Router Bits

  1. Dovetail Router Bits-1/4" Shank
    Dovetail Router Bits-1/4" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $13.99

  2. Dovetail Router Bits-1/2" Shank
    Dovetail Router Bits-1/2" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $14.99

  3. Rockler Keyhole Slot Router Bits
    Rockler Keyhole Slot Router Bits
    7 Review(s)
    This twin-flute cutter captures a screw head for fastening wall hung items. Also used for knock-down furniture.

    Starting at: From $14.99

  4. Core Box Router Bits-1/4"  Shank
    Core Box Router Bits-1/4" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $17.99

  5.  Cut a huge variety of dovetails � ideal for use with our Distinctive Series Dovetail Templates.
    Distinctive Series Dovetail Router Bits, 8mm Shank
    2 Review(s)

    8° dovetail angle mimics the look of genuine hand-cut dovetails.

    Starting at: From $17.99

  6. Freud Mortising Bits
    Freud Mortising Bits
    2 Review(s)
    Down shear angle helps to eliminate splintering around the perimeter of the mortise.

    Starting at: From $18.47

  7. Freud Round Nose Bits-Optional Sizes
    Freud Round Nose Bits-Optional Sizes
    2 Review(s)
    Ideal for fluted columns, finger pulls and sign lettering.

    Starting at: From $19.97

  8. Miniature Classic Roman Ogee Router Bit
    Miniature Classic Roman Ogee Router Bit
    Small scale projects call for small scale router bits. This bit is the perfect fit for jewelry boxes and other fine pieces.
  9. Miniature Roman Ogee Router Bit
    Miniature Roman Ogee Router Bit
    1 Review(s)
    Perfectly scaled for smaller projects such as jewelry boxes, music boxes and more.
  10. Miniature Classic Router Bit
    Miniature Classic Router Bit
    Unique "wave" profile can be used alone for fluting, or with a router table to apply a decorative edge.
  11. 3/8" Signmaking Carbide Router Bit, 1/4" Shank
  12. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  13. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  14. Rockler Classical Roman Ogee Plunge Bits
    Rockler Classical Roman Ogee Plunge Bits
    1 Review(s)
    This decorative plunge bit is often used to create a faux panel door effect in slab door and drawer fronts.

    Starting at: From $23.99

  15. Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $24.99

  16. Cove Router Bits-1/4 Inch Shank
    Cove Router Bits-1/4 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $24.99

  17. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $25.99

  18. Table Top Edge Router Bit
    Table Top Edge Router Bit
    Applies an attractive rounded edge to table tops and other cabinetry elements.
  19. Makes a subtle decorative edge popular on doors, drawer fronts, and other edges
    Roman Ogee Bit OE822
    Makes a subtle edge profile that is part cove, part Roman ogee—perfect for enhancing doors and drawer fronts!
  20. Make a subtle decorative edge, perfect for enhancing doors and drawer fronts
    Twin Step Ogee Bit OE833
    Stepped ogee edge profiling bit creates a distinct geometric effect for your cabinetry projects.
  21. Classical Edge Bead Bit
    Classical Edge Bead Bit
    This bit adds a classic beaded edge to your table tops, doors and drawer fronts.
  22. Freud Canoe Joint Bits
    Freud Canoe Joint Bits
    These two bits cut corresponding beads and coves to create a hinging joint that's perfect for curved items, especially canoes.

    Starting at: From $49.97

  23. Freud Rail & Stile Profile Bit
    Freud Rail & Stile Profile Bit
    A simple, affordable router bit for creating frame and panel doors.
  24. Make a subtle decorative edge, perfect for enhancing doors and drawer fronts
    Decorative Ogee Bit OE869
    1 Review(s)
    Cuts a decorative edge that is perfect for enhancing doors and drawer fronts!

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X