Inlay blank shown with sample finished pen (pen kit not included)  Zoom

Pink Ribbon Laser-Cut Inlay Pen Kit Blank

Item #: 23210
$21.99
Each In Stock

Overview

Inlay blank comes pre-assembled with laser cut pink ribbon component so all you have to do is make sure everything is aligned well and then flood with CA glue. Once cured,secure the barrel to the brass tube with two-part epoxy. Sand the ends flush with the brass tube and mount on your lathe for turning and finishing. Designed for Manhattan Chrome, Manhattan Gold, and Elegant Manhattan style pen kits only, sold separately. For easy-to-follow directions (including color photos) on applying the CA finish to your pen kit, see the article "My Simple CA Finish" by Colin Nelson.

Features:

Fits Manhattan Pen Hardware Kits (Sold Separately)
Difficulty Level (1 Easy - 5 Hard): 1

Tech Spec

Manufacturer Part Number PINK RIBBON SIERRA
Weight (lbs) 0.0500
Style Other

What's included:

(1) Pink Ribbon Laser-Cut Inlay Pen Kit
(1) Set of instructions

Technical Downloads:

Reviews

Customer Reviews

3 Review(s)

View All

This makes a very nice pen,...

RAYMOND M from Bethany, OK Posted January 1, 2011
This makes a very nice pen, however it is not much of a challenge since the pen is already assembled.

This is the best of the...

John W from Maryville, TN Posted July 28, 2010
This is the best of the inlay kits I have tried, but still somewhat disappointing. The Sierra kits are not the best, but adequate. I will probably try a few more and see if it is really the kit or me.

This kit is nice. The directions...

John E from Meridian, ID Posted April 19, 2010
This kit is nice. The directions are a little incomplete. You glue the pieces togeather with CA glue and then epoxy. (I used fast drying Gorilla, works fine, just make sure your glue the pieces in with more than one coating of CA to cover all the holes. You don't want the urathane seeping through. Sometimes the inlay pieces sink in so deep they obstruct the insertion of the tube. Trimming the ends is impossible w/ a barrel trimmer, they have to be sanded. The Sierra Ballpoint kits suck. They'd be fine if they could include a rollerball with them, but I personnally hate ballpoints. I don't think they're worth the cost.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X