Router Bits

  1.  Cut a huge variety of dovetails � ideal for use with our Distinctive Series Dovetail Templates.
    Distinctive Series Dovetail Router Bits, 8mm Shank
    2 Review(s)

    8° dovetail angle mimics the look of genuine hand-cut dovetails.

    Starting at: From $17.99

  2. 22627-1-3/4' Dia. X 3/4' High x 1/2' Shank 45 Degree Lock Miter Router Bit
    Sale
    45° Lock Miter Router Bit -1/2'' Shank
    20 Review(s)
    Cuts strong, fast miter joints for drawer boxes and cabinet cases.

    Regular Price: $57.99

    Special Price $39.99

  3. Rockler Classical Roman Ogee Plunge Bits
    Rockler Classical Roman Ogee Plunge Bits
    1 Review(s)
    This decorative plunge bit is often used to create a faux panel door effect in slab door and drawer fronts.

    Starting at: From $23.99

  4. 21515 and 38973 Raised Panel Router Bit - Straight  Horizontal Bit
    Raised Panel Router Bit - Straight - Horizontal
    4 Review(s)
    Horizontal panel-raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  5. Rockler Drawer Lock Router Bit
    Sale
    Rockler Drawer Lock Router Bit
    18 Review(s)
    Rout strong, precise corner joints for drawer boxes with just one bit!

    Regular Price: $37.99

    Special Price $26.59

  6. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  7. Traditional Stile and Rail Router Bit Set
    Traditional Stile and Rail Router Bit Set
    4 Review(s)
    Build sturdy, beautiful frame and panel doors with minimal setup and absolute precision!
  8. 3/8" Signmaking Carbide Router Bit, 1/4" Shank
  9. Shutter Louver Router Bits
    Shutter Louver Router Bits
    This unique router bit is specifically designed to quickly machine the slats for louvered shutters.

    Starting at: From $41.99

  10. Includes one arbor, two 22mm bearings, and two cutters. Make a Groove bit (shown) or a Tongue bit by attaching the second cutter.
    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank
    10 Review(s)
    Convertible arbor can be configured to cut both the tongue and groove for 3/4" stock.
  11. Rockler Keyhole Slot Router Bits
    Rockler Keyhole Slot Router Bits
    7 Review(s)
    This twin-flute cutter captures a screw head for fastening wall hung items. Also used for knock-down furniture.

    Starting at: From $14.99

  12. Undersized Plywood Router Bit Set
    New
    Undersized Plywood Router Bit Set
    10 Review(s)
    Specially designed to cut perfect-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.
  13. Shutter Bead Router Bit
    Shutter Bead Router Bit
    Adds a subtle decorative touch to the rails and stiles of your custom shutters.
  14. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  15. Rockler 3-Pc. Signmaking Router Bit Set
    Rockler 3-Pc. Signmaking Router Bit Set
    2 Review(s)
    Three of our most popular signmaking bits in one convenient set!
  16. 1/2'' Pattern Router Bit
    1/2'' Pattern Router Bit
    5 Review(s)
    A bearing-guided pattern bit for routing dadoes and hinge mortises with absolute precision and repeatability.
  17. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  18. Core Box Router Bits-1/2"  Shank
    Core Box Router Bits-1/2" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $23.99

  19. Undersized Router Bits-1/2 Inch  Shank
    Undersized Router Bits-1/2 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  20. Pattern Flush Trim Router Bit- 1/2 Inch Shank
    Pattern Flush Trim Router Bit- 1/2 Inch Shank
    21 Review(s)
    Fast, smooth flush-cutting capabilities.

    Starting at: From $26.99

  21. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  22. 5/8" Signmaking Carbide Router Bit, 1/4" Shank
  23. Rabbeting Router Bit
    Sale
    Rabbeting Router Bit
    15 Review(s)
    Includes a set of four bearings to achieve the following cutting depths: 5/16", 3/8", 7/16" and 1/2".

    Regular Price: $39.99

    Special Price $27.99

  24. Rockler 4-Pc. Straight Bit Set
    Rockler 4-Pc. Straight Bit Set
    5 Review(s)
    Includes four of the most popular straight bit sizes for dados, grooves and rabbets.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X