Router Bits

  1. 1'' Dish Carving Router Bit, 1/4" Shank
    1'' Dish Carving Router Bit, 1/4" Shank
    3 Review(s)
    Rout wide flat-bottomed recesses with a practical and attractive radius at the bottom corner.
  2. 1-1/16" Diameter X 3/4" High Drawer Lock Bit
    1-1/16" Diameter X 3/4" High Drawer Lock Bit
    5 Review(s)
    Increases gluing surface and provides a strong, mechanical locking action for drawer box corner joints.
  3. 1/2'' Pattern Router Bit
    1/2'' Pattern Router Bit
    5 Review(s)
    A bearing-guided pattern bit for routing dadoes and hinge mortises with absolute precision and repeatability.
  4. 1/4" Shank Rabbeting Bit Set
    1/4" Shank Rabbeting Bit Set
    Includes a set of four bearings to achieve the following cutting depths: 5/16", 3/8", 7/16" and 1/2".
  5. 1/4''Miniature Roundover Router Bit
    1/4''Miniature Roundover Router Bit
    Miniature 8mm bearing allows you to get deeper into the corners of small scale projects, minimizing hand work.
  6. 1/8'' Double Flute Straight Bit
    Sale
    1/8'' Double Flute Straight Bit
    2 Review(s)
    If you're looking for a workhorse router bit for your workshop, look no further than this 1/8" Double Flute Straight Bit!

    Regular Price: $20.99

    Special Price $14.69

  7. 1/8'' Miniature Roundover Router Bit
    1/8'' Miniature Roundover Router Bit
    2 Review(s)
    Specifically sized for smaller pieces, such as jewelry boxes, music boxes and more.
  8. 14° Dovetail Pattern Router Bit
    14° Dovetail Pattern Router Bit
    3 Review(s)
    A dovetail bit with an integral guide bearing for extra-smooth cutting when used with dovetail jigs.
  9. 3 Wing Slotting Cutters - Router Bits-1/4" Shank
    3 Wing Slotting Cutters - Router Bits-1/4" Shank
    15 Review(s)
    Cuts slots and grooves of varying widths—ideal for frame and panel doors and other joinery applications.

    Starting at: From $35.99

  10. 3/4" Diameter X 1" High Molding Bit
    3/4" Diameter X 1" High Molding Bit
    1 Review(s)
    Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails.
  11. 3/8" Signmaking Carbide Router Bit, 1/4" Shank
  12. 4-Piece Straight Bit Set - 1/4" Shank
    4-Piece Straight Bit Set - 1/4" Shank
    A perfect beginner set for cutting grooves, dados and rabbets—includes four of the most common sizes.
  13. 5/8" Signmaking Carbide Router Bit, 1/4" Shank
  14. Back Cutter Router Bit
    Back Cutter Router Bit
    Makes a relief cut on the back side of a flat or raised panel so it fits into the groove of your door frame.
  15. Biscuit Cutter Set
    Biscuit Cutter Set
    6 Review(s)
    Lets you cut clean, accurate biscuit slots with an ordinary router!
  16. Classic Fluted Plunge Router Bit, 2 sizes
    Classic Fluted Plunge Router Bit, 2 sizes
    3 Review(s)
    Can be used for template routing in the middle of a workpiece, or mounted in a table for edge treatments.

    Starting at: From $37.99

  17. Classic Ogee Router Bit, 1/4" Shank
    Classic Ogee Router Bit, 1/4" Shank
    A lower round over paired with an upper cove to form a classic ogee edge profile.
  18. Classic Roman Ogee Router Bits-1/4" Shank
    Classic Roman Ogee Router Bits-1/4" Shank
    2 Review(s)
    With its corresponding bead and cove, this profile embodies the meaning of classical design.

    Starting at: From $39.99

  19. Core Box Router Bits-1/4"  Shank
    Core Box Router Bits-1/4" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $17.99

  20. Cove Router Bits-1/4 Inch Shank
    Cove Router Bits-1/4 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $24.99

  21. Dovetail Router Bits-1/4" Shank
    Dovetail Router Bits-1/4" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $13.99

  22. Edge Beading Router Bit-1/4" Shank
    Edge Beading Router Bit-1/4" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $34.99

  23. Freud # 99-472 Beadboard Bit System
    Freud # 99-472 Beadboard Bit System
    Use these two bits to create handsome beaded tongue and groove paneling in stock from 3/8" to 3/4" thick.

    Starting at: From $18.97

  24. Freud 5-Piece Up Cut Spiral Router Bit Set
    Freud 5-Piece Up Cut Spiral Router Bit Set
    This incredible value packs five solid carbide up-cut spiral router bits into one neat wooden case: 3/16", 1/4", 5/16", 3/8" and 1/2".

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X