Wood Turning

  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
  • Products (53)
  • Nova G3 Insert Chuck
    Nova G3 Insert Chuck
    4 Review(s)
    $167.99 $109.99

    SAVE 35%

    The Nova G3 Chuck is a four-jaw, self-centering scroll chuck for Mini and Midi lathes with up to a 16" swing over the bed. It's an excellent high-powered geared chuck with TuffLock™ grip for incredibly solid, vibration free performance. The single-handed operation means more time turning and…

  • Nova G3 Comet II Reversible Chuck
    Nova G3 Comet II Reversible Chuck
    5 Review(s)
    $179.99 $119.99

    SAVE 33%

    The Nova G3 Comet II Chuck features a locking set screw that allows it to be used safely in reverse mode without the risk of unthreading. It is designed for the Nova Comet II Midi Lathe (46457, sold separately), but can be used on any lathe with a 1" 8-TPI RH thread. When used on non-reversing…

  • Nova SuperNova 2 Insert Chuck
    Nova SuperNova 2 Insert Chuck
    $223.99 $149.99

    SAVE 33%

    The SuperNova 2 is a solid, powerful chuck, perfect for use on lathes with up to a 20" swing. It's an excellent, all-purpose geared chuck, suitable for a majority of users, and is packed with exciting, innovative features such as a fully sealed composite indexing backing plate and copper - infused…

  • Nova Chuck Inserts/Adapters
    Nova Chuck Inserts/Adapters
    1 Review(s)
    $25.49 $20.99

    SAVE 18%

    Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading…

  • Nova Chuck Jaw Sets
    Nova Chuck Jaw Sets
    2 Review(s)
    $50.49
    From: $40.99

    SAVE 19%

    Choose the jaw set that best fits the needs of your turning project! Nova jaws boast superb holding power when matched with the appropriate workpiece. They cut into the wood, grip firmly in both contraction and expansion mode and provide high tear out strength. These jaws fit all of the Nova…

  • Nova Precision Midi 1" 8-TPI Direct Thread Chuck
    Nova Precision Midi 1" 8-TPI Direct Thread Chuck
    8 Review(s)
    $130.99 $99.99

    SAVE 24%

    The Nova Precision Midi Direct Thread Chuck is the smallest chuck in the Nova lineup—ideal for lathes with up to a 12" swing over the bed. Its small size minimizes the load on small spindles and bearings, yet is extremely accurate, and built to the same exacting standards as the…

  • Nova Cole Jaw Set
    Nova Cole Jaw Set
    1 Review(s)
    $93.99 $65.99

    SAVE 30%

    The Nova Standard Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. They are suitable for lathes with a minimum 12"/300mm swing diameter. Other Nova jaw sets (sold separately) can be fitted…

  • Nova Mini Cole Jaw Set
    Nova Mini Cole Jaw Set
    1 Review(s)
    $73.99 $59.99

    SAVE 19%

    The Nova Mini Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. Mini Cole Jaws are suitable for lathes with a minimum 8"/203mm swing diameter. Other Nova jaw sets (sold separately) can be…

  • Nova Simple Live Center
    Nova Simple Live Center
    2 Review(s)
    $24.49 $20.99

    SAVE 14%

    This is the standard live center included with all Nova lathes—use as a replacement or as an upgrade for another lathe. With heavy-duty sealed bearings, precisely machined medium tensile carbon steel construction, and a solid steel point to dig into the wood blank, the center provides a long…

  • Nova Live Center System With Stepped Cone
    Nova Live Center System With Stepped Cone

    $82.99

    With over six functions in one handy unit, this unique live center system provides comprehensive tailstock support for virtually any spindle turning project. It boasts triple-bearing construction for excellent durability and incredibly smooth turning, even when higher speeds or clamping pressures…

  • Nova 10-in-1 Chuck Gauge
    Nova 10-in-1 Chuck Gauge
    2 Review(s)

    $15.49

    This tool combines all of the turner's most commonly used gauges into one efficient device. It includes a dovetail gauge, diameter gauge, center finder, dowel gauge, angle checker, dovetail marking tool, ruler, protractor and faceplate marking tool. With over 10 functions, you'll work faster and…

  • Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread
    Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread
    1 Review(s)
    $25.49 $20.99

    SAVE 18%

    All insert-style Nova chucks use an easy and inexpensive insert/adapter system that lets you mount your chuck on virtually any lathe. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the…

