Router Bits

  1. Rockler Keyhole Slot Router Bits
    Rockler Keyhole Slot Router Bits
    7 Review(s)
    This twin-flute cutter captures a screw head for fastening wall hung items. Also used for knock-down furniture.

    Starting at: From $14.99

  2. 3/8" Signmaking Carbide Router Bit, 1/4" Shank
  3. 1/2'' Pattern Router Bit
    1/2'' Pattern Router Bit
    5 Review(s)
    A bearing-guided pattern bit for routing dadoes and hinge mortises with absolute precision and repeatability.
  4. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  5. 5/8" Signmaking Carbide Router Bit, 1/4" Shank
  6. Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)
    Sale

    Regular Price: $21.99

    Special Price $15.39

  7. Undersized Plywood Router Bit Set
    New
    Undersized Plywood Router Bit Set
    10 Review(s)
    Specially designed to cut perfect-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.
  8. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  9. 2 Flute Trim Router Bit
    Piloted Flush Trim Bits 1/4" Shank
    Use these bits to trim veneers and solid stock flush with the underlying substrate.

    Starting at: From $15.99

  10. Core Box Router Bits-1/4"  Shank
    Core Box Router Bits-1/4" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $17.99

  11. 14° Dovetail Pattern Router Bit
    14° Dovetail Pattern Router Bit
    3 Review(s)
    A dovetail bit with an integral guide bearing for extra-smooth cutting when used with dovetail jigs.
  12. 1/8'' Miniature Roundover Router Bit
    1/8'' Miniature Roundover Router Bit
    2 Review(s)
    Specifically sized for smaller pieces, such as jewelry boxes, music boxes and more.
  13. Rockler 3-Pc. Signmaking Router Bit Set
    Rockler 3-Pc. Signmaking Router Bit Set
    2 Review(s)
    Three of our most popular signmaking bits in one convenient set!
  14. 1/8'' Double Flute Straight Bit
    Sale
    1/8'' Double Flute Straight Bit
    2 Review(s)
    If you're looking for a workhorse router bit for your workshop, look no further than this 1/8" Double Flute Straight Bit!

    Regular Price: $20.99

    Special Price $14.69

  15. Undersized Router Bits-1/4 Inch  Shank
    Undersized Router Bits-1/4 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  16. V-Groove Router Bits-1/4 Inch Shank
    V-Groove Router Bits-1/4 Inch Shank
    2 Review(s)
    Cuts a V-shaped groove that's ideal for sign text, fluted columns and other decorative effects.

    Starting at: From $19.99

  17. Biscuit Cutter Set
    Biscuit Cutter Set
    6 Review(s)
    Lets you cut clean, accurate biscuit slots with an ordinary router!
  18. 1'' Dish Carving Router Bit, 1/4" Shank
    1'' Dish Carving Router Bit, 1/4" Shank
    3 Review(s)
    Rout wide flat-bottomed recesses with a practical and attractive radius at the bottom corner.
  19. Includes one arbor, two 22mm bearings, and two cutters. Make a Groove bit (shown) or a Tongue bit by attaching the second cutter.
    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank
    10 Review(s)
    Convertible arbor can be configured to cut both the tongue and groove for 3/4" stock.
  20. Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $24.99

  21. 3 Wing Slotting Cutters - Router Bits-1/4" Shank
    3 Wing Slotting Cutters - Router Bits-1/4" Shank
    15 Review(s)
    Cuts slots and grooves of varying widths—ideal for frame and panel doors and other joinery applications.

    Starting at: From $35.99

  22. 4-Piece Straight Bit Set - 1/4" Shank
    4-Piece Straight Bit Set - 1/4" Shank
    A perfect beginner set for cutting grooves, dados and rabbets—includes four of the most common sizes.
  23. Specialty Molding Router Bit for Decorative Edges

    Starting at: From $37.99

  24. Dovetail Router Bits-1/4" Shank
    Dovetail Router Bits-1/4" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $13.99

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X