Router Bits

  1. Freud Quadra-Cut Beading Bit
    Freud Quadra-Cut Beading Bit
    3 Review(s)
    Two primary cutters shear upward for a smooth finish, while two smaller cutters shear downward to eliminate splintering on the face.
  2. Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/2" Shank)
    Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/2" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  3. 1-1/16" Diameter X 3/4" High Drawer Lock Bit
    1-1/16" Diameter X 3/4" High Drawer Lock Bit
    5 Review(s)
    Increases gluing surface and provides a strong, mechanical locking action for drawer box corner joints.
  4. Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/4" Shank)
    Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/4" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  5. 1-1/16" Diameter X 3/4" High Drawer Lock Bit
    1-1/16" Diameter X 3/4" High Drawer Lock Bit
    5 Review(s)
    Increases gluing surface and provides a strong, mechanical locking action for drawer box corner joints.
  6. 2-1/2'' Table Top Edge Bit, 1/2'' Shank
    2-1/2'' Table Top Edge Bit, 1/2'' Shank
    1 Review(s)
    Offers a deep, handsome profile ideally sized for table and cabinet tops.
  7. Classic Roman Ogee Router Bits-1/4" Shank
    Classic Roman Ogee Router Bits-1/4" Shank
    2 Review(s)
    With its corresponding bead and cove, this profile embodies the meaning of classical design.

    Starting at: From $39.99

  8. Rockler Restoration Beading Router Bits, 1/2" Shank
    Rockler Restoration Beading Router Bits, 1/2" Shank
    2 Review(s)
    These beading bits feature a smooth half-round profile—perfect for beaded moldings and for bull-nosed edges.

    Starting at: From $26.99

  9. Classic Roman Ogee Router Bits-1/2" Shank
    Classic Roman Ogee Router Bits-1/2" Shank
    2 Review(s)
    Corresponding bead and cove provides a pleasing balance that's suitable for a wide variety of edge treatments.

    Starting at: From $39.99

  10. Ogee Base Molding Bit
    Ogee Base Molding Bit
    Ideal for profiling the top edge of base moldings, as well as for table tops and other decorative edges.
  11. Rockler Table Top Edge Bit
    Rockler Table Top Edge Bit
    Cuts in a full 1" from the edge, offering a generous profile for table edges and moldings.
  12. Bead In-Stile and Rail Router Bit Set
    Bead In-Stile and Rail Router Bit Set
    Rout tight-fitting joints for beautiful frame and panel doors.
  13. Hinge Mortising Router Bit 3/4" Diameter x 3/4" Height (1/2" Shank)
    Hinge Mortising Router Bit 3/4" Diameter x 3/4" Height (1/2" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  14. Undersized Router Bits-1/4 Inch  Shank
    Undersized Router Bits-1/4 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  15. Freud 13 Piece Super Bit Set
    Freud 13 Piece Super Bit Set
    2 Review(s)
    Offers a wide variety of router bits, including "V" groove, flush trim, chamfer and dovetail bits.
  16. Freud Rabbeting Bits With Bearings
    Freud Rabbeting Bits With Bearings
    2 Review(s)
    Includes multiple bearings for a range of rabbeting depths.

    Starting at: From $42.47

  17. Horizontal Raised Panel Router Bits
    Raised Panel Router Bit - Ogee - Horizontal
    2 Review(s)
    Horizontal panel raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  18. Edge Beading Router Bits-1/2" Shank
    Edge Beading Router Bits-1/2" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $23.99

  19. 7° Dovetail Jig Router Bit for Porter- Cable 4210 and 4212 Dovetail Jigs
    7° Dovetail Jig Router Bit for Porter- Cable 4210 and 4212 Dovetail Jigs
    3 Review(s)
    The perfect high-quality replacement bit for Porter-Cable 4210 and 4212 dovetail jigs.
  20. Rockler 3-Pc. Roundover/Beading Bit Set
    Rockler 3-Pc. Roundover/Beading Bit Set
    4 Review(s)
    Three of our most popular round over bits—all convertible to beading bits with the included 3/8" bearings.
  21. Cove Router Bits-1/2 Inch Shank
    Cove Router Bits-1/2 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $25.99

  22. Freud Round Nose Bits-Optional Sizes
    Freud Round Nose Bits-Optional Sizes
    2 Review(s)
    Ideal for fluted columns, finger pulls and sign lettering.

    Starting at: From $19.97

  23. Flooring Router Bit Set, Nail Slot
    Flooring Router Bit Set, Nail Slot
    Mill your own hardwood flooring with this specially-designed tongue and groove bit set.
  24. 40362   3/4' Edge V-Groove Bit, 1/2' Shank (Convex) and 40368   3/4' Edge V-Groove Bit, 1/2' Shank (Concave)
    Edge V-Groove Bit, 1/2" Shank
    1 Review(s)
    Interlocking profiles self-align and increase available gluing surface, making them ideal for edge joining boards.

    Starting at: From $39.99

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X