Router Bits

  1. Makes a subtle decorative edge popular on doors, drawer fronts, and other edges
    Roman Ogee Bit OE822
    Makes a subtle edge profile that is part cove, part Roman ogee—perfect for enhancing doors and drawer fronts!
  2. Back Cutter Router Bit
    Back Cutter Router Bit
    Makes a relief cut on the back side of a flat or raised panel so it fits into the groove of your door frame.
  3. Make a subtle decorative edge, perfect for enhancing doors and drawer fronts
    Ogee Door Bit OE804
    Cuts a decorative coved edge, perfect for enhancing doors and drawer fronts!
  4. 21137 - 1-1/4' Diameter x 1-5/8' Height Raised Panel Router Bit - Straight Vertical
    Raised Panel Router Bit - Straight
    4 Review(s)
    Vertical orientation lets you machine beautiful raised panels with an ordinary 2 HP router!
  5. Raised Panel Router Bit - Ogee
    Raised Panel Router Bit - Ogee
    2 Review(s)
    Lets you raise panels without the added expense of a high-powered 3 HP router.
  6. 21151 - Vertical Raised Panel Router Bit - Cove Vertical
    Rockler Cove Vertical Raised Panel Router Bit, 1-1/4" Diameter x 1-5/8"H
    Vertical orientation lets you raise panels without needing an expensive 3 HP router.
  7. 21515 and 38973 Raised Panel Router Bit - Straight  Horizontal Bit
    Raised Panel Router Bit - Straight - Horizontal
    4 Review(s)
    Horizontal panel-raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  8. Horizontal Raised Panel Router Bits
    Raised Panel Router Bit - Ogee - Horizontal
    2 Review(s)
    Horizontal panel raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  9. 21522  - Horizontal Raised Panel Router Bit - Cove
    Raised Panel Router Bit - Cove - Horizontal
    3 Review(s)
    Horizontal panel raising bits cut more smoothly than vertical bits, and allow you to raise curved panels.

    Starting at: From $64.99

  10. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit
    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit
    1 Review(s)
    Raise classic ogee panels for your own custom raised panel doors.
  11. Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit
    Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit
    Freud's Quadra-Cut technology yields crisp, clean edges every time, even with cross-grain cuts in difficult materials!
  12. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit
    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit
    An ogee panel raiser with revolutionary Quadra-Cut technology—perfect for raised panel doors, table tops and moldings.
  13. Freud Quadra-Cut™ Bevel Raised Panel Bits
    Freud Quadra-Cut™ Bevel Raised Panel Bits
    1 Review(s)
    Two large wings shear upward for a smooth, easy cut, while the two small wings shear downward to eliminate splintering and fuzzing on the face.

    Starting at: From $98.97

  14. Cuts both the front and the back in one pass for perfectly fitting rails and stiles
    Sale
    Ogee Raised Panel Bit with Back Cutter P605
    Guide bearing and horizontal orientation allow you to raise panels for both straight and arched top doors!

    Regular Price: $137.79

    Special Price $103.34

  15. Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit
    Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit
    1 Review(s)
    Two large up-shear cutters smoothly hog out the raised panel profile, while two smaller down-shear cutters define the edge of the field with no fuzzing or splinters.
  16. Freud Quadra-Cut™ Cove Raised Panel Bits
    Freud Quadra-Cut™ Cove Raised Panel Bits
    2 Review(s)
    Two large wings shear upward for a smooth, easy cut, while the two small wings shear downward to eliminate splintering and fuzzing on the face.

    Starting at: From $104.47

  17. Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters
    Freud Quadra-Cut™ Ogee Raised Panel Bits with BackCutters
    1 Review(s)
    Freud's exclusive Quadra-Cut 4-cutter design provides crisp, clean edges, even with cross-grain cuts in difficult materials.
  18. Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters
    Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters
    4 Review(s)
    Quadra-Cut design uses two upshear cutters to hog out the majority of the waste, while two downshear cutters clean up any fuzzing along the edges.
  19. Cuts both the front and the back in one pass for perfectly fitting rails and stiles
    Cove Raised Panel Bit P602
    Guide bearing and horizontal orientation allow you to raise panels for both straight and arched top doors!
  20. Cuts both the front and the back in one pass for perfectly fitting rails and stiles
    Straight Panel Bit with Back Cutter P636
    Guide bearing and horizontal orientation allow you to raise panels for both straight and arched top doors!
  21. Vertical Panel Router Bit Set With Wooden Case
    Vertical Panel Router Bit Set With Wooden Case
    1 Review(s)
    Build beautiful, long-lasting raised panel doors of all sizes with this three piece boxed set.
  22. Horizontal Panel Router Bit Set With Wooden Case
    Horizontal Panel Router Bit Set With Wooden Case
    5 Review(s)
    Build beautiful, long-lasting raised panel doors of all sizes with this three piece boxed set.
  23. 40432 - Complete 3-Piece Shaker Raised Panel Bit Set
    Shaker Raised Panel 3-Piece Bit Set
    Combines a rail and stile set with a panel raiser for building beautiful Shaker raised panel doors!

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X