Oneway Talon Chuck System  Zoom

Oneway Talon Chuck System

Item #: 20761
$213.50
Each In Stock
Perfect for mini and mid-size lathes.

Overview

This is an ideal chuck for owners of mini and mid-size lathes who want a power-grip, key-operated chuck. It's perfect for lathes with a 16" swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. The nickel-plated body of the Talon Chuck is 3-1/2'' in diameter, and it comes with standard #2 jaws (internal chucking capacity of 2" to 3-1/2" and external capacity of 1-5/8" to 2-7/8").

Requires one of the three inserts listed below (sold separately) for mounting on the lathe. The insert must fit the lathe's drive spindle.

  • 3/4" x 16 tpi Insert (22733)
  • 1" x 8 tpi Insert (22726)
  • 1-1/4" x 8 tpi Insert (21358)

The following additional jaws (listed with chucking capacities) are compatible with the Talon Chuck and can be purchased separately.

#1 Jaws (22740)

  • External (compression): 3/8" minimum, 1-3/4" maximum
  • Internal (expansion): 7/8" minimum, 2-3/8" maximum

#3 Jaws (22747)

  • External (compression): 2-7/8" minimum, 4" maximum
  • Internal (expansion): 3-3/8" minimum, 4-5/8" maximum

Mini Jumbo Jaws (22761)

  • External (compression): 2" minimum, 8-1/8" maximum
  • Internal (expansion): 4" minimum, 10-1/8" maximum

Jumbo Jaws (22754)

  • External (compression): 2-7/8" minimum, 11" maximum
  • Internal (expansion): 4-7/8" minimum, 12" maximum

Tech Spec

Brand Oneway
Manufacturer Part Number 2985
Weight (lbs) 3.8500

Reviews

Customer Reviews

6 Review(s)

View All

I'm in love. I've had a...

Terry E from Fort Dodge, Iowa Posted February 19, 2010
I'm in love. I've had a 3-tier candy dish project on the back burner for months now because finishing it with my old setup was to difficult. I purchased the One Way Talon chuck a week ago and finished the project in less then two days. And all becasue of the One Way Talon chuck. With a simple adapter, i finished the platters then installed a square spindle and turned it down. Although i've only done one project with the incredible One Way Talon chuck, I'm looking for more! My lathe has sat rarely used in the corner of my shop. Now it'll see lots of use.

There is little to add to...

Joe B from Fort Worth, TX Posted February 18, 2010
There is little to add to the other review. The Oneway Talon is one of those products that is a genuine pleasure to use, every time.

I purchased my OneWay chuck some...

Charles B from New Albany, MS Posted May 10, 2009
I purchased my OneWay chuck some 4 or 5 years ago and it is as reliable as they come. It holds strongly and centers as well as any I have ever used, either in woodworking or in metalworking. I highly recommend this chuck and am about to order more jaws to increase the capacity of the work I can do with my chuck. Thank you Rockler for your supply of quality tools.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • NewWoodworker Presents: Candy Dish Video Tutor
  • NewWoodworker Presents: Yarn Bowl Project (Excelsior Mini Lathe & Oneway Talon Chuck)
  • Oneway Talon Chuck System Review

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X