CNC Machine Accessories

  1. 1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits
    $6.99
  2. Controller Bracket for CNC Shark
    Exclusive
    $19.99
  3. Replacement Silicone Mat for Click-N-Carve CNCs
    Exclusive
    $29.99
  4. Pre-Filters for F1020PG Air Purifier, 5-Pack
    New
    Pre-Filters for F1020PG Air Purifier, 5-Pack
    A 5-pack of replacement pre-filters to fit the F1020PG Air Purifier (#55155, sold separately).
    $31.99
  5. Piranha Fx Conversion Kit
    New
    Piranha Fx® Conversion Kit
    Converts older CNC Piranha units to a CNC Piranha Fx®, capable of accepting peripherals such as the Laser Module and 3D Printer Module (sold separately).
    $39.99
  6. Rockler Roundover Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank
    Rockler Roundover Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank
    Mounted in your CNC router, this bit dimensions your parts and applies an edge profile at the same time!
    $47.99
  7. Rockler Cove Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank
    Rockler Cove Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank
    Mounted in your CNC router, this bit dimensions your parts and applies an edge profile at the same time!
    $51.99
  8. Rockler Chamfer Edging/Dimensioning CNC Router Bit - 45° x 1" Dia x 1" H x 1/2" Shank
    Rockler Chamfer Edging/Dimensioning CNC Router Bit - 45° x 1" Dia x 1" H x 1/2" Shank
    Mounted in your CNC router, this bit dimensions your parts and applies an edge profile at the same time!
    $51.99
  9. White acrylic for the finest detail.
    Exclusive
    White Acrylic Sheets, 11.8" x 7.9" x 0.12", 7-Pack
    A 7 pack of White Acrylic Sheets measuring 11.8" x 7.9" x 0.12".
    $69.99
  10. 4th Axis Control Board for CNC Shark
    4th Axis Control Board for CNC Shark
    Required control board for using the 4th Axis attachment on your CNC Shark.
    $89.00
  11. CNC Dust Boot is easy to take off and reinstall when you need more visibility of the bit area.
    $89.99
  12. Dust Boot for CNC Shark For Slimline, Extended Bed and HD3
    $89.99
  13. 43803 - CNC Shark Touch Plate
    CNC Shark Touch Plate
    10 Review(s)
    $89.99
  14. Dust Boot for Piranha Fx®
    Dust Boot for Piranha Fx®
    Attaches to your Piranha Fx to eliminate dust right at the source—flexible brushes allow air flow, but conform to your workpiece to minimize airborne dust.
    $89.99
  15. Refill the bulk carbon in your F1020PG Air Purifier (#55155, sold separately) to eliminate odors and harmful gases.
    New
    Bulk Carbon Refill for F1020PG Air Purifier
    Refill the bulk carbon in your F1020PG Air Purifier (#55155, sold separately) to eliminate odors and harmful gases.
    $115.99
  16. Step-Up/Step-Down Voltage Transformer, 110/120 to 220/240V
    New
    Step-Up/Step-Down Voltage Transformer, 110/120 to 220/240V
    Allows you to use 220V power tools, such as the Axiom Autoroute Pro line of CNC routers.
    $139.00
  17. 4'' Connection Hose for F1020PG Air Purifier
    New
    4'' Connection Hose for F1020PG Air Purifier
    Designed to safely exhaust the fumes from your laser to your F1020PG Air Purifier (#55155, sold separately).
    $144.99
  18. PhotoVCarve Software for CNC
    PhotoVCarve Software for CNC
    Instantly converts photographs and images into toolpaths that can be run on virtually any CNC routing and engraving machine.
    $149.00
  19. Dust Shoe for Axiom Basic CNC
    Dust Shoe for Axiom Basic CNC
    Attaches to your Axiom AutoRoute 4 Basic CNC router for an easy, effective dust collection solution.
    $159.00
  20. Dust Shoe for Axiom Pro CNC
    Dust Shoe for Axiom Pro CNC
    Attaches to Axiom AutoRoute Pro 4, 6 and 8 CNC routers for an easy, effective dust collection solution.
    $159.00
  21. Dust Shoe for Axiom AutoRoute 1 Basic CNC
    Dust Shoe for Axiom AutoRoute 1 Basic CNC
    Provides an effective dust extraction solution for your Axiom AutoRoute 1 Basic CNC machine (#58615, sold separately).
    $159.00
  22. Rockler 5-Piece CNC Router Bit Set
    $199.99
  23. Rockler CNC Table
    Exclusive
    Rockler CNC Table
    2 Review(s)
    With its spacious top, and included controller storage, this table serves nicely as mission control for all things CNC.
    $249.99
  24. Simply program the Shark to operate at the same detail level as the Touch Probe scan to reproduce the object.
    CNC Shark® Touch Probe
    9 Review(s)
    An ideal solution for replicating detail and objects with your CNC Machine.
    $299.99

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.
Feedback X