Nova Insert/Adapter, Blank, Unthreaded

    $22.99

    If you have a unique lathe with a non-standard spindle thread, you can still install a Nova chuck on it. This blank Insert/Adapter can be threaded to match spindles up to 1-1/8" (28mm). The outer diameter is pre-threaded - simply screw it into the back of any current model of Nova chuck. *…

  • Nova Faceplate Rings
    Nova Faceplate Rings

    From: $33.50

    Faceplates have always been regarded as a safe and secure holding method for large turnings such as bowls and platters. The only drawback is that they are a slower mounting method when compared to scroll action chucks. Now, however, you can have the best of both worlds! Nova Faceplate Rings offer…

  • Nova Comet II Versaturn Coupler
    Nova Comet II Versaturn Coupler

    $31.49

    With just a 1/4 turn of the Versaturn Coupler, you can transform your Comet II Midi Lathe into a variety of tools, including a precision bench grinder. The coupler lets you easily remove and attach any Versaturn Accessory (sold separately)- just insert the end into the coupler and rotate the sturdy…

  • Nova 75mm (3'') Long-Nosed Jaw Set
    Nova 75mm (3'') Long-Nosed Jaw Set

    $71.99

    A generous 2" extension beyond the mounting base gives these unique long-nosed jaws a deep reach for tremendous holding power, both internally and externally. The external dovetail provides a secure grip when used in expansion mode with bowls, and the internal dovetail is ideal for use with footed…

  • Nova Mini 20mm Jaw Set
    Nova Mini 20mm Jaw Set

    $31.99

    The Nova Mini Jaws are ideal for use with mini and midi lathes, and are capable of holding work below the size handled by the 25mm (1") jaws. They are designed to securely hold small bowls up to 6" in diameter, and small, free-end spigot turnings up to 5" long. They can be used in expansion mode…

  • Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes
    Nova Hybrid Lathe Stand for Nova 1624-44 and Nova DVR XP Lathes

    $304.99

    Nova's 25048 Hybrid Lathe Stand provides a solid, yet lightweight foundation for your Nova DVR XP Lathe (45311, sold separately). Made from a mix of solid steel and cast iron, it provides rigid strength, but is light enough for easier portability. The stand also comes standard with the Nova 1624-44…

Feedback X