Rockler Sale Page
  • Items 1 - 24 of 339
  • Page:
    1. 1
    2. 2
    3. 3
  • Products (339)
  • Carbide Roughing Tool
    Carbide Roughing Tool
    16 Review(s)
    $65.99 $24.99

    SAVE 62%

    Here's a turning tool that never needs sharpening! Simply rotate the 360° carbide cutter when the old surface wears out.* Gives you a smooth finish on most materials* 16" solid hardwood handle gives you greater control and stability.* Ergonomically - correct 16" solid hardwood handle and brass…

  • Dust Right® Dust Separator
    Dust Right® Dust Separator
    81 Review(s)
    $79.99 $49.99

    SAVE 38%

    The created vortex effect collects dust and debris longer, without losing suction caused by prematurely clogged filters on any vacuum. 10-gallon translucent bucket is conveniently easy to empty. Holds twice the capacity of competitors' products and is easy to see when it's full. When used with most…

  • Norton 3X Sandpaper-20-Packs
    Norton 3X Sandpaper-20-Packs
    8 Review(s)
    $13.69 From: $9.99

    SAVE 27%

    Faster working, more durable and longer lasting than conventional sandpaper! This premium p-graded aluminum oxide grain gives you a quick cut with less pressure. You will get a smooth and consistent finish on all types of materials, including primed and painted surfaces. Will not clog, tear or…

  • Incra Miter 1000HD Miter Gauge
    Incra Miter 1000HD Miter Gauge
    23 Review(s)
    $189.99 $119.99

    SAVE 37%

    This high-definition gauge has 180 positive stops for pin-point accuracy at every degree (with special stops at +/-22.5°), plus a micro-adjustable vernier scale for fine-tuning to 1/10°. Add to that the industry's smoothest adjustable miter bar, a telescoping fence, a premium dual-arm flip…

  • All-In-One Clamp Guide Package w/Free Squaring Attachment
    All-In-One Clamp Guide Package w/Free Squaring Attachment
    2 Review(s)
    $179.99 $89.99

    SAVE 50%

    This package includes three All-in-One Clamp Guide lengths (24", 36" and 50") PLUS an accessory set of wide jaws for fast, accurate squaring of the clamp guides. You can attach your own wooden cauls to the squaring jaws in whatever length you need to achieve even more accurate squaring. The…

  • Rockler Drawer Lock Router Bit
    Rockler Drawer Lock Router Bit
    18 Review(s)
    $37.99 $26.59

    SAVE 30%

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

  • HVLP Spray System
    HVLP Spray System
    163 Review(s)
    $146.99 $119.99

    SAVE 18%

    Features adjustable spray nozzle for horizontal, vertical, or round flat positions. Included with your HVLP Spray System are: * Spray Gun w/Sprayer Station. Sprayer station plugs in and produces air flow to the spray gun via a turbine. * Sprayer Cup that attaches to spray gun; Replacement cups are…

  • Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars
    Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars
    1 Review(s)
    $540.99 $499.00

    Kreg® Precision Router Table System Much like the rip fences on high-end table saws, the T-square fence on Kreg's Precision Router Table keeps the fence precisely parallel to the miter slot, making tiny adjustments simple, and allowing you to enjoy all the benefits of the miter slot-all the…

  • Tool Box Pencil Hardware Kit
    Tool Box Pencil Hardware Kit
    $7.49 $2.99

    SAVE 60%

    Woodworkers weary of constantly resharpening broken pencil leads will be delighted with this Tool Box Pencil Hardware Kit. It features a massive lead almost 1/4" thick which allows it to be used on rough lumber much like a carpenter's pencil, with very low risk of breakage. A spring-action claw…

  • 45° Lock Miter Router Bit -1/2'' Shank
    45° Lock Miter Router Bit -1/2'' Shank
    20 Review(s)
    $57.99 $39.99

    SAVE 31%

    Tight miter joints are a hallmark of fine woodworking, and this bit will cut them in spades. Once cut, the miters interlock mechanically, and clamping is easy since the parts can't slide around. There is also more gluing area, so the joint is stronger than a straight miter. Machining parts with the…

  • Wooden Handscrew Clamps
    Wooden Handscrew Clamps
    148 Review(s)
    $13.69 From: $6.84

    SAVE 50%

    A classic design lets you offset and/or angle the jaws however you need to keep parts from shifting. Eight, ten and twelve-inch clamps available, all featuring solid steel clamping elements and redesigned hardwood handles that accept new comfortable rubber grips (39105, sold separately). * 8"…

  • Workbench Caster Kit 4 Pack
    Workbench Caster Kit 4 Pack
    44 Review(s)
    $79.99 $59.99

    SAVE 25%

    This set of four easy-spin 2-3/8" urethane casters feature a foot-activated lift mechanism that engages or disengages with the touch of your toe. Engage them to lift your bench 3/4" off the floor for mobility, disengage them for stability. Each caster is constructed of durable steel and rated for…

