Wood Turning

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  • Products (34)
  • Brass Ferrules for Tool Handles, 2-Pack
    Brass Ferrules for Tool Handles, 2-Pack
    3 Review(s)
    $4.49 $1.99

    SAVE 56%

    Metal ferrules both beautify and fortify your custom hand turned tools. Ordinarily, the wood at the juncture between blade and handle is prone to splitting, but the ferrule securely binds the joint, making the tool suitable for the heaviest uses. The bulbous section of the handle near the ferrule…

  • Rockler Pen Press/Drilling Jig
    Rockler Pen Press/Drilling Jig
    40 Review(s)
    $99.99 $69.99

    SAVE 30%

    Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it…

  • Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish
    Rockler Stainless Steel Pizza Cutter Turning Kit, Pewter Finish
    8 Review(s)
    $19.99 $14.99

    SAVE 25%

    Cut any pizza with ease—a must-have for pizza lovers! Robust, well-balanced hardware is 3X the weight of competing cutters and features a sharp 4" diameter stainless steel blade. Just add your own custom handle (not included) to top it to your taste. Kit includes a 5/16" threaded insert that…

  • Nova Chuck Jaw Sets
    Nova Chuck Jaw Sets
    3 Review(s)
    $50.49
    From: $40.99

    SAVE 19%

    Choose the jaw set that best fits the needs of your turning project! Nova jaws boast superb holding power when matched with the appropriate workpiece. They cut into the wood, grip firmly in both contraction and expansion mode and provide high tear out strength. These jaws fit all of the Nova…

  • Full Size Diamond Ergonomic Carbide Turning Tool
    Full Size Diamond Ergonomic Carbide Turning Tool
    4 Review(s)
    $99.99 $69.99

    SAVE 30%

    This Carbide Turning Tool from Rockler features a replaceable, rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter stays sharp for longer…

  • Nova G3 Comet II Reversible Chuck
    Nova G3 Comet II Reversible Chuck
    13 Review(s)
    $179.99 $119.99

    SAVE 33%

    The Nova G3 Comet II Chuck features a locking set screw that allows it to be used safely in reverse mode without the risk of unthreading. It is designed for the Nova Comet II Midi Lathe (46457, sold separately), but can be used on any lathe with a 1" 8-TPI RH thread. When used on non-reversing…

  • Rockler Four-Piece Cheese Knife Turning Kit
    Rockler Four-Piece Cheese Knife Turning Kit
    4 Review(s)
    $39.99 $34.99

    SAVE 13%

    As we all know, one must use the right tool for the job. No sense hacking away at a block of hard cheese with a flimsy knife. Accordingly, the parmesan knife in this set is short, sharp and sturdy to cut through hard cheeses with ease. Use the universal cheese knife to slice through softer cheeses…

  • Nova Chuck Inserts/Adapters
    Nova Chuck Inserts/Adapters
    1 Review(s)
    $25.49 $20.99

    SAVE 18%

    Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading…

  • Nova G3 Insert Chuck
    Nova G3 Insert Chuck
    4 Review(s)
    $167.99 $109.99

    SAVE 35%

    The Nova G3 Chuck is a four-jaw, self-centering scroll chuck for Mini and Midi lathes with up to a 16" swing over the bed. It's an excellent high-powered geared chuck with TuffLock™ grip for incredibly solid, vibration free performance. The single-handed operation means more time turning and…

  • Mini Stainless Steel Bottle Stopper - Droplet
    Mini Stainless Steel Bottle Stopper - Droplet
    5 Review(s)
    $6.99 $4.99

    SAVE 29%

    As in all things culinary, presentation does matter. So when it's time to reopen that day-old bottle, an attractive handturned stopper provides inviting visual appeal. Needless to say, it also locks in freshness to make drinks more appealing to the palate as well. Makes a great gift that will see…

  • Ash Rough Turning Blank - Baseball Bat Blank: Nominal = 2-3/4"+ D by 37" L
    Ash Rough Turning Blank - Baseball Bat Blank: Nominal = 2-3/4"+ D by 37" L
    22 Review(s)
    $19.99 $14.99

    SAVE 25%

    Turn your own custom baseball bat! Put one of these cylindrical blanks on your lathe and fashion a bat with the length, weight, and shape of your choosing. Also great for any other furniture project or use for custom Pepper mills. These are both economy grade material with some minor imperfections.

