Router Bits

  1. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  2. Rockler Keyhole Slot Router Bits
    Rockler Keyhole Slot Router Bits
    7 Review(s)
    This twin-flute cutter captures a screw head for fastening wall hung items. Also used for knock-down furniture.

    Starting at: From $14.99

  3. 3/8" Signmaking Carbide Router Bit, 1/4" Shank
  4. The up-cut design helps keep the mortise clear of chips and shavings while you cut.
    Up-Cut Spiral Mortising Router Bits
    6 Review(s)
    Up-spiral design directs chips up and out of mortises and grooves, resulting in a cooler cutter, less burning and a long cutting life.

    Starting at: From $17.99

  5. 21515 and 38973 Raised Panel Router Bit - Straight  Horizontal Bit
    Raised Panel Router Bit - Straight - Horizontal
    4 Review(s)
    Horizontal panel-raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  6. Rockler Drawer Lock Router Bit
    Sale
    Rockler Drawer Lock Router Bit
    18 Review(s)
    Rout strong, precise corner joints for drawer boxes with just one bit!

    Regular Price: $37.99

    Special Price $26.59

  7. 22627-1-3/4' Dia. X 3/4' High x 1/2' Shank 45 Degree Lock Miter Router Bit
    Sale
    45° Lock Miter Router Bit -1/2'' Shank
    20 Review(s)
    Cuts strong, fast miter joints for drawer boxes and cabinet cases.

    Regular Price: $57.99

    Special Price $39.99

  8. 1/2'' Pattern Router Bit
    1/2'' Pattern Router Bit
    5 Review(s)
    A bearing-guided pattern bit for routing dadoes and hinge mortises with absolute precision and repeatability.
  9. Undersized Router Bits-1/2 Inch  Shank
    Undersized Router Bits-1/2 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  10.  Cut a huge variety of dovetails � ideal for use with our Distinctive Series Dovetail Templates.
    Distinctive Series Dovetail Router Bits, 8mm Shank
    2 Review(s)

    8° dovetail angle mimics the look of genuine hand-cut dovetails.

    Starting at: From $17.99

  11. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  12. Rockler Classical Roman Ogee Plunge Bits
    Rockler Classical Roman Ogee Plunge Bits
    1 Review(s)
    This decorative plunge bit is often used to create a faux panel door effect in slab door and drawer fronts.

    Starting at: From $23.99

  13. Shutter Bead Router Bit
    Shutter Bead Router Bit
    Adds a subtle decorative touch to the rails and stiles of your custom shutters.
  14. 5/8" Signmaking Carbide Router Bit, 1/4" Shank
  15. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  16. Pattern Flush Trim Router Bit- 1/2 Inch Shank
    Pattern Flush Trim Router Bit- 1/2 Inch Shank
    21 Review(s)
    Fast, smooth flush-cutting capabilities.

    Starting at: From $26.99

  17. Core Box Router Bits-1/2"  Shank
    Core Box Router Bits-1/2" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $23.99

  18. Includes one arbor, two 22mm bearings, and two cutters. Make a Groove bit (shown) or a Tongue bit by attaching the second cutter.
    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank
    10 Review(s)
    Convertible arbor can be configured to cut both the tongue and groove for 3/4" stock.
  19. Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)
    Sale

    Regular Price: $21.99

    Special Price $15.39

  20. Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height
    Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height
    21 Review(s)
    With the quide bearing mounted at the top, this bit provides excellent visibility of the cut line when using templates.
  21. Undersized Plywood Router Bit Set
    New
    Undersized Plywood Router Bit Set
    10 Review(s)
    Specially designed to cut perfect-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.
  22. Rabbeting Router Bit
    Sale
    Rabbeting Router Bit
    15 Review(s)
    Includes a set of four bearings to achieve the following cutting depths: 5/16", 3/8", 7/16" and 1/2".

    Regular Price: $39.99

    Special Price $27.99

  23. Freud Adjustable Tongue & Groove Bit Set
    Freud Adjustable Tongue & Groove Bit Set
    7 Review(s)
    Produces perfectly fitted tongue and groove joints.
  24. Freud 97-154, 3-Piece Door Set
    Sale
    Freud 97-154, 3-Piece Door Set
    3 Review(s)
    Mill precision parts for your own custom raised panel doors!

    Regular Price: $183.47

    Special Price $128.42

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X