Router Bits

  1. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  2. Undersized Router Bits-1/4 Inch  Shank
    Undersized Router Bits-1/4 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  3. Undersized Router Bits-1/2 Inch  Shank
    Undersized Router Bits-1/2 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  4. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  5. Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)
    Sale

    Regular Price: $21.99

    Special Price $15.39

  6. 2 Flute Trim Router Bit
    Piloted Flush Trim Bits 1/4" Shank
    Use these bits to trim veneers and solid stock flush with the underlying substrate.

    Starting at: From $15.99

  7. Replacement Router Bit for Porter-Cable Dovetail Jig
    Replacement Router Bit for Porter-Cable Dovetail Jig
    1 Review(s)
    Perfectly sized for the 12" Porter-Cable Dovetail Jig.
  8. The up-cut design helps keep the mortise clear of chips and shavings while you cut.
    Up-Cut Spiral Mortising Router Bits
    6 Review(s)
    Up-spiral design directs chips up and out of mortises and grooves, resulting in a cooler cutter, less burning and a long cutting life.

    Starting at: From $17.99

  9. 2 Flute Trim Router Bit
    Piloted Flush Trim Bits 1/2" Shank
    Use these router bits to trim veneers and solid stock flush with the underlying substrate or cabinet parts.

    Starting at: From $17.99

  10. Freud # 42-110 Bearing Flush Trim Bits, 1/2" Dia. x 1" H x 1/2" Sh.
    Freud # 42-110 Bearing Flush Trim Bits, 1/2" Dia. x 1" H x 1/2" Sh.
    One inch of carbide makes this the perfect flush trim bit for standard 3/4" stock.
  11. Onsrud Down-Cut Spiral Bits
    Onsrud Down-Cut Spiral Bits
    Down-shear spiral action prevents chip-out and fuzzing at the edge of the cut—ideal for cutting clean dados, grooves and rabbets.

    Starting at: From $19.39

  12. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/4" Shank
  13. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank
    Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank
    In one easy pass, this unique bit trims the parts flush and leaves a subtle triangular kerf along the seam.
  14. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  15. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $25.99

  16. Rockler Pattern Flush Trim Bits for Plunge Routers
    Rockler Pattern Flush Trim Bits for Plunge Routers
    1 Review(s)
    Top-mounted guide bearings make it easy to use these bits with top-mounted templates.

    Starting at: From $27.59

  17. Rockler Bullnose Radius Bits
    Rockler Bullnose Radius Bits
    Cut perfectly rounded edges in a snap!

    Starting at: From $29.99

  18. Freud Downshear Helix Flush Trim Bits
    Freud Downshear Helix Flush Trim Bits
    3 Review(s)
    With the bearing mounted on the bottom end, this bit works perfectly for trimming face frames flush to cabinet sides.

    Starting at: From $32.97

  19. 3/4" Diameter X 1" High Molding Bit
    3/4" Diameter X 1" High Molding Bit
    1 Review(s)
    Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails.
  20. Specialty Molding Router Bit for Decorative Edges

    Starting at: From $37.99

  21. Freud Quadra-Cut™ Rounding Over Bits
    Freud Quadra-Cut™ Rounding Over Bits
    11 Review(s)
    Two large wings shear upward for a smooth, easy cut, while the two small wings shear downward to eliminate splintering and fuzzing on the face.

    Starting at: From $38.97

  22. Triple Bead Router Bit
    Triple Bead Router Bit
    3 Review(s)
    Cut one, two, or three beads in a single pass—just raise or lower the bit as needed!
  23. Rockler Rabbeting Bit Set
    Rockler Rabbeting Bit Set
    1 Review(s)
    Includes four interchangeable bearings for cutting 5/16", 3/8", 7/16" and 1/2" deep rabbets.
  24. Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors
    Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors
    5 Review(s)
    Joint 1/16", 1/8", or 3/16" of material off of stock up to 2" thick—all with just two router passes!

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X