  • Rockler Complete Dovetail Jig
    Rockler Complete Dovetail Jig
    131 Review(s)
    $164.99 $139.99

    SAVE 15%

    Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig! Rockler's exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2" to 3/4"…

  • Today's Woodworker Complete Collection from Woodworker's Journal
    Today's Woodworker Complete Collection from Woodworker's Journal
    1 Review(s)
    $29.99 $14.99

    SAVE 50%

    With this one CD, you get over 200 project plans! (Yes, you read that correctly.) It's a compilation of everything, from projects, to techniques and tips, to wood science, from over nine years' worth of Today's Woodworker magazine (published 1989-1998). Everything, from every issue of the magazine,…

  • Sjobergs Smart Vise
    Sjobergs Smart Vise
    0 Review(s)
    $148.99 $138.99

    Sjoberg's Smart Vise is a portable, practical work-holding solution that brings the versatility of a tail vise to almost any setting. Clamp it to a set of sawhorses, a picnic table, a shop stand - almost any stable surface - and you get an instant woodworking vise, complete with a short row of dog…

  • Plateau Pen and Pencil Hardware Kits-Pen and Pencil Hardware Kits
    Plateau Pen and Pencil Hardware Kits-Pen and Pencil Hardware Kits
    $4.69 From: $1.99

    SAVE 58%

    Gold-plated exterior trim hardware with black accents. Choose from a ballpoint pen or pencil. Each is sold separately.* Ballpoint pen hardware includes double twist mechanism and replaceable cartridge.* Pencil hardware includes .7mm lead dispenser and twist mechanism.* Each hardware kit sold…

  • Norton 5" NorZon® Sanding Discs with Universal Hole Pattern
    Norton 5" NorZon® Sanding Discs with Universal Hole Pattern
    1 Review(s)
    $13.49 $9.99

    SAVE 26%

    Features:* Patented, ceramic alumina abrasive, P-graded* Unique, fiber reinforced backing* Non-pigmented, waterbased zinc stearate (anti-clog), open coat* Patented, universal vac hole pattern* Hook and loop backing Grit Guide:* 60-80 (Coarse) - For moderate removal and leveling surface…

  • Adjustable Lumber Storage Rack
    Adjustable Lumber Storage Rack
    28 Review(s)
    $31.99 $21.99

    SAVE 31%

    Adjustable Lumber Storage Rack includes two heavy-duty 24" steel standards and six sturdy 14" brackets to make three adjustable shelves that support up to 300 lbs. per shelf! It's the perfect lumber rack to keep just above your miter saw for easy access when cutting rippings to length. Fasten it to…

  • Small Piece Holder for Router Tables
    Small Piece Holder for Router Tables
    17 Review(s)
    $25.99 $14.99

    SAVE 42%

    Get an extra margin of safety and control when working with small pieces.* Holds work pieces up to 10" wide and cuts at any angle up to 45&deg.* Ideal for use with table saw or router table.* Features a quick release for extra-fast clamping action.

  • CNC Shark Pro Plus
    CNC Shark Pro Plus
    $3799.99 $3699.99

    With a table measuring 27" x 36", the Shark Pro Plus is ideally suited for carvings and machining operations on a variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can…

  • Excelsior Mini Lathe
    Excelsior Mini Lathe
    46 Review(s)
    $299.99 $249.99

    SAVE 17%

    The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760,…

  • Bark Edge Basswood Blank
    Bark Edge Basswood Blank
    $15.99 $7.99

    SAVE 50%

    The exposed bark on two edges of this small basswood slab provides a simple, rustic charm for clock faces, stools, craft items and carvings. You can use it with or without the bark edge intact. Width will vary from 8'' to 10''. * 8-10''W x 12''L x 1'' thick* Two faces are planed, but not sanded* Kiln-dried

  • Dust Right® Expandable Hose
    Dust Right® Expandable Hose
    92 Review(s)
    $71.99 From: $59.99

    SAVE 17%

    It slinks with ease around shop stands, power tools, and more - and always supplies the right amount of slack. Attach it to your Dust Right® system and dust collector for a premium shop-cleaning setup that won't eat up floor-space! 4" in diameter. Suggested Accessories for Enhanced Dust…

  • Rockler T-Slot Cutter Router Bit
    Rockler T-Slot Cutter Router Bit
    18 Review(s)
    $29.99 $20.99

    SAVE 30%

    T-Slots allow jigs to be moved to any position needed on the track. Cuts slots to fit standard T-Slot Bolts. Instructions:* First cut a 3/8'' groove with a router bit or dado blade.* Repeat the cut with the T-slot bit. Note: This bit does not cut Universal T-Tracks or slotwalls. 3/8" Between Cutter…

  • Items 1 - 24 of 339
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X