  • Nova Mini Cole Jaw Set
    Nova Mini Cole Jaw Set
    2 Review(s)
    $73.99 $59.99

    SAVE 19%

    The Nova Mini Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. Mini Cole Jaws are suitable for lathes with a minimum 8"/203mm swing diameter. Other Nova jaw sets (sold separately) can be…

  • Nova Cole Jaw Set
    Nova Cole Jaw Set
    3 Review(s)
    $93.99 $65.99

    SAVE 30%

    The Nova Standard Cole Jaws are designed for re-chucking bowls with the bottom side exposed in order to remove chuck marks, add decoration or to re-shape the bottom of the bowl. They are suitable for lathes with a minimum 12"/300mm swing diameter. Other Nova jaw sets (sold separately) can be fitted…

  • Turning Assortment, 4-Pack of 2" x 2" x 12" Blanks
    Turning Assortment, 4-Pack of 2" x 2" x 12" Blanks
    3 Review(s)
    $29.99 $19.99

    SAVE 33%

    In addition to the two classic domestic species—maple and cherry—this assortment also includes two exotic species: African mahogany and African padauk. African Mahogany is strong, yet light, and turns beautifully. The color matures from a salmon tone when freshly cut, into a rich red or…

  • Nova Precision Midi 1" 8-TPI Direct Thread Chuck
    Nova Precision Midi 1" 8-TPI Direct Thread Chuck
    12 Review(s)
    $130.99 $99.99

    SAVE 24%

    The Nova Precision Midi Direct Thread Chuck is the smallest chuck in the Nova lineup—ideal for lathes with up to a 12" swing over the bed. Its small size minimizes the load on small spindles and bearings, yet is extremely accurate, and built to the same exacting standards as the…

  • Nova Soft Jaw Set
    Nova Soft Jaw Set
    1 Review(s)
    $21.49 $17.99

    SAVE 16%

    Nova Soft Jaws consist of four segments of high-quality soft nylon, which can be cut and customized by the user to their specific requirements. Simply turn them with a scraper to the required dimensions. This allows woodturners to make a special set of non-marring jaws for unique projects. It also…

  • Nova SuperNova 2 Insert Chuck
    Nova SuperNova 2 Insert Chuck
    $223.99 $149.99

    SAVE 33%

    The SuperNova 2 is a solid, powerful chuck, perfect for use on lathes with up to a 20" swing. It's an excellent, all-purpose geared chuck, suitable for a majority of users, and is packed with exciting, innovative features such as a fully sealed composite indexing backing plate and copper - infused…

  • 5-Pack Cocobolo Pen Blanks
    5-Pack Cocobolo Pen Blanks
    $19.99 $9.99

    SAVE 50%

    Long prized by woodworkers for its spectacular grain and color, cocobolo is a favorite for pen turning where its grain and fine texture can be appreciated, and its cost is less of an issue. Cocobolo can exhibit colors ranging the spectrum, from yellow, orange and red to shades of brown with streaks…

  • Stainless Steel Turning Insert
    Stainless Steel Turning Insert
    3 Review(s)
    $6.99 $4.99

    SAVE 29%

    Whether it ends up holding your morning coffee or a fresh bouquet of flowers, this Stainless Steel Insert is a great way to show off your turning skills, as well as that chunk of prized figured wood you've been saving. It's an ideal project for mid-level to experienced turners, and will help hone…

  • Nova Pen Plus Jaws
    Nova Pen Plus Jaws
    12 Review(s)
    $44.99 $36.99

    SAVE 18%

    Nova's Pen Plus Jaws quickly convert your Nova chuck into a fast, accurate pen blank drilling tool. The large jaw profile provides a solid grip for all sizes of pen blanks, and a perfectly centered hole, every time. Being able to finely control the drill feed on your lathe helps to prevent break…

  • Carter Hollow Roller™ Mounting Stud 1000-45
    Carter Hollow Roller™ Mounting Stud 1000-45
    $29.99 $22.49

    SAVE 25%

    Adapt your lathe to use the Carter Hollow Roller™ Vessel Turning System using this easily installed Mounting Stud! Works with Delta 46-700/701, General 260, Jet 1236, Jet 1442, Jet 1642, Nova 1500, Nova 3000, Oneway 1224, Oneway 1640 and most lathes with a 1" tool rest post. Includes a second…

  • Nova Simple Live Center
    Nova Simple Live Center
    2 Review(s)
    $24.49 $20.99

    SAVE 14%

    This is the standard live center included with all Nova lathes—use as a replacement or as an upgrade for another lathe. With heavy-duty sealed bearings, precisely machined medium tensile carbon steel construction, and a solid steel point to dig into the wood blank, the center provides a long…

  • Carter Hollow Roller™ Mounting Stud 1125-45
    Carter Hollow Roller™ Mounting Stud 1125-45
    $24.99 $18.74

    SAVE 25%

    Adapt your lathe to use the Carter Hollow Roller™ Vessel Turning System using this easily installed Mounting Stud! Works with Powermatic 45 & 90 lathes and most lathes with a 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest. Technical Details:* Adapts your…

  • Nova Cole Jaw Buffers
    Nova Cole Jaw Buffers
    1 Review(s)
    $29.99 $20.99

    SAVE 30%

    Nova Cole Jaw Buffers are an accessory for the Nova Cole Jaws and Nova Mini Cole Jaws (45174 and 45274, sold separately). The buffers are designed to safely and securely hold your turned edge bowls and large diameter cylinders so you can make the finishing cuts to the bottom side. The kit includes…

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X