  • Nova Pen Plus Jaws
    Nova Pen Plus Jaws
    6 Review(s)
    $44.99 $36.99

    SAVE 18%

    Nova's Pen Plus Jaws quickly convert your Nova chuck into a fast, accurate pen blank drilling tool. The large jaw profile provides a solid grip for all sizes of pen blanks, and a perfectly centered hole, every time. Being able to finely control the drill feed on your lathe helps to prevent break…

  • Nova Tool Rest
    Nova Tool Rest
    1 Review(s)

    From: $29.99

    The tool rest is one of the most important features on any lathe. The rest should allow for maximum flexibility of chisel movement and provide adequate chisel support as close to the cutting edge as possible. These Nova tool rests are made of cast iron for excellent rigidity, and come with a…

  • Nova Mini Spigot Jaw Set
    Nova Mini Spigot Jaw Set
    1 Review(s)
    $46.99 $39.99

    SAVE 15%

    These are powerful spigot jaws for smaller delicate work. The longer jaws provide the strong grip needed for small, unsupported spigot work, while the dovetail profile around the exterior of the jaws allows for expansion into small dovetailed recesses. Made from K1045 steel for maximum structural…

  • Nova Soft Jaw Set
    Nova Soft Jaw Set
    $21.49 $17.99

    SAVE 16%

    Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also…

  • Nova Mini Jaws Package
    Nova Mini Jaws Package
    1 Review(s)

    $124.99

    Get the complete suite of Nova mini jaws in one cost-saving package! The bundle consists of four sets of jaws: the Nova Mini 20mm Jaws, Nova Mini Spigot Jaws, Nova Mini Step Jaws and Nova 70mm Jaws. All are ideal for use with the Nova Precision Midi Chuck (47447, sold separately) mounted on a mini…

  • Nova Spigot Jaw Sets
    Nova Spigot Jaw Sets

    From: $55.99

    The Nova Spigot Jaw Set is specially designed to provide a strong contracting grip for unsupported spigot turning applications such as vases and goblets. It can handle spigots from 30mm (1.181") to 50mm (2"), and can also grip recessed bowls in expansion mode. Compatible with all Nova chucks (sold…

  • Nova Tailstock Chuck Adaptor
    Nova Tailstock Chuck Adaptor

    $42.49

    When the time comes to finish off the bottom side of your bowl, this adapter helps you quickly flip and rechuck the bowl without the fussy alignment/truing process. Simply remove your Nova chuck with the bowl still mounted in it, and using the Nova Tailstock Chuck Adapter, install both onto the…

  • Nova Faceplate Rings
    Nova Faceplate Rings
    $37.49
    From: $22.99

    SAVE 39%

    Faceplates have always been regarded as a safe and secure holding method for large turnings such as bowls and platters. The only drawback is that they are a slower mounting method when compared to scroll action chucks. Now, however, you can have the best of both worlds! Nova Faceplate Rings offer…

  • Nova Pin Jaw Set
    Nova Pin Jaw Set
    $66.99 $53.99

    SAVE 19%

    These special 25mm extended jaws are designed to act like a pin chuck, expanding into a pre-bored hole. This is an especially useful holding method for bowls with a free form edge. A big advantage over pin chucks is that you don't have to bore to an exact size - any size between the minimum and…

  • Nova Titan 1-1/4" 8-TPI Direct Thread Chuck
    Nova Titan 1-1/4" 8-TPI Direct Thread Chuck

    $317.99

    The Nova Titan Chuck is a four-jaw, self-centering scroll chuck for large lathes with a 20" diameter swing or larger. It is the largest, most ruggedly built chuck in the Nova range - a full 5" in diameter - and provides super aggressive holding power. The TuffLock™ geared grip provides…

  • Nova Step Jaw Set
    Nova Step Jaw Set

    $58.99

    These step jaws are designed to operate primarily in the contracting mode, gripping the base of footed bowls. The step sizes provide optimum gripping for three foot sizes with minimal crushing of the wood fibers. There is also an expanding dovetail so you have the option of gripping recessed bowls.…

  • Nova Comet II Versaturn Grinding Wheel Attachment
    Nova Comet II Versaturn Grinding Wheel Attachment

    $52.49

    Turn your Nova Comet II Midi Lathe into an all-purpose grinder and sharpener! The Versaturn Grinding Wheel includes a 6" white-stone wheel that, together with the Comet's variable speed adjustment, enables you to sharpen your turning tools and perform routine grinding without the burning often…

  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X