Overview
Get easy installation and squeak-free operation with these 3-knuckle non-mortise hinges. No mortising is required simply screw on! The design of this hinge even helps reduce the gap between cabinets by 1/4". The screw holes are "star punched" and counter sunk to eliminate distortion in leaves. Teflon-coated pins make for smooth and quiet movement.
Features:
- Easy installation and squeak-free operation.
- No mortising is required simply screw on.
- Helps reduce the gap between cabinets by 1/4"
- Screw holes are "star punched" and counter sunk to eliminate distortion in leaves
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 11 answers
Why did you choose this?
Rockler Store
Easy to install
Randall M
on Feb 27, 2018
fits door for project.
Thomas A P
on May 2, 2017
Easy to install
Randall M
on Feb 27, 2018
needed for a project I am working on
Mike
on Aug 12, 2017
How many of these hinges would I need for an 80 lb. door?
BEST ANSWER: I would use no less than four (4) on an 80 lb. door.
- Reply
- Inaccurate
- Jeff T on Aug 1, 2016
- Purchased on May 11, 2015
Being 270 degree do they work like a wrap around hinge? If I put on interior wooden shutters will they lie flat against wall when opened?
BEST ANSWER: They should. Will have to mount them to the window liner (like the side of a cabinet).
- Reply
- Inaccurate
- Jared H on Apr 20, 2016
- Purchased on Aug 7, 2014
can you mount this hinge on1/2" plywood frame?
BEST ANSWER: It would work but the hinge would extend beyond the width of the cabinet by about 1/4" and the doors would need to be made wider or there would be a near 1/2" gap between them (assuming double doors) or 1/4" short of covering the opposite side.
- Reply
- Inaccurate
- Brian T on Feb 18, 2016
- Purchased on Dec 21, 2014
Do you have this type of hinge with a 1/4" overla?
BEST ANSWER: if rockler doesn't carry it you can check on the Internet for our PC hinges they manufacture pretty much every deviant of this hinge and they have a economy line also.
- Reply
- Inaccurate
- Gay C on Dec 15, 2017
- Purchased on Feb 6, 2016
can I mount this hinge on a 5/8" shutter?
Reviews
4.6 / 5.0
14 Reviews
The two hinges I received were exactly the design hinges I needed but they were about six to eight times the size I needed. My repair man ordered them but failed to make certain they were the correct size. We will probably keep them for some future project.
Good quality hinges received
Prompt shipment
Well packaged
Thanks,
Glenn N. Downes
Good quality hinges received
Prompt shipment
Well packaged
Thanks,
Glenn N. Downes
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Outstanding
Worked perfectly, would recommend your products to everyone.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Replacements
They were the perfect replacement for old hand made hinges that were originally on my wardrobes.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
the right hinge
After trial and error I found the right non-mortise hinge to fix the door on my cabinet. the staff at Rockler went above and beyond to help me. They made it easy to return the hinge that did not work and spent time on the phone discussing what I needed. Because of them my problem was solved. They could not have been more helpful. Thank you.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great hinge for storage cabinets
I used 18 of these (three on each door) on three 7' tall double door cabinets. They are sturdy and look nice. The total width is 11' with two 4' cabinets and one 3' cabinet. They are in a subteranian parking garage so I needed hinges with a fixed pin and inaccessible screws for security. The powder oat finish should keep them looking good for years to come.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
solid, industrial hinge
We use them as replacemnt hinges on laptop carts at our Middle School. A solid, rugged, industial hinge. Nothing to look at, but well built
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
These are very heavy duty and...
These are very heavy duty and the finish looks great. I will definitely buy these again.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
November 22, 2012
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
This is or was a great...
This is or was a great hinge. I bought a bunch of these a few years back for my shop cabinets. They look good, work well, and I've had no issues with them at all. Now for the down side. When I bought them they came in Black, White, and Chrome. I need to get some more but no longer have the Black or White ones, pretty dissapointed with this. "Chrome" really isn't going to work well with the cabinets I'm building so I'm looking elsewhere.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
July 3, 2012
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great Hinge. Easy to install. Will...
Great Hinge. Easy to install. Will definitely design more projects using these.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
December 4, 2010
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
A 270 degree hinge. These are...
A 270 degree hinge. These are perfect for a 3/4 inch plywood cabinet door. Heavy duty. Worth the price.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
June 21, 2009